How can i install C:\WINDOWS\system32\regsvr32 Msx...

how can I install C:\WINDOWS\system32\regsvr32 Msxml3.dll for Nokia N70 on windows XP?

Run command:
regsvr32 msxml3.dll
Msxml3.dll is a Microsoft XML parser dynamic link library. It is
obviously needed by PC Suite, but wasn't registered as installed
by the system. Using the "regsvr32" command on the .dll registers the file.
What's the law of the jungle?

Similar Messages

How can I install new windows on NB200-10z without a CD drive?

Hi,
I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
I would like to do a recovery, but it also doesnt work.
I know there is a shortcut like press the 0 button when the laptop is starting up.
With this shortcut you can start the recovery to reset the software.
But when I press the 0 button it gives me an error.
So I think the recovery drive/partition is lost.
How can I install new windows on this minilaptop without a CD drive?

I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
+Message was edited: link has been removed+

HT5639 i use boot camp to install windows 8.1 but in the middle of the installation it is stop,how can i install the windows again?

i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
why it`s stop?

What is your exact machine and what's the error

Disk failed, got a new one. How can I install the Windows 8 without paying?

So I got this product and after a year and a half disk had errors and had to replace it. Now I'm struggling to install windows 8 again! how can I do it without buying Windows 8?
This question was solved.
View Solution.

In all probability you installed the wrong version of Windows that matches the key that was originally installed on your system. Definitely it was not Pro but probably the standard, Windows 8.1
You may download from here:
http://www.eightforums.com/tutorials/18309-windows-8-windows-8-1-iso-download-create.html
If you cannot install with the proper key you will have to order recovery disks. If you live in the USA/Canada, call HP at this number 1-800-334-5144, and see if you can still get a set of recovery disks. Otherwise the WorldWide site:
http://www8.hp.com/us/en/contact-hp/ww_office_locs.html
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

How can i install a windows version 8 on a 3 year old iMac 27 (only windows and nothing else not via bootcamp = result shut be a clean iMac with windows - no

When i now had recieve a brand new 27" imac, i had a 3 year old model 27" imac which my daugter want to have BUT i should be as a clean Windows thing -
so how to change the computer to a clean windows 8 computer with no apple programs in and no Maverick or other lovely programs?
I had seen on the net that a lot of peoble had windows with bootcamp - i am not a computer tecnician and when i try - i end op with a machine with could nothing - no mac programs - no office pack - no adobe programs - so i had to start op again with a new harddisk.
Some of the problem is that i dont understand the thing which bin told when you go to bootcamp for a user of mac's since the model was the "classic" and we make newspapers on them - so i want and easy way to have and mac computer for my self (the new one) and let my daugter have a beutiful imac with windows on.
dont begin talking about parrelles i had try that, results it had a windows 7 which cant be updated, apple dont support that and microsoft doesnt so - help me
regards
Chevron B50

If you don't want Boot Camp and you don't want a virtual machine, go buy a Windows computer.
Both Boot Camped Windows and Windows running in a virtual machine work well. Your issues are because of your lack of knowledge or understanding, not because Boot Camp and virtual machines are poor products. Universities, large and small businesses, home users, etc. use virtual machines to run their operating systems.
Your statements about Boot Camp and Parallels are not the experience of thousands of users.
Either find someone who is knowledgeable about running Windows on Apple computers to help you or buy a Windows computer. Believe me, if you find a way to install only Windows on your Apple computer without using Boot Camp or a virtual machine you will have more problems than what you have already experienced.

How can I install a Windows 7 Upgrade in Bootcamp?, How can I install a Windows 7 Upgrade in Bootcamp?

Hi!
I'm running OSX 10.9.1 and would like to install Windows 7 on Bootcamp.
Unfotunately, I have a Windows 7 upgrade disk and an XP full version disk.
If I install Win7, Windows won't accept the license because it wasn't installed as an upgrade. Bootcamp won't let me install XP.
Any ideas or workarounds?

I don't know of a workaround for your situation, I'm afraid.

How can I install on Windows remotely via command line?

Hello Folks.
I want to install an application on Windows remotely and via command line, For example, I need a tool like Psexec or WMIC but I don't like the user understand it. Any idea?

Hi,
Please also refer to following FAQ article and check if those four general ways will meet your requirement.
[Forum FAQ] How to deploy applications remotely
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How can I install Windows 8.1 Enterprise on my Macbook Pro With BootCamp?

How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

Hi Armin.S,
I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/HT1461
Apple - Boot Camp Support
https://www.apple.com/support/bootcamp/
Regards,
- Brenden

How can i install windows games in my macbook pro

I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

How can I install photoshop elements on a 64 bit windows system?

How can I install photoshop elements on a 64 bit windows system?

You just use the appropriate install disk/ download. See this:
Install Premiere Elements, Photoshop Elements
Or are you asking about some specific procedures?
Mylenium

How can i install windows game on my mac actually i download a cricket game 2009 how i can inastall in mac

how can i install windows game on my mac. actually i download a cricket game 2009 how i can inastal in mac

It will never run in OS X. You need to install Windows on your machine.

How can I change the window size of iTunes? Used to be easy before installing Mavericks.

How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.

If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab

How can I install a 2605dn printer to ny network using a windows 7 based computer?

I have been running a 2605dn colour laser printer on my home network for some time now without trouble. The XP computer that I used to install the printer has died and I now have a windows 7 based machine.
The printer needs to be re-installed and the installation disk is for windows XP and 2000.
How can I install this printer without an XP based pc?

Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.

unlocked by myself
thanks

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How can i install C:\WINDOWS\system32\regsvr32 Msx...

Similar Messages

Maybe you are looking for