How can I install bootcamp on Tiger 10.4.5

I knew bootcamp was built into Mac OS-X 10.5 or 10.6, but I'm using 10.4 and loose all the software I was downloaded, including the old bootcamp dmg file.
Any one can tell where I can get the bootcamp for 10.4?

I have run Windows 98 in a version of Parallels ( version 3 i think) on Tiger 10.4.11.
With the Intel Macs, you can run windows in a virtual machine. Folks are cloning their old windows to a Parallels virtual machine.
Parallels:
http://www.parallels.com/en/products/desktop/
& some catalog order places sell Parallels for 9.99 when you buy a mac. You can runs versions of Parallels on Mac OS 10.4.
With VMware Fusion, run the most demanding Mac and Windows applications side-by-side at maximum speeds without rebooting
http://www.vmware.com/products/fusion/
Don't miss the free VirtualBox.
"VirtualBox is a general-purpose full virtualizer for x86 hardware. " Runs Windows on Mac OS.
http://www.virtualbox.org/
Robert

Similar Messages

How can I install Windows 8.1 Enterprise on my Macbook Pro With BootCamp?

How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

Hi Armin.S,
I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/HT1461
Apple - Boot Camp Support
https://www.apple.com/support/bootcamp/
Regards,
- Brenden

The guide to bootcamp assistant states that bootcamp can only be installed on a drive with a single partition. New Macs with Lion preinstalled have two partitions - the second is a recovery partition. How do I install Bootcamp?

Late in August 2011 I took delivery of a new 27" iMac with Lion preinstalled. I need to run Windows as well. Following Apple's written suggestion, I printed off the then current 12 pages of the document "Bootcamp Installation & Setup Guide" which clearly stated that the hard drive you were going to install on had to have on it, before install, a maximum of one partition. Using finder and disk utility I determined that there was only one partition. Unbeknownst to me, there was (is) an additional hidden (from those two pieces of software) partition on the disk. As of machines delivered new with Lion preinstalled, Apple has begun to include a "recovery partition". In that partition there is a copy of the software necessary to reinstall Lion via a download from the Apple App Store. Not knowing the partition was there, I cranked up "Bootcamp Assistant" which nicely offered to repartition my hard drive creating a "Bootcamp Partition" in addition to the existing. I told it how big to make each and hit the do it button, subsequently destroying my operating system. Oh, it very nicely told me, after the damage was done, how many partitions were REALLY on the disk and that I could not install Bootcamp cause there were too many partitions.
Luckily the the Recovery Partition, which at that point I knew existed, was not harmed and after doing some research on another compter, I used it to once again download Lion from the App Store and reinstall. So, I have recovered but am still stuck with the problem: how do I install Bootcamp in this new environment?

First you need to seriously back up your Mac.
A clone is an exact duplicate of your existing Mac HDD. Merely copying and pasting a drive will not make a bootable backup. In case of problems you can boot from an Ext HDD clone and use the utilities to repair, reformat, or clone the Ext HDD back to the internal Mac HDD. While Time machine back ups are easy you can not boot from it. The best thing to have for any kind of problem is a bootable clone backup on an external drive. Some even have two external backup drives in case one fails. There are two good apps for cloning named SuperDuper and Carbon Copy Cloner.
In dealing with the recovery partition a simple approach is to clone the Mac partition to an external disk then re-partition the Mac to a single partition (GUID partition table) . Then clone the external disk clone back to the Mac. You will now have only one Partition and Boot Camp assistant sould not object.
Some have recommended getting rid of the recovery partition while others have advised not to do this. If you have the Lion USB Thumb Drive you do not need a recovery partition so can discard it without concern. There is another way to get rid of the recovery partition if you decide to do it but first be sure to have a backup of your Mac ( I know I sound like a nagging mom but many dead computers have been saved by this simple precaution).
Use Disk Utility.
1) Make the Recovery visible in Disk Utility by using a program like Secrets:http://www.macupdate.com/app/mac/27025/secrets or MacPilot:http://www.koingosw.com/products/macpilot.php (15 day free trial).
2) Highlite the Recovery partition and Control click it and select Mount the partition.
3) With the Recovery partition highlited, erase the partition, you'll get an error message, ignore it.
4) Now highlite the top identity of the hard drive and select the partition tab.
5) Highlite the Recovery partition and press the minus sign.
6) Click and hold on the bottom edge of the partition above and drag it to the bottom, if it doesn't go there automatically, the press apply.

How can I install windows XP in my Macbook using bootcamp?

I`ve just bought my mackbook Pro and I`m student of engineering. I`d like to install windows XP in my macbook to use some especifics softwares! But when I use bootcamp, Mac just gives me the option to install Windows 7? How can I install Windows XP? Thanks at all!

Bootcamp 4 which ships with Lion doesn't support XP or Vista, only 7. Try using Parallels or VMWare instead.

How can I install Tiger 10.4.11 over Panther 10.3.9

How can I install Tiger 10.4.11 over Panther 10.3.9 ? I tried using a 10.4.2 install disc that I was going to update to 10.4.11, but got message that this would not work on this computer.
Thanks
Bob

Upgrade 10.3 to 10.4 Drop-in Install...
2Z691-5341-A
You must already have Mac OS X 10.3.x Panther installed on your Mac to use this 10.4 Tiger upgrade. Your Mac must also meet the system requirements (detailed below) for Mac OS X 10.4 Tiger.
Compatibility
eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD)
http://www.welovemacs.com/m9639za.html

How do I install Bootcamp on Windows 7.

I have just installed Windows 7 on my Mac Mini and now I want to switch back to the Mac OS. When I hold down Alt while booting up to change OS nothing happens.
The other option is to install Bootcamp to work with windows. It's already on my mac as I used it to install Windows 7. But there is no option to switch OS with Bootcamp as I can't find it on Windows 7. I've seen tutorials on how to install it with a disk but the Mac mini has no optical drive.
How do I install Bootcamp on Windows??

At first I was under the impression i had accidentily deleted the MAC OS but thankfully I haven't. I did a system restore on Windows and when it restarted I held Alt and I could select my OS.
But I still don't have the shortcut to bootcamp showing in windows. How do you make a bootable USB for Bootcamp?

How can i install windows games in my macbook pro

I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

How can i install mozilla firefox on my iBook G4

How can i install mozilla firefox on my iBook G4

The mozilla-derived Firefox-based browser known as Tenfourfox does a fair job and is about due for code upgrade near the end of this year from version 17 to version 24. Tenfourfox can run in Tiger 10.4.11 + Leopard 10.5.8.
http://www.tenfourfox.com/
I have & use both Tenfourfox + SeamonkeyPPC versions in my PPC G4 Macs. (My third choice is iCab...)
These both play well together and can be run simultaneosly without odd effects, unlike what can happen if you were to run the original Firefox and then launch Tenfourfox; as those share resources. I use SeaMonkey PPC for my web mail login via google Notifier, and have that set as the default browser through use of Safari's preference settings. Even though my first browser choice is Tenfourfox.
You can choose to 'enable plugins' of stuff that by default is turned off in tenfourfox, for security reasons, such as an older no-longer supported version of adobe's Flash. However, video such as youtube content will often automatically work OK from most sites via Tenfourfox now.
{There's also a seamonkey 'modern version' for intel-based macs w/ later OS X, not at the seamonkeyPPC site...}
Good luck & happy computing!

How can I install windows XP or win 7 32 bit in MacBook Air 2013

Hi,
I want to install windows xp or windows 7 32 bit on new MacBook Air 2013 with bootcamp 4.
Apple says MacBook Air 2013 mid 2013... Comes with bootcamp 5.
And bootcamp 5 support only 64 bit windows....apple says.
I want to install win xp or win7.32 bit with bootcamp4.
Can we downgrade the bootcamp by uninstalling or something...?
Or how can I install 32 bit windows on new MacBook Air 2013.
Thanks I advance.
Please guide.

Bootcamp 4 which ships with Lion doesn't support XP or Vista, only 7. Try using Parallels or VMWare instead.

How do I install Bootcamp on 2nd internal iMac drive?

Have a new iMac with a 1TB internal HD in addition to the SSD startup drive.
Can I, and if so how do I, install Bootcamp on the 1TB internal HD? Will the Bootcamp Assistant point out the 2nd internal drive and proper location during the install process?
I purchased this iMac w/wireless keyboard, mouse, and trackpad...is that going to be a problem during the Windows install?
Thanks,
David

Bootcamp actually gave me an option to install on the 2nd internal iMac drive and it's working like a champ!
Thinking I was relegated to a Bootcamp partition on my SSD startup drive, I went ahead and delved into the Bootcamp install, only to find an option to install on either my SSD startup drive or my 2nd internal iMac drive. I simply chose the 2nd drive and lo, and behold, as I hold the Option button down on startup, both of my operating systems (OS X and Windows) available for selection.
Thanks for all the help, but it looks as though the latest edition of Bootcamp has addressed this issue, I am quite pleased.
David

How can I install Windows 7 on Macbook Pro 17' (2009 model)?

I cannot Install, neither enter on the setup screen.
When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
Pease help ?

Let me get this - because the title misled me as to what you are asking, ie:
I cannot Install, neither enter on the setup screen.
When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
Does the above really tell the story?
The issue isn't "How can I install Windows" but more like "I am trying to get past " an issue with Boot Camp 4.01.
Some people that already had BC 4.x installed had trouble after March's "Patch Tuesday" which was a critical number of security patches and updates. They had to rollback, uninstall an update/driver, before they could move forward.
The trouble with "had to zap pram to get back to Mac OS" is more to do with the health of the partition table and nvram, and you could try using both Windows control panel to set the default OS, and set Startup Disk control panel in Mac OS (click OFF the volume name, then back to the volume, too).
Sometimes there are problems with 3rd party NTFS for OS X that people use as well.
Boot into Lion Recovery - that should be first step if there are problems with Mac, and you don't sound like you tried boot Windows DVD (which I asked above, which can fix errors).

How can I install and run a Windows program on my MacBook Pro/?

How can I install and run a Windows program on my MacBook Pro?

You have several options.
1, Use a Virtual Machine like Vmware, Parallels etc... to Create a Virtual Windows Installation and Run your program in there. A Virtual MAchine will runn in a Window on your Desktop and share your Mac's resources RAM HD space processor. Your MAc desktop will still be available while you run Windows install.
http://www.parallels.com/
2. Install Windows on a partition using Bootcamp. It will run a full installation of Windows you can boot into, and run your programs. The Mac desktop will not available until your reboot the computer and start in OSx instead of Windows.
https://www.apple.com/support/bootcamp/
3. Use Wine / Winebottler to run the Application without the need for a complete Windows installation.
http://winebottler.kronenberg.org/

How can I uninstall Bootcamp and Recover the partition for the Mac HD

How can I uninstall Bootcamp and recover the partition for the IMac HD?

Boot into OSX. Go back into the Bootcamp utility in the Utilities folder and re-run it. It will give you the option to remove the Windows partition and make the OSX partition fill the whole drive again. OSX will NOT be lost in the process. No re-installing necessary. Only takes a few minutes or less to complete.

How can I replace a damaged Tiger (intel) restore DVD

Hi,
How can I replace my damaged Tiger (intel) restore DVD for a Mac Mini. The version of Tiger in the shops is for PPC, the restore DVD that came with the Mac Mini is now covered in scratches and will not work.
Kind Regards,
Dave.
Mac OS X (10.4.10)

Welcome to the forums!
Install DVDs are for Tiger are specific to the model and build of your mac, so getting one at the store won't work anyway.
Contact AppleCare, explain the problem, and they will send you a replacement. You'll need your serial number (look in System Profiler), and you will have to pay a nominal charge for shipping/handling.
Hope this helps...

How can I install Adobe Photoshop Elements Update 9.0.3 after I get a message that Installation has failed and the solution is not in troubleshooting or forums?

My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
Colin Hansen

Try downloading and installing the 9.0.3 updater from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows

How can I install bootcamp on Tiger 10.4.5

Similar Messages

Maybe you are looking for