How can i install ati radeon 9600 pro

i install kernel-2.6.3 and xfree86-4.4.0, i neet install ati-drivers?
because of i run xf86config seting can't OK!

I believe you should get basic functionality using the "ati" driver from XFree86 - not "radeon". I know the XFree86 driver in 4.3.99 works with a Radeon 9600, so I suppose 4.4.0 will work too.
However, you will need to install the proper ATI drivers if you wish to obtain full performance from your card.

Similar Messages

ATI Radeon 9600 Pro / 256MB + Leopard

Hello i have problem to install correct my ATI Radeon 9600 Pro / 256MB. I Installed ATI Radeon 9600 Pro / 64 MB on my mac, because i could not install Logic Pro 8, and I Installed succesful. Install programm said by ATI Radeon 9600 Pro / 256MB that Quartz extreme are not supported, and I have 0 MB VRAM. That's not right. I Tried install update for ATi, after no display. I install Grafic update for OSX and the same. I was found that in system / Library / Extensions/ are ATI Radeon 9700.kext . When I delete this file i can run my Cinema 30'' display, but I cannot run Quartz Extreme. But this card are supported for Quartz extreme. When I put my old card
ATI Radeon 9600 Pro 64MB - is supported for Quartz Extreme but my display Cinema 30'' can only 1280 x 800. What can I do ?
Message was edited by: knoche

Das Problem ist gefunden. Der Mac wurde 2003 gekauft, und wie viele von dieser Serie waren Motherboard fehlerhaft. Ich habe 2 davon. Die Motherboards waren dann 2004 ausgetauscht zu unterschiedlichen Zeiten. Der 1. in April andere November. Dann war alles scheintbar O.K.
Erst jetzt haben wir gesehen durch den Austausch von Grafikkarten das etwas nicht stimmt.
ES WAR MOTHERBOARD DIE FEHLERHAFT IST. In 2. G5 von 2003 geht die Karte einfach wunderbar. Ich hofe das Ich damit helfe den Tausenden da draussen die gleiche Problem haben vor allem in Apple forum, und keiner hat Lösung.
Vielen Dank an die Firma Colormatch - die Jungs sind einfach Klasse Schlau.

Installing a Radeon 9600 Pro ..

I picked up a new ATI Radeon 9600 Pro for my PowerMAC G5 D2.3 to run my 30" ACD.
I was going over the installation booklet and its all in PC lingo.
I have done sooo much reading/researching on the net the last few hours i have become STOOOPID.
can someone please explain this to me.. my biggest question is how to uninstall my current graphics card. i dont know why its escaping me but it is..
this is the original:
ATI Radeon 9600
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Thanks, Happy Holidays
cw
< Edited by Host >

Hey Thomas...
i dont know WHY i was trying to "over think" this installation.. this ATI packaging *** !! since its a dual card ie: Mac and PC its all about how to install in the PC.
i was reading a bunch of tech issues with this card and i got a little paranoid about doing something wrong..
i did just load it and believe its all in place BUT, . . my 30" ACD is still just showing a max res of 1280x800
will resetting the PMU help this ??
i am going to switch DVI ports again, and restart
THANKS,
cw

1360 X 768 Resolution with ATI Radeon 9600 Pro

Maybe this isn't the right forum, but I've been surfing for hours with no luck so please forgive me if this seems out of place.
I output a show recently to QuickTime at 720 24 fps. I'd like to watch it on my 40" Samsung 720 HD TV. I cabled up and managed to get a picture in nearly fullscreen and nearly appropriate aspect ratio, but it doesn't look all that hot. Samsung tells me I want to set my Display settings on my Mac to 1360 x768 to achieve optimum picture. I told them I don't have that option in my settings. They said I probably need to update my driver on my ATI Radeon 9600 Pro video card. I did, still no 1360x768 setting. They said I might want to install the ATI Displays utility. That doesn't seem to offer anything useful. ATI's online support says I might want to install ATI's latest ROM updater, but I can't find any such thing even though the web seems full of mentions of such a beast.
Anyone have any ideas or any suggestion as to where I should post this question?
Martin

FYI:
http://discussions.apple.com/help.jspa#answers
Steve should get the Solved Green Star...
Patrick

MS-6309 motherboard and ATi radeon 9600 Pro

I have a MS-6309 motherboard. I have recently installed an ATi Radeon 9600 Pro 128MB graphics card and am having some problems. I am running Windows 98. I can't get Direct 3D and AGP Texture Acceleration (this is disabled) to work. I want to download the latest drivers for my motherboard but don't know which link to choose on the motherboard drivers page of the MSI web site.
The problems that occur are:
1) The screen freezes up
2) The graphics on the screen go blurry
3) Everything stops and the monitor switches off
I am sure this is a driver issue and not a hardware issue. Please can someone help me!

chances are you need a better psu than you had before actually
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=124
has the drivers

ATI Radeon X800 XT or ATI Radeon 9600 Pro Mac Edition for 30" display

I currently have the ATI Radeon 9600 Pro installed in my G5 2.0 DP and it is running my 30" display, but I am having some isssues when I play DVD's the pictures seems to skip every few seconds like it isn't playing fast enough, or it hesitates. I bought the ATI Radeon X800 XT and wanted to know if that would be a better card before I switch it out.

The X800 is a faster card but DVD playback doesn't put much load on the card, so the X800 probably won't help. If it skipping on more than one DVD, the DVD drive is probably having problems. Cleaning the lens ay help.

Total lockup KM4M-L w/ ATI Radeon 9600 Pro

OK, its been a while since ive had any problems at all but unfortunately I am getting problems with my KM4M-L based PC completely locking up.
I am pretty sure that this is a graphics related issue since it started when I installed an ATI Radeon 9600 Pro 128MB.
I tried removing old nVidia drivers completely, have jusy formatted and re-installed Windows XP Pro with SP2, but the problem is still there. I have tried the card on AGP 2x and 4x, with fastwrite enabled and disabled, and different memory allocations of 64MB and 128MB, but still no joy.
I have also tried the latest two sets of drivers from ATI with no joy, and the latest chipset drivers & BIOS revisions from MSi.
Does anyone know of any compatibility issues between my hardware or something I may have missed in my frustration? Thanks, Huw
Mercury 400W PSU Specs: 3.3V 28A 5V 40A 12V 17A
MSI KM4M-L
AMD Athlon XP 2600+
Crucial 1x512MB PC2700 RAM
ATI Radeon 9600 Pro 128MB
M-Audio Audiophile 24/96
Excelstor 80GB 7200RPM HDD
Maxtor 20GB 5600RPM HDD
LG 52x32x52 CDRW
Unbranded 32x CDROM
S-Talent 128MB Flash Drive
Netgear WG111 USB 802.11g Network Adapter
Thermaltake Xaser Desktop

OK, I have tried a number of things since posting last.
I have been running the PC without the video card, just using the onboard graphics, which didnt seem to help.
I have air dusted, and replaced the GPU heatsink and fan for a large machined one with a more appropriate size of fan but im still getting some problems:
The first is the complete lock-up, which still occurs at seemingly random intervals with no pattern at all.
The second problem is quite frequently on botting the computer, when windows has loaded, the screen display seems to breakdown into random pixels as soon as I start using anything, the effect is hard to describe but its almost as if the screen is being airbrushed, very odd
I should add that I have also removed the Maxtor HDD, since last posting, and also run a series of MemCheckx86 tests which seem to indicate that the RAM is fine.
Any ideas anyone? I am starting to suspect that there may be multiple problems contributing to this annoyance

ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
Many thanks,
Philip

The Nvidia 7800GS is a flashed card, runs a 30" with ease.
BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
There are also flashed 6600GT AGP cards which will work, but harder to find.
Any of the above 3 will run circles around a 9600.

ATI Radeon 9600 Pro and 2560 x 1600

Hi,
I've got a Radeon 9600 pro and just purchased a new 30" display. However, I can't seem to get it running at 2560 x 1600 - does this card support this resolution?

You will need a graphics card with dual-link DVI.
Starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon 9650 XT (Single-link, dual-link DVI)
<http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
ATI Radeon® 9600 Pro PC & MAC Edition 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>

Still have MobileMe icon (not iCloud) on my System Preferences,how can I install iCloud on Macbook pro?

Still have MobileMe icon (not iCloud) on my System Preferences, how can I install iCloud on Macbook pro when directions say to click on iCloud icon in System Pref. ?

Read the system requirements for iCloud. It is not compatible with Snow Leopard which your system profile confirms you have.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

PPC G5 with ATI Radeon 9600 Pro monitors not getting signal

hi there.
I have a PPC G5 with ATI Radeon 9600 Pro graphics card and I cannot get a monitor to work properly. I am trying an old Apple Studio Display (circa 2001) and a Viewsonic VA520.
It seems like the Apple display should work, but all I get is a black screen. I ran it through a DVI to ADC adapter and had it working for a short period of time, but for some unknown reason it went back to the black screen.
The Viewsonic gives a 'NO SIGNAL' screen and not much else.
Both of these monitors have worked on other G5's. I am guessing this is a graphics card issue.
I appreciate any kind or helpful words! Thank you.

I'm having a similar problem with the G5 not recognizing a VGA monitor on either video out. I have no problem using two monitors with the DVI inputs but I need to use a VGA video splitter for a third screen. It worked at the beginning of this week, and now it refuses any VGA out, even without the splitter, just going into directly into the VGA in of one of my working monitors via a DVI-VGA adapter(i've tried different ones). I read another post about trashing "displays" and "windowserver" preference files but i haven't yet tried that..any clues??

Help : Will ATI Radeon 9600 Pro run a 30" Cinema Display ? ? ?

just a simple question as the subject suggests /
i have a 1st generate Power Mac G5 Dual 2GHZ / with Radeon 9600 Pro
graphics card . i would simply like to know if it will plug an play nicely
with a 30 inch monitor - be it the Apple Cinema Display or Dell -
anyone have any definitive answers / my thanks in advance
best,
lex

You need a different graphics board with dual-link DVI to run the 30" at full resolution. The AGP cards Apple sold that have dual-link DVI ports are:
ATI Radeon 9650 XT (one single-link, one dual-link DVI)
NVIDIA GeForce 6800 GT DDL (two dual-link DVI)
NVIDIA GeForce 6800 Ultra DDL (two dual-link DVI)
Apple doesn't sell these as retail items, but might sell them as replacement parts, or you could look for them used. Be sure to get Mac versions.
There are two new graphics boards that will work:
ATI Radeon® X800 XT MAC Edition RoHS 256MB AGP (one ADC, one dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170810>
ATI Radeon® 9600 Pro PC & MAC Edition RoHS 256MB AGP (one single-link, one dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>

ATI Radeon 9600 Pro fuzziness

Hi,
I have a G5 tower with ATI Radeon 9600 Pro running two fujitsu LCDs, both at 1680x1050, 60 hz. Today, they're both incredibly fuzzy - bordering on unusable. They remain this way if I step down to lower res.
This is only on my login. My wife's login = crisp and clear. Likewise the login screen. Have tried resetting the PRAM, no change.
One thing I do notice today is that the very far right edge of the menu bar is bleeding over into the right screen, which I don't recall it used to do.
Also, the display is shifting about on the horizontal axis, like it's trying to find a better line sync or something (to use an old CRT metaphor)
Any help much appreciated, Robbie
Dual 2GHz G5 Mac OS X (10.4.9)
Dual 2GHz G5 Mac OS X (10.4.9)

Hi-
Welcome to Discussions!
Something new in your (user) startup items?
Since it only occurs in your account, you could have some incompatible extension/utility, or be missing one.
Might compare yours to your wifes-
System Preferences/Accounts/Login Items
Might check to see if you have any Universal Access preferences enabled-
System Preferences/Universal Access

How can i install on my MacBook Pro the adobe installer

How can I install adobe installer in my Mac ?

You can download the product or Creative Cloud installer from Adobe.com, and then run the installer.

How can i install ati radeon 9600 pro

Similar Messages

Maybe you are looking for