How can I install Microsoft BT stack on Satellite A100 ?

How to install Microsoft Stack for bluetooth?
I've tried the way it is described in readme file:
Uninstall Toshiba Stack, restart, Install Bluetooth Monitor 2 (i did copy necessary files to C:\Toshiba\MS_Bluetooth), restart.
After this windows wants to install Toshiba RFBUS for which i have no drivers.
There is no way to enter windows bluetooth settings [no such control in controls panel].
It's not working!
Message was edited by: krystian_s

Sorry for asking you again. Is it an interal BT module or do you use an external USB BT adapter ?
So I assume you are using an internal BT adapter. So your discription is correct. You can use the switch tool after the removal of the Toshiba stack to enable the ms stack again. I see no reason why it should not work.
If you just want to use the nokia data suite then you should have a look into the Howto section of the BT webpage.
Which mobile phone are you using ?
So if you have installed the Toshiba Bt-stack and want to switch to the ms stack then you can also try
the following:
- Open the device manager (Run -> Devmgmt.msc)
- Open the "Universal Serial Bus controllers" section
- Select the BT device "Bluetooth USB Controller-3 from TOSHIBA" or similar.
("Properties -> Details -> Device Instance Id" of it. It should display
"USB\VID_0930...". )
- Right mouse click on it -> Update Driver... -> No, not this time -> Next ->
Install from a list or specific location -> Don't search. I will choose
the driver to install. -> Next -> Select "TOSHIBA Integrated Bluetooth 2" or similar
-> Next -> Finish
- Now open the "Universal Serial Bus controllers" section again
- Select the "TOSHIBA Integrated Bluetooth 2" (or similar).
- Right mouse click on it -> Update Driver... -> No, not this time -> Next ->
Install from a list or specific location -> Don't search. I will choose
the driver to install. -> Next -> Select "TOSHIBA Integrated Bluetooth 2" or similar
-> Next -> Finish
- Now the "Universal Serial Bus controllers" section shows no BT device anymore
- A new "Bluetooth Radios" section is available now with 2 devices "Microsoft Bluetooth Enumerator"
and "TOSHIBA Integrated Bluetooth 2" or similar.
- Start MS-stack (Start-> Run -> bthprops.cpl).

Similar Messages

How can I install Microsoft bluetooth stack on Lenovo 3000 N200?

Hi there,
so far I have failed to get the Microsoft bluetooth driver working on my Lenovo 3000 N200 with Windows XP in order to easily sync my BlackBerry via bluetooth. The RIM software requires the Microsoft driver and does not work with the Lenovo driver.
I have managed to deinstall the Lenovo driver. However, I do not know how to install the Microsoft driver.
Could someone please help me?
Have a nice weekend, everyone!

When I used BT for the first time (pre XP SP2 era) I just installed the MS BT package that you can download. Later SP2 came out and it was included as part of it. You just plug a BT stick in and its installed...
One out of two: or your XP is old or the bluetooth brand is non-standard... In the past many BT, network, etc. hardware came with its of drivers and application, maybe you can find out your exact model and search for the application by any manufacturer that uses the same chip.... Should be Lenovo of course, but....

How can i install Microsoft Silverlight. Is there an app for?

How can I install Microsoft Silverlight. Is there an app for this?
Ipad does not recognise programms .dmg

You can't. Silverlight applications won't work on iOS devices.
.dmg files are typically Mac OS X disk image files, you can't run them on an iPad either.
tt2

How can I install microsoft office

how can I install microsoft office or any other product that requires dos

You are showing 10.6.7. You should be able to run any Office PPC/Mac Compatible version (e.g. Office 2004) with Rosetta in Snow Leopard.
As noted, you can't run a Windows version except on a Windows partition.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html

How can i install microsoft office on my Mac mini from a CD-rom ?

I recently bought a Mac mini and a microsoft Office on a CD-Rom.
But i can't find anywhere i can insert the Cd-Rom in order to install the software... How can i do please ?

Much easier than the above (from Ms website):
Option 1: Convert your Office for Mac 2011 trial. To convert a trial version, you must have a valid product key. The product key will convert your trial into a fully licensed version of Office for Mac.
Locate the 25-character product key in your product package or confirmation email.
Open any Office for Mac application, like Word, PowerPoint, or Excel.
On the first screen of the Microsoft Office Setup Assistant, click Enter your Product Key.
Enter your product key and complete the installation instructions.
Option 2: If you have not previously installed the trial version, you can download Office for Mac from the Office for Mac website. To download, install, and activate the software you must have a valid Office 2011 product key.
Locate your 25-character product key found in your product package or confirmation email.
Go to www.officeformac.com/download
Click Get Started to start the download process.
When prompted, enter your 25-character product key and select your product language.
When prompted, sign in with your Windows Live ID or sign up and create a new Windows Live ID account.
After you enter your Windows Live ID, you will see a link to download the software. (You will also receive a confirmation email with a link to your My Account page if you prefer to wait and download your software at a later time.)
Click Download Now to start the download.
Save the file to your desktop. Do not change the file name.
When the download is complete, double-click the .dmg file icon on your desktop. This opens the Installer application in Mac OS X.
Follow the instructions in the installer screens to complete your installation.

How can I install Microsoft Money 2001 on to my Macbook Air?

I have just got my MacBook Air and am very happy with it, but I'm currently trying to install Microsoft Money 2001 on here, and I have no clue how to do it... It is a CD which I have installed on my old computer, however, I insert the CD into the disk slot in the USB disk thing, and it comes up with the disk on my desktop, but I have no idea what to do from there. Please help, thank you.

Wow, I see some red flags:
Microsoft Money - Are you sure this runs on a Mac running an OS X operating system?
2001 - Are you sure you want to run twelve year old software? Are you sure it can run on a current processor?
There are other products out there that may do what you need at least as well ...
Anyway, putting all that aside, and assuming you know that Microsoft Money 2001 will run on your Mac, here's the answer to your question:
Control-click on that "disk on my desktop". Then click "Open". Hopefully you will either see something labelled "Installer", or some arrow showing the Microsoft Money icon leading to an Applications Folder. If you see the installer, double click it. If you see the arrow, drag the icon as indicated. A third possibility is you will see a ".dmg" file. If so, double click it.
If you see none of the above, that would reconfirm this software is not designed for an Apple product!
Anyway, I would be very reluctant to try to install it because of the red flags.

How Can I install Microsoft Office to MBAir?

I just bought new MBAir 11.6'' . And I don't know how to install Microsoft Office. I am just a new user.

The most common method is to purchase download from Microsoft. If you have already purchased office 2011 then download the trial and upgrade it with your key.
http://www.microsoft.com/mac/downloads

Can I install 4GB RAM in my Satellite A100-033?

I have a Satellite A100-033 (PSAANE-03J02GEN). The manual says that it will support only 2GB RAM maximum. Does anyone know if it will in fact support 4GB? I have installed 2x1GB instead of the supplied 2x512MB, and am tempted to install 2x1GB? Will this work, or is there some restriction in the motherboard or BIOS which means that the larger RAM won't be recognised? Can anyone help?

Thanks. I agree that the fact that my laptop's specification says "2GB maximum RAM" is a bad sign, but I have found in the past that specifications aren't always completely accurate, which is why I enquired.
My processor is a 1.6GHz Intel T2060. A check on my laptop (by the program "Belarc Advisor") says that my motherboard is an Intel Capell Valley (NAPA) CRB, and that my BIOS is a Phoenix 6.00 07/12/2007. Is there any way whereby I can find out if this combination will in fact recognise 4GB of RAM?
I know that 4GB only yields a little over 3GB usable RAM, but I would still like to increase the amount of RAM which I have, if this is possible, but obviously I don't want to spend money on 2BG chips which then don't work in my laptop.
Any suggestions gratefully received!

How can I install Microsoft Remote Desktop ActiveX Control

I am trying to connect to my pc at work from home. This is the message I get.
This portion of the Remote Web Workplace requires the Microsoft Remote Desktop ActiveX Control. Your browser's security settings may be preventing you from downloading ActiveX controls. Adjust these settings, and try to connect again.
I have looked through all the add-ons available and can't find it to add on. Nor can I find a relevant security setting to change.
I am running firefox 28.0 on Windows 7 Professional.

ActiveX controls are specific to Internet Explorer.
* https://en.wikipedia.org/wiki/ActiveX
You can try opening Internet Explorer inside a Firefox tab with the following add-on.
* https://addons.mozilla.org/firefox/addon/ie-tab-2-ff-36/

How can I install windows XP on my Satellite A300-129

Hello,
Since a few days I have bought a Toshiba Satellite A300-129. I'm very satisfied with the laptop, though I don't like to work with Vista so i would prefer to reformate the laptop and install Windows XP Professional(32 or 64 bits, dunno yet).
However I don't know if i have to do anything special for it, because this is my first notebook I've got and I only once had a laptop with drivers on a CD. Now i'm switching operating system i think i need some driver disc's for my webcam and stuff like that.
I hope some1 can help me :)
Thanks alot
BTW I'm dutch, so sorry for my English.

> And i've got a legit license of XP Pro, though i dont understand what u mean with the sata driver things. Do u mean i need to ADD the drivers on the current Disc with windows XP?
The point is that your Windows XP CD does not contain the SATA drivers which are necessary to recognize the HDD during the XP setup procedure.
So you will have to include the SATA driver pressing the F6 button while the XP setup is loading. For this procedure an external FDD drive is necessary.
If you dont have a external USB FDD drive then you could create an Win XP CD and could include the SATA drivers using the free software called nLite.
One note; Use the forums search function for searching on other threads about the nLite and how to create such CD. I remember there are many threads in the forum about this theme.
Cheers

Can I install Microsoft Word on my iPad, and if so how? I have a disk with Microsoft Office and an extra license to use it, but IPad's do not have disk ports.

How do I install Microsoft Office for Mac on my iPad?

Momojai wrote:
You cannot, as Microsoft Word is made for computers, not tablets. You have two main choices if you want to create documents:
1. Buy Pages in the App Store, does the same job but is made by Apple and not as good.
2. If you have Office 365, there's an Office app for iPhone, but can also run on iPad.
There are far more choices than those two.

How can I install or use Microsoft Office on my iPad 4?

How can I install or use Microsoft Office on my iPad 4?

You cannot. Microsoft has not made a version of Office for iOS. There are however a number of apps that are compatible with Office documents. Apple makes iOS versions of their own iWork apps (Pages, Keynote, Numbers) that are available free if you purchase a new iOS device and that can be purchased separately for older devices. There are also 3rd party combined suites that cost less than the separate Apple apps. Ones often recommended include Documents 2 Go, Quickoffice and Office2 HD.
If you can accept needing a network connection whenever you want to use the apps and have an Office 365 subscription, Microsoft has just released their Office Mobile app, though it has significant limitations. Or a server-based solution such as CloudOn might be an option for you.
Regards.

How can I install Windows 8.1 Enterprise on my Macbook Pro With BootCamp?

How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

Hi Armin.S,
I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/HT1461
Apple - Boot Camp Support
https://www.apple.com/support/bootcamp/
Regards,
- Brenden

How can I open Microsoft Word files on my iMac?

How can I open Microsoft Word files on my iMac?

You can even use the Pages app that is installed on your computer. Finally you can buy a license of Office for Mac and have Word, Excel, PowerPoint and if you want Outlook too.

How can I use Microsoft Access on my Mac?

How can I use Microsoft Access on my Mac Pro?

Welcome to Apple Support Communities
Microsoft Access isn't available for OS X, so you can't use it. If you need it, you have to install Windows on a virtual machine.
On a virtual machine, you can install the Windows version you most like and the Access version you need, so you won't have any problem using it. You just need a full Windows version with its DVD or ISO image and product key, and an application like Parallels, VMware Fusion or VirtualBox to create the virtual machine. If you want to save money, System Builder versions are cheaper and you can find them at Amazon or NewEgg.
As you have a Mac Pro, I suppose you won't have any problem using a 64-bit version, but it's important you have enough memory. Open  > About this Mac, and check how much memory you have. I recommend 4 or 8 GB of memory at least.
After installing Windows on the virtual machine, you will be able to install Access there.
There are applications for OS X that allow you to run Windows applications without having to install Windows. Those apps often fail, so I don't recommend you to use them

How can I install Microsoft BT stack on Satellite A100 ?

Similar Messages

Maybe you are looking for