How can I insert a song into lots of different projects without it duplicating so many time?

I have a website where I upload a daily one minute video, and I use the same song for the opening, and the same song for the closing. I have been trying to figure out why so much space is being used. One issue is that the songs I have been using for the opening and closoing are being uploaded over and over and over again.
What is the best way to do this so that the media isn't being duplicated over and over again? The files live in itunes, so is there any way to simply reference the file from the music folder instead of having to copy the media over and over again?
Thanks.

Hmmm... I made the opening in motion, and have set it as a opening bumer. So what I typically do is drag it in to the project time line from the right side of the screen (where my bumbers are) and then add the audio (from itunes) on top of it. So that audio is being duplicated on every single event. This was the only way I knew to do it so I could easily change the date without having to always set the right keyframes. (If there is an easier way, please let me know.)
For the ending bumber I just use a small video clip I made and insert it in each timeline. So I'm assuming that is also being duplicated every single time.

Similar Messages

How can i sync some songs into my iphone 4 without deleting everything else that's in my phone

i dont have songs on my iphone 4. so i downloaded some songs on my dell laptop n put them in itunes on my laptop when i tried sync-ing all the songs to my iphone 4. it says that all my apps will be deleted. how can i synce the songs into my iphone 4 without having to delete all the other apps ??

Try syncing the apps from your iPhone to your computer then sync the music using iTunes.
iOS: How to transfer or sync content to your computer
Make sure you use the same Apple ID.

How can i insert a song in a keynote presentation?

How can i insert a song in a keynote presentation?
Thanks for tour help.

Hmmm... I made the opening in motion, and have set it as a opening bumer. So what I typically do is drag it in to the project time line from the right side of the screen (where my bumbers are) and then add the audio (from itunes) on top of it. So that audio is being duplicated on every single event. This was the only way I knew to do it so I could easily change the date without having to always set the right keyframes. (If there is an easier way, please let me know.)
For the ending bumber I just use a small video clip I made and insert it in each timeline. So I'm assuming that is also being duplicated every single time.

How can I embed a song into a keynote presentation?

how can I embed a song into a keynote presentation?

(From Keynote Help)
Adding Sound to an Individual Slide
Sound added to an individual slide plays only on the slide to which it’s been added.
Here are ways to add sound to a slide:
Drag a sound file from the Finder anywhere onto the slide canvas or to a media placeholder.
Click Media in the toolbar, choose iTunes in the Audio pane of the Media Browser, select a playlist, and then drag a file or playlist anywhere onto the slide canvas (including to a media placeholder).
The sound file is represented on the slide canvas by a speaker icon, but this icon doesn’t appear when you play the slideshow.
You can start and stop sound playback at any time while the slide is showing. When you advance to the next slide, the sound playback automatically stops. To control when the music starts and stops, select the sound file icon, and then set playback options and use the Start Audio and Stop Audio effects in the Build Inspector. For more information, see Adjusting Media Playback Settings and Creating Movie Builds.
When you add media files to your slideshow, make sure that they will be available if you transfer your document to another computer. When saving your document, make sure to select “Copy audio and movies into document” in the Save window after you choose Save or Save As. (If you don’t see the option, click the disclosure triangle next to the field, and then click Advanced Options.)
Also note that some media files are protected under copyright law. Some downloaded music may be played only on the computer where the download occurred. Make sure the computer you’re using has permission to play all the media files included in your slideshow.

How can i switch a song into a MP3 Version like in the former iTunes version ?

hello, how can i switch a song into a MP3 File like in the former Version from iTunes

Franky,
The Create New Version command always indicates the format that it presently set in your Import Setttings, which apparently is AAC. To change it to MP3, go to Edit > Preferences > General > Import Settings, and set "Import Using" to MP3 Encoder. Also select your preferred bitrate. OK out of there, and then look again at Create New Version.

How can i convert my song into .mr4 for making it my ringtone, just renaming it is not working?

how can i convert my song into .mr4 for making it my ringtone, just renaming it is not working?

Here's how:
If you are using Windows, make sure you are able to view the file extension.
http://support.microsoft.com/kb/865219
1. Select a title (.mp3 or .m4a) in your iTunes Music Library
2. Do File > Get Info on selected title (Windows do Edit > Get Info)
3. In the dialog choose Options tab
4. Set Start Time and End Time (no more than 35 secs otherwise won't work)
5. Close dialog.
6. Now control click the title (right click) and choose Create AAC Version
Note: If you don't have Create AAC version, switch in menu File > Preferences...(Windows do Edit > Preferences...) > General > Import Settings... > Import Using: AAC Encoder.
7. When it is done, drag the newly create title to the desktop.
8. Delete the newly create title in iTunes. <-- This step is important
9. Rename the title on your desktop from ringtone.m4a to ringtone.m4r
10. Drag and drop it into iTunes
Now you have a ringtone.
Make sure it is selected in iTunes > Tones for syncing with your new iPhone.

How can I list the songs in an album in iTunes without having to do it one by one? Some albums are not numbered.

How can I list the songs in an album in iTunes without having to do it one by one? Some albums are not numbered or they show 1. 1. 1. 1. 1. 1. 1.

Poor metadata needs to be corrected if the album is to display properly in iTunes. iTunes sees an "album" as any collection of tracks with the same Album title and the same Album Artist (or Artist if Album Artist isn't set). Each track of the album should have distinct Track V of W and Disc X of Y vaules. W,X,Y are optional, but X may be needed for multi disc albums.
See Gropuing tracks into albums for details.
tt2

How can I make a song into my ringtone? I have a new iphone 3GS.

How can I make a song my ringtone?

Replace the m4a extension of a sound file with m4r.
Or open m4a file in Quicktime, cut the bit you need,
then just "save as",
Then rename the .mov to m4r!
Copy the m4r to itunes.
Check ringtones are sync'd.
And your done.

Urgent -please- how can I insert my context into proxy request ?

here is par of my request after I have transformed it, to the bs request.
Routed Service
          Route to: "SkatEtilAndelsbogAnmeldelseSvarService"
     $outbound:
     <con:endpoint      name="BusinessService$dk.skat.etil$bz$SkatEtilAndelsbogAnmeldelseSvarService" xmlns:con="http://www.bea.com/wli/sb/context">
     <con:service>
     <con:operation>getAnmeldelseKvitteringModtag</con:operation>
     </con:service>
     <con:transport>
     <con:mode>request-response</con:mode>
     <con:qualityOfService>best-effort</con:qualityOfService>
     <con:request      xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <tran:headers      xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
     <http:Content-Type>text/xml</http:Content-Type>
     <http:SOAPAction>
     "http://skat.dk/etil/2011/02/11/getAnmeldelseKvitteringModtag"
     </http:SOAPAction>
     </tran:headers>
     </con:request>
     </con:transport>
     <con:security>
     <con:doOutboundWss>true</con:doOutboundWss>
     </con:security>
     </con:endpoint>
     $body (request):
     <soapenv:Body      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
     <ns:Kontekst      xmlns:ns20="http://skat.dk/etil/2011/02/11/" xmlns:ns="http://rep.oio.dk/cpr.dk/xml/schemas/core/2005/03/18/">
     <TransaktionsID>34c768d8-4f6d-4194-93b7-e77ffa8c76e6</TransaktionsID>
     <TransaktionsTid>2011-06-30T14:40:15.105+02:00</TransaktionsTid>
     </ns:Kontekst>
     <ns:AnmeldelseKvitteringModtag_I      xmlns:ns="http://skat.dk/etil/2011/02/11/">
     <ns1:AnmeldelseKvitteringModtag      xmlns:ns1="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/">
my problem is how can I insert the
<ns:Kontekst      xmlns:ns20="http://skat.dk/etil/2011/02/11/" xmlns:ns="http://rep.oio.dk/cpr.dk/xml/schemas/core/2005/03/18/">
     <TransaktionsID>34c768d8-4f6d-4194-93b7-e77ffa8c76e6</TransaktionsID>
     <TransaktionsTid>2011-06-30T14:40:15.105+02:00</TransaktionsTid>
     </ns:Kontekst>
inside
<ns:AnmeldelseKvitteringModtag_I      xmlns:ns="http://skat.dk/etil/2011/02/11/">
The context is generated using this:
<ns:Kontekst xmlns:ns20="http://skat.dk/etil/2011/02/11/">
<TransaktionsID>{fn-bea:uuid()}</TransaktionsID>
<TransaktionsTid>{fn:current-dateTime()}</TransaktionsTid>
</ns:Kontekst>

request before context:
<ns2:AnmeldelseKvitteringModtag xmlns:ns="http://rep.oio.dk/tinglysning.dk/schema/model/1/" xmlns:ns1="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/" xmlns:xd="http://www.w3.org/2000/09/xmldsig#" xmlns:ns2="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/">
<ns:AnmeldelseIdentifikator>string</ns:AnmeldelseIdentifikator>
<ns:AktoerReference>
<ns:AktoerID>string</ns:AktoerID>
<ns:KorrelationID>string</ns:KorrelationID>
</ns:AktoerReference>

<ns:SagsReference>string</ns:SagsReference>
<ns1:KoeIndikator>false</ns1:KoeIndikator>
<ns1:ProeveTinglysningIndikator>true</ns1:ProeveTinglysningIndikator>
<xd:Signature Id="string">
<xd:SignedInfo Id="string">
<xd:CanonicalizationMethod Algorithm="http://www.your.org/aeoliam/quae">
ventos

<AnyElement/>
verrantque
</xd:CanonicalizationMethod>
<xd:SignatureMethod Algorithm="http://www.sample.org/turbine/circum">
regemque

<xd:HMACOutputLength>100</xd:HMACOutputLength>
nimborum

<AnyElement/>
fremunt
</xd:SignatureMethod>

<xd:Reference Id="string" URI="http://www.my.com/profundum/sceptra" Type="http://www.test.com/iovis/flammato">

<xd:Transforms>

<xd:Transform Algorithm="http://www.sample.com/bella/nubibus">
flammas


<AnyElement/>
<xd:XPath>string</xd:XPath>
ac
</xd:Transform>
</xd:Transforms>
<xd:DigestMethod Algorithm="http://www.my.com/ac/caelumque">
speluncis

<AnyElement/>
circum
</xd:DigestMethod>
<xd:DigestValue>YXJpcw==</xd:DigestValue>
</xd:Reference>
</xd:SignedInfo>
<xd:SignatureValue Id="string">Y29uaXVueA==</xd:SignatureValue>

<xd:KeyInfo Id="string">
praeterea

<xd:KeyName>string</xd:KeyName>
<xd:KeyValue>
arce

<xd:DSAKeyValue>
<xd:P>Y2xhdXN0cmE=</xd:P>
<xd:Q>Y2lyY3Vt</xd:Q>

<xd:G>aW1wZXJpbw==</xd:G>
<xd:Y>Y2VydG8=</xd:Y>

<xd:J>cXVpc3F1YW0=</xd:J>
<xd:Seed>ZXQ=</xd:Seed>
<xd:PgenCounter>YWM=</xd:PgenCounter>
</xd:DSAKeyValue>
<xd:RSAKeyValue>
<xd:Modulus>ZmV0YQ==</xd:Modulus>
<xd:Exponent>YWM=</xd:Exponent>
</xd:RSAKeyValue>

<AnyElement/>
sed
</xd:KeyValue>
<xd:RetrievalMethod URI="http://www.test.org/pectore/austris" Type="http://www.your.gov/certo/dare">

<xd:Transforms>

<xd:Transform Algorithm="http://www.any.com/volutans/dedit">
faciat


<AnyElement/>
<xd:XPath>string</xd:XPath>
magno
</xd:Transform>
</xd:Transforms>
</xd:RetrievalMethod>
<xd:X509Data>

<xd:X509IssuerSerial>
<xd:X509IssuerName>string</xd:X509IssuerName>
<xd:X509SerialNumber>100</xd:X509SerialNumber>
</xd:X509IssuerSerial>
<xd:X509SKI>ZXQ=</xd:X509SKI>
<xd:X509SubjectName>string</xd:X509SubjectName>
<xd:X509Certificate>YWM=</xd:X509Certificate>
<xd:X509CRL>ZXQ=</xd:X509CRL>

<AnyElement/>
</xd:X509Data>
<xd:PGPData>

<xd:PGPKeyID>cmVnZW1xdWU=</xd:PGPKeyID>

<xd:PGPKeyPacket>YW5ub3M=</xd:PGPKeyPacket>

<AnyElement/>
<xd:PGPKeyPacket>aW5maXhpdA==</xd:PGPKeyPacket>

<AnyElement/>
</xd:PGPData>
<xd:SPKIData>
<xd:SPKISexp>dmVudG9z</xd:SPKISexp>

<AnyElement/>
</xd:SPKIData>
<xd:MgmtData>string</xd:MgmtData>

<AnyElement/>
tenens
</xd:KeyInfo>

<xd:Object Id="string" MimeType="string" Encoding="http://www.my.org/rapidum/habenas">
insuper

<AnyElement/>
mollitque
</xd:Object>
</xd:Signature>
</ns2:AnmeldelseKvitteringModtag>
This is after the transformation.
Routed Service
          Route to: "SkatEtilAndelsbogAnmeldelseSvarService"
     $outbound:
     <con:endpoint      name="BusinessService$dk.skat.etil$bz$SkatEtilAndelsbogAnmeldelseSvarService" xmlns:con="http://www.bea.com/wli/sb/context">
     <con:service>
     <con:operation>getAnmeldelseKvitteringModtag</con:operation>
     </con:service>
     <con:transport>
     <con:mode>request-response</con:mode>
     <con:qualityOfService>best-effort</con:qualityOfService>
     <con:request      xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <tran:headers      xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
     <http:Content-Type>text/xml</http:Content-Type>
     <http:SOAPAction>
     "http://skat.dk/etil/2011/02/11/getAnmeldelseKvitteringModtag"
     </http:SOAPAction>
     </tran:headers>
     </con:request>
     </con:transport>
     <con:security>
     <con:doOutboundWss>true</con:doOutboundWss>
     </con:security>
     </con:endpoint>
     $body (request):
     <soapenv:Body      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
     <ns:Kontekst      xmlns:ns20="http://skat.dk/etil/2011/02/11/" xmlns:ns="http://rep.oio.dk/cpr.dk/xml/schemas/core/2005/03/18/">
     <TransaktionsID>93235d7a-131d-45a7-a36b-34fd9c83343f</TransaktionsID>
     <TransaktionsTid>2011-06-30T15:35:55.567+02:00</TransaktionsTid>
     </ns:Kontekst>
     <ns:AnmeldelseKvitteringModtag_I      xmlns:ns="http://skat.dk/etil/2011/02/11/">
     <ns1:AnmeldelseKvitteringModtag      xmlns:ns1="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/">
     <ns2:AnmeldelseIdentifikator      xmlns:ns2="http://rep.oio.dk/tinglysning.dk/schema/model/1/">string</ns2:AnmeldelseIdentifikator>
     <ns2:AktoerReference      xmlns:ns2="http://rep.oio.dk/tinglysning.dk/schema/model/1/">
     <ns3:AktoerID      xmlns:ns1="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/" xmlns:ns="http://rep.oio.dk/tinglysning.dk/schema/model/1/" xmlns:ns2="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/" xmlns:xd="http://www.w3.org/2000/09/xmldsig#" xmlns:ns3="http://rep.oio.dk/tinglysning.dk/schema/model/1/">string</ns3:AktoerID>
     <ns3:KorrelationID      xmlns:ns1="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/" xmlns:ns="http://rep.oio.dk/tinglysning.dk/schema/model/1/" xmlns:ns2="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/" xmlns:xd="http://www.w3.org/2000/09/xmldsig#" xmlns:ns3="http://rep.oio.dk/tinglysning.dk/schema/model/1/">string</ns3:KorrelationID>
     </ns2:AktoerReference>
     <ns2:SagsReference      xmlns:ns2="http://rep.oio.dk/tinglysning.dk/schema/model/1/">string</ns2:SagsReference>
     <ns2:KoeIndikator      xmlns:ns2="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/">false</ns2:KoeIndikator>
     <ns2:ProeveTinglysningIndikator      xmlns:ns2="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/">true</ns2:ProeveTinglysningIndikator>
     <xd:Signature      Id="string" xmlns:xd="http://www.w3.org/2000/09/xmldsig#">
     <xd:SignedInfo      Id="string" xmlns:ns1="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/" xmlns:ns="http://rep.oio.dk/tinglysning.dk/schema/model/1/" xmlns:ns2="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/">
     <xd:CanonicalizationMethod      Algorithm="http://www.your.org/aeoliam/quae">
     ventos
     
     <AnyElement/>
     verrantque
     </xd:CanonicalizationMethod>
     <xd:SignatureMethod      Algorithm="http://www.sample.org/turbine/circum">
     regemque
     
     <xd:HMACOutputLength>100</xd:HMACOutputLength>
     nimborum
     
     <AnyElement/>
     fremunt
     </xd:SignatureMethod>
     
     <xd:Reference      Id="string" URI="http://www.my.com/profundum/sceptra" Type="http://www.test.com/iovis/flammato">
     
     <xd:Transforms>
     
     <xd:Transform      Algorithm="http://www.sample.com/bella/nubibus">
     flammas
     
     
     <AnyElement/>
     <xd:XPath>string</xd:XPath>
     ac
     </xd:Transform>
     </xd:Transforms>
     <xd:DigestMethod      Algorithm="http://www.my.com/ac/caelumque">
     speluncis
     
     <AnyElement/>
     circum
     </xd:DigestMethod>
     <xd:DigestValue>YXJpcw==</xd:DigestValue>
     </xd:Reference>
     </xd:SignedInfo>
     <xd:SignatureValue      Id="string" xmlns:ns1="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/" xmlns:ns="http://rep.oio.dk/tinglysning.dk/schema/model/1/" xmlns:ns2="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/">Y29uaXVueA==</xd:SignatureValue>
     
     <xd:KeyInfo      Id="string" xmlns:ns1="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/" xmlns:ns="http://rep.oio.dk/tinglysning.dk/schema/model/1/" xmlns:ns2="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/">
     praeterea
     
     <xd:KeyName>string</xd:KeyName>
     <xd:KeyValue>
     arce
     
     <xd:DSAKeyValue>
     <xd:P>Y2xhdXN0cmE=</xd:P>
     <xd:Q>Y2lyY3Vt</xd:Q>
     
     <xd:G>aW1wZXJpbw==</xd:G>
     <xd:Y>Y2VydG8=</xd:Y>
     
     <xd:J>cXVpc3F1YW0=</xd:J>
     <xd:Seed>ZXQ=</xd:Seed>
     <xd:PgenCounter>YWM=</xd:PgenCounter>
     </xd:DSAKeyValue>
     <xd:RSAKeyValue>
     <xd:Modulus>ZmV0YQ==</xd:Modulus>
     <xd:Exponent>YWM=</xd:Exponent>
     </xd:RSAKeyValue>
     
     <AnyElement/>
     sed
     </xd:KeyValue>
     <xd:RetrievalMethod      URI="http://www.test.org/pectore/austris" Type="http://www.your.gov/certo/dare">
     
     <xd:Transforms>
     
     <xd:Transform      Algorithm="http://www.any.com/volutans/dedit">
     faciat
     
     
     <AnyElement/>
     <xd:XPath>string</xd:XPath>
     magno
     </xd:Transform>
     </xd:Transforms>
     </xd:RetrievalMethod>
     <xd:X509Data>
     
     <xd:X509IssuerSerial>
     <xd:X509IssuerName>string</xd:X509IssuerName>
     <xd:X509SerialNumber>100</xd:X509SerialNumber>
     </xd:X509IssuerSerial>
     <xd:X509SKI>ZXQ=</xd:X509SKI>
     <xd:X509SubjectName>string</xd:X509SubjectName>
     <xd:X509Certificate>YWM=</xd:X509Certificate>
     <xd:X509CRL>ZXQ=</xd:X509CRL>
     
     <AnyElement/>
     </xd:X509Data>
     <xd:PGPData>
     
     <xd:PGPKeyID>cmVnZW1xdWU=</xd:PGPKeyID>
     
     <xd:PGPKeyPacket>YW5ub3M=</xd:PGPKeyPacket>
     
     <AnyElement/>
     <xd:PGPKeyPacket>aW5maXhpdA==</xd:PGPKeyPacket>
     
     <AnyElement/>
     </xd:PGPData>
     <xd:SPKIData>
     <xd:SPKISexp>dmVudG9z</xd:SPKISexp>
     
     <AnyElement/>
     </xd:SPKIData>
     <xd:MgmtData>string</xd:MgmtData>
     
     <AnyElement/>
     tenens
     </xd:KeyInfo>
     
     <xd:Object      Id="string" MimeType="string" Encoding="http://www.my.org/rapidum/habenas" xmlns:ns1="http://rep.oio.dk/tinglysning.dk/schema/anmeldelse/1/" xmlns:ns="http://rep.oio.dk/tinglysning.dk/schema/model/1/" xmlns:ns2="http://rep.oio.dk/tinglysning.dk/svarservice/message/anmeldelse/1/">
     insuper
     
     <AnyElement/>
     mollitque
     </xd:Object>
     </xd:Signature>
     </ns1:AnmeldelseKvitteringModtag>
     </ns:AnmeldelseKvitteringModtag_I>
     </soapenv:Body>

In GB, I need to insert an audio track. When I try, it obliterates part of the adjacent bridge (track). How can I insert an audio track in an audio timeline without stepping all over clean material? Is it possible to recover the "clean" track bridge?

Am doing an audio timeline in GB. Need to insert a corrected section of track. When I try the insert, it knocks out the top part of the adjacent track bridge/element. How can I insert cleanly in a timeline? Is it possible to "recover" the good track that was "stepped on?"

Undo what?
Insert in a new track?
I don't think so. I've started an audio book and I'm doing chapter long segments (assuming I can make simple corrections, such as ones made in iMovie and numerous other video editing programs. Routine edits in GB are simple and intuitive. I cannot wrap my mind around the fact that I'm prevented from doing a simple drag and drop, import or paste a two-sentence audio clip. Nor can I find any reference to straightforward audio elements.
Any suggestions you might have would be appreciated.

How can I insert a image into a BLOB column in a table?

I am using forms6i against a 10gR2 database and I have one table with a BLOB column and I try to insert a image into this column. I get ORA-01461 error.
The curious case is that in another table with a BLOB column it works very fine.
What happens with the first table? How can I avoid the error?
Thanks in advance.

Hi hyue,
Thanks for visiting Apple Support Communities.
If you would like to add an image to a project in iMovie for iOS, see this article for helpful steps:
iMovie for iOS (iPad): Add photos to a project
http://support.apple.com/kb/PH3171
All the best,
Jeremy

How can you insert foreign letters into pages in Maverick? The old option of holding down the key has disappeared.

After downloading Mavericks on the MacBook Air, the ability to hold down a key and insert a foreign language symbol or letter disappeared. How can foreign language alphabet symbols/letters be inserted into Pages?

Are you still using the US keyboard layout?
Pending a solution to restore the Character Picker, you can use the traditional option key shortcuts for many characters, e.g. option + e, then e produces é.
Plus you can use Edit > Special Characters to bring up the Character Viewer.

HT1535 Once I have songs in mt ipod, How can I separate the songs into folders?

Once I have songs in my IPod, how can I separate them into folders such as favorites, etc.?

That sort of thing is best done in iTunes. And by "folders", I assume you mean Playlists.
In iTunes, you can create Playlists and then sync those to your iPod. The music will still be listed by artist, album etc,. but if you go into the Playlists menu, you will see the songs grouped by Playlists, according to your choices.
As you mentioned favourites; on your iPod you can give a song a star rating, from one to five stars. It's possible to create a Smart Playlist in iTunes which will automatically add (for example) three, four and five star rated songs to a Playlist, but not the songs with no rating or just one or two stars.
So if you were listening to a song and decided there and then to give it a four-star rating, then at the next Sync with your iTunes Library, that song would be added to your Smart Playlist which is then also included on the iPod. (In theory, it should go into that Playlist on your iPod without connecting to your iTunes Library, but that doesn't always work.)

How can I convert a song into a ringtone from my 11.2 iTunes library and sync it to my IPhone 5S? Is there a special

How do I convert an iTunes song into a ringtone from my 11.2 iTunes library and then sync it to my iPhone 5S? Is there a special process, and if so, what are the steps in order to do this? My computer is a Windows XP, btw. Any tips/suggestions/answers would be helpful. Thanks.

http://www.everythingicafe.com/quick-tips-how-to-delete-songs-from-your-iphone-i pad-or-ipod-touch/2012/02/14/

How can I Insert a BLOB into a Table from Java?

I have a Java class that creates an xml file from data in a non-sql data source. After it successfully creates and saves the file it inserts a record into an Oracle table to log the fact that an xml file was created.
Now the guy in the warehouse wants to get an email with the file attached. I have been looking into the apex_mail package, because we already have a procedure using htmldb_mail. However, that procedure is on our old server with HTMLDB 1.6 and it is not sending any attachments.
I think I have most of the apex_mail worked out, but I'm stuck on the blob thing. This is what I have so far:
* The Java program creates a String object called xmlDoc
* After xmlDoc is fully constructed, the file is written to the (Linux) server. This is accomplished with the following:
// writing the xmlDoc
fileDest = "/home/ewh/XMLOUT/";
fileName = "OrderEW_"\+orderNbr\+"_"\+ticketNbr\+".xml";
FileWriter fstream = new FileWriter(fileDest+fileName);
BufferedWriter out = new BufferedWriter(fstream);
out.write(xmlDoc);
out.close();
* Next I insert a record into the log file with:
// Add a record to the Oracle order_email table to let the mail process know that
// a new xml file is ready to be e-mailed to operations.
emailLogInsertQuery = " insert into ewh.order_email ( file_name, create_date ) ";
emailLogInsertQuery += " values ('"\+fileName\+"', sysdate)";
oraAction = oraStmt.executeUpdate( emailLogInsertQuery );
All of this is working fine so far. Now, I have added a blob type field to the order_email table, but I have no idea what to stick in there so that I have everything that apex_mail.add_attachment needs.
Here's a description of the order_email table:
SQL> desc ewh.order_email;
Name Type Nullable Default Comments
FILE_NAME VARCHAR2(30) Y
FILE_BLOB BLOB Y
CREATE_DATE DATE Y
SEND_DATE DATE Y
Thanks ever so much,
Gregory
Edited by: Canis Polaris on Jun 10, 2009 2:10 PM - Added escapes as necessary to show the plus signs around Java variables.

Hi,
From within APEX one can enter blob data in database tables, view the data and also update the data. Also one can send a blob attachment in an email.
May be you can follow a combination of the following OBEs to insert BLOB data and send BLOB data from APEX:
http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm
http://www.oracle.com/technology/obe/apex/apex31nf/apex31email.htm
-Priyanka

How can I insert a song into lots of different projects without it duplicating so many time?

Similar Messages

Maybe you are looking for