How can I initialize the xScale of a xygraph with a string like '03-00010' ?

I have two arrays. the first one is an array with decimal numbers (i.e. 0.9 ; 1.2 ; 5.0) and the second array is a string array (i.e. 03-01; 03-23; 05-001). I want to plot the pairs of values with a xygraph. How can I format the second array to scale the x-axis?

The only thing that an XY graph can plot is two numeric arrays - not strings. Either axis can display a numeric as date/time so if your string values represent this, then you convert the strings and do it. You could put the string values in an adjacent indicator and use a legend i.e. 1=03-01,2=03-23.

Similar Messages

  • How can I sync the contacts in my phone with those on my MacBook Pro? I already have an iCloud account, and everything else (calendars,music, etc.I is already synched) but the contacts won't.

    How can I sync the contacts in my phone with those on my MacBook Pro? I already have an iCloud account, and everything else (calendars,music, etc.I is already synched) but the contacts won't.

    Ok.
    Open System Preferences, Apple Logo icon in the menu bar and then System Preferences or the Sys Pref iocon in the Dock and go to the Internet Accounts area and look at your iCloud account. It should list what is and isn't synced by a checkmark next to each item.
    Also in the Contacts app click on Contacts in the menu bar and select Preferences then accounts and make sure your iCloud account is listed. You can also do that from the Internet Accounts area in System Preferences.

  • HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    Very simple.  Turn off Find my iDevice, then  Tap Settings, General, Erase, Erase all content and settings.

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?

    How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
    I have seen this question asked previously and it seems there is no answer.
    I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
    ... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.

    Press CTRL + 0
    Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
    You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
    After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
    If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
    You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
    If there are particular sites that still present a problem, feel free to post their URLs.
    You can find more information about the zoom features Firefox offers in these articles:
    [[Text zoom]] - For zooming text only
    [[Page zoom]] - For zooming the whole page (including images etc.)

  • In Messages, how can I get the most recent entries to appear on top, like with my emails?  Thanks!

    In Messages, how can I get the most recent entries to appear on top, like with my emails?  Thanks!

    HI,
    A Note.
    Technically the most recent Conversation (or Chat) that has a new message (be it iMessage or IM) will move to the top in the list on the left if it is set in the View  Menu to do so.
    Obviously this does need more than one Conversation or Chat to be listed to work.
    It does not change the focus of the Chat/Conversation you are viewing.
    iChat - the forerunner naver had an option to invert the chats.
    The iChat Feedback page is where I use.
    You will also see it does not list iChat 6 depsite listing Lion.
    In this sense it has always beeen out of step on the iChat/Messages version front  (it took me a long time via the Lounge and Host help to get it on the list of pages to be updated on New OS versions)
    11:00 PM      Friday; June 28, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How can i get the "Do recursive listing.vi" with teh sub-vi, because my is lost???

    How can i get the "Do recursive listing.vi" with the sub-vi, because my is lost???
    THX

    I think you must be using LV 8.x...
    Do a LabVIEW repair to get it back or else, use the attached one.
    - Partha
    LabVIEW - Wires that catch bugs!
    Attachments:
    Recursive File List.vi ‏33 KB

  • How can I change the payment method to None with gift card balance.

    How can I change the payment method to None with gift card balance?
    I already have an Apple ID account with no credit card but when I try to log in download free app it says Apple ID has not been used in iTunes store please review your account and it appears the billing info and there's no none in the option..how can I solve this so that I can used my Apple ID and can download free apps?

    Hi ..
    Help here >  Why can’t I select None when I edit my payment information?HHi

  • How can I change the name of devices associated with my Apple ID in iTunes?

    We have 3 iPads and 4 iPhones in our family.  All of the iPads show up on the list of devices associated with my Apple ID as simply "iPad".  All of the iPhones show up simply as "iPhone", even though each device has a distinct name on the device itself (ie. Mark's iPhone).  How can I get the distinct name to show up on the list of devices so I can keep the list updated as we add or remove devices from our collection?

    Not it it's an @icloud.com, @me.com or @mac.com address.  In that case your choices are to either create an email alias within the existing account, which delivers email to your existing iCloud inbox (see http://help.apple.com/icloud/#/mm6b1a490a), or create a new iCoud account.  Note: alias addresses are permanently tied to the account that you create them in; they cannot be used to create a new iCloud account or be moved to a different account in the future.

  • How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

    How can I use the built-in Isight camera and an external video camera at the same time?
    I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
    Thanks

    Simple question with a not so simple answer.
    (a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations.  Digital video is processor intensive.  The only way to know if your Mac can do this it to try it.  If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus.  You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
    (b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
    How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
    (1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
    This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
    (2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
    Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
    Other iMovie versions work slightly differently.
    iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
      http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
    iMovie 8 (from iLife '09) is slightly different as explained in this article:
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
    In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
    (3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
    Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
    However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
    (If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
    (4) For FaceTime, launch the app and click the Video menu item.
    If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
    If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
    (5) I do not use Skype oir Oovoo.  For those or other apps, see Help for each app for info on how to select your desired camera.
    Message was edited by: EZ Jim

  • How can we Restict the Char single value Variables with , , =

    Hi Experts,
    How can we Restict the Char value Variables with <, >, <=  (without selecting Inverval or only passing single value)
    For Example
    We have a standard Query 0FIAR_C03_Q1005, in this
    New Selection
    "1 - 15 Days, Posting Date<=Key Date, Clearing Date>Key Date"
    This is restricted  with the
    Clearing(0CLEAR_DATE)
    <Clearing key date(0P_KEYD3)  It is a single value SAP Exit Varible
    PostingDate(0PSTNG_DATE)
      <= Posting keydate(0P_KEYD3)  It is a single value SAP Exit Varible
    When seeing these 0P_KEYD3, 0P_KEYD3 variables in the New selection screen they looks like  >0P_KEYD3, <=0PSTNG_DATE
    if you define any custom variables these are looks like =ZV_DATE.
    to enable < , >, <= symbols for variables what we need to do.
    In other way
    Say we created one variable ZV_DATE single value, processing type as customer exit.
    for this we populated current day,
    Now Requirement is we need to display the all the records which are <= current date,
    instead of passing low and high values, i want to restrict the calday <=ZV_DATE
    New selection
    0calday
      <=ZV_DATE
    How can we achive this, this is how the business content report having the restrictions
    Please sugget me.
    Thanks
    Chandra
    Edited by: Chandra Gandla on Jun 18, 2010 11:01 AM
    Edited by: Chandra Gandla on Jun 18, 2010 11:01 AM

    Ok,
    In the InfoObject 0calday in the query designer under the filter area, under characteristic restrictions right-click over that InfoObject (0calday).
    In the next window (select Values for [0CALDAY]  Calendar Day in the dropdown box for "Show" choose Value Ranges. Under the word "Between"  dropdown box select "Less than or equal to"
    Below that word click on the button of the dropdown box Select from list.
    In the new window select instead of History Variables and double-click on your variable ZV_DATE.
    Click on the right blue arrow to move it to the right.
    And there you go.
    Tip: It exists a SAP standard variable named 0DAT which is exactly the current date (don't need to use ZV_DATE variable).
    Diogo.

  • How can I convert the ITHMB photo files to PC readable format like JPEG?

    How can I convert the ITHMB photo files on my new Iphone 4s to a PC readable format like JPEG

    Look at the link and follow instructions to convert the file taken from a different thread in this forum:
    https://discussions.apple.com/thread/2640386?start=0&tstart=0

  • I synced firefox information to the servers and exchanged my laptop. How can I get the new laptop to sync with my firefox data?

    I want to get my firefox sync data on my laptop. However, I haven't paired this device, I just have my information on the firefox servers under my account. How can I get the sync info on this new laptop?

    If you don't have a 2nd device available which is already setup with your Sync account, pairing can't be done.
    In order to set up a '''new device''' when you can't "pair", you need three things; the user account name ''(email address used)'', the password for the account, and the '''Sync Key'''.
    If you didn't make a copy of the Sync Key as prompted at the end of the Sync set up process, you can't successfully setup a new device and won't be able to recover your data.

  • How can i show the dialog of certificates when tring to sign (like CAPICOM)

    Hi,
    I'm using "Windows-MY","SunMSCAPI" to choose a certificate from the keystore to sign a document.
    1) Can i show a dialog containing the certificates in the key store like in CAPICOM?
    2) To find a solution i 've found this code (CAPICOM + JAVA) her http://www.jensign.com/JavaScience/www/CertContext/CertContext.txt
    when i compile it, "com.ms.com" et "capicom" are missing ??
    Thank You in advance for any help

    nbbbn wrote:
    In the other words how can i call the *"certificate selection dialog box"* from source code?You can't " call the *"certificate selection dialog box"* from source code" as such. What one can do is iterate through the keys and certificates in the keystore and use the results to populate a dialog.
    The problem I have is that you seem to not want to go through the documentation. Most people here will assist when you have problems but they do like to see some effort. If you had read though the JCE tutorial and done a Google search then you would have found out how process the content of a keystore. If at this point you still had a problem then posting the problem code would likely to be profitable but ...
    Best of luck.

  • [EWS][Java] How can I use the Search Filter only mails with attachments?

    Hey,
    I'm trying to search a folder ( doesn't matter  which ) for ONLY mails with attachments.
    How can I use the search filter for that purpose? 
    Thanks!

    You can drag the attachment collumn from settings and sort on that collumn
    In the main Outlook window, on the View menu, point to
    Current View, and then click Customize Current View.
    Click Fields. In the Available fields list, click the field that you want to add, and then click
    Add.
    Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

Maybe you are looking for