How can I install my pantech um290 on a new toshiba laptop?

Bought a new toshiba laptop today, installed vz access for the pantech 290 and cannot connect to the internet. I contacted tech support, and they attempted to help me, but there really was no help. I am running windows 7 on the newbie. I installed, detected the device, and kept getting error message wmc100. Tech support advised me to uninstall it, shut it down, open it back up, install it, shut it down, open it back up and attempt to log on. Still got the same error message.
<sigh> if only I could afford a new mac laptop. It really is my preference........

The first thing I would do is take evsotech suggestion to install the updated version of the software because the cd has a habit of having out dated software on the cd, go to http://vzam.net/ and download the most recent version of the software..
Now as for having driver issues, basically to make sure you have all your drivers installed correctly go to your desktop and right click on the
1."Computer" icon and select
2."Properties" and then select
3. Device Manager located on the left boarder....
4. Once the screen comes up that shows a list with all the hardware on your PC (Check for any yellow triangle or red exclamation point) because this will indicate a missing driver..
After checking this please report back...

Similar Messages

How can I install Photoshop Elements 11 on a new computer with Windows 8?

How can I install Photoshop Elements 11 on my new computer with Windows 8?

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

I bought a student version of CS 5 a few years ago, and just got a new computer (a MacBook Air). The computer doesn't have a CD drive, so how can I install my CS 5 onto my new computer?

I bought a student version of CS 5 a few years ago, and just got a new computer (a MacBook Air). The computer doesn't have a CD drive, so how can I install my CS 5 onto my new computer?

Download CS5 products
Mylenium

Hi all, i want to know that how can i install mac os on my intel based Acer laptop?

hello all,
i have a acer laptop of intel processor,
now i want to install Mac Os on that acer laptop,
so tell me ,how can it be possible.
regards
zahid

But you can install any version of Windows or Linux legally on an Apple notebook. That has to do with license agreements. You can read all the license agreements for Apple's operating systems here:
http://www.apple.com/legal/
This tip explains how:
https://discussions.apple.com/docs/DOC-2741
It may be time to sell your Acer, and get an Apple instead.

How can I install and activate cs3 Master Collection. My laptop was stolen so obviously I could not uninstall and deactivate, and now I want to install it on my new computer.

How can cs3 master collection be reactivated and installed in my situation? My laptop was stolen recently so obviously my copy of cs3 was not uninstalled and deactivated, and now I'm unable to install it on my new computer.

if you need an activation count reset, contact adobe support, https://helpx.adobe.com/contact.html
you can download your installation files if you don't have an installation disk and use your serial number to activate,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT200165 How can I install my Aperture program to my new macbook?

I would like to install my Aperture program to my new macbook. Does anyone know how this can be done? Apple says that it is legal to do so, but their instructions are full of doublespeak and jargon. Can anyone please simplify the answer?

If you downloaded Aperture 3 from the Apple Store and not the AppStore, then you cannot download it from the AppStore to your other mac. You need the original installer disk image you downloaded. If you did not keep that, download the Trial installer - you can unlock it with your registration key.
A copy of the Trial Installer is here:
Aperture 3.1 Trial.
Download the Aperture 3.1 Trial.
Open the Aperture Trial disc image.
Double-click the "Aperture Trial.mpkg" file.
Follow the onscreen instructions to install Aperture.
After the installation completes, choose Software Update from the Apple () menu.
Install the Aperture 3.4 update from the list of available updates.
Note: If you are using OS X Mountain Lion v10.8.2 or later, you may receive an alert stating that Aperture is from an unidentified developer. This can occur when you try to install Aperture from DVD or the trial download. See OS X Mountain Lion: The app is from an unidentified developer for details on how to successfully install Aperture in this situation.
Regards
Léonie

How can I install my CS2 upgrade to my new macbook pro?

Help! I have a new Macbook pro and an old upgrade of CS2 photoshop (upgraded from Photoshop 6). I bought these two for a PC and was told in the Mac shop that I could run them on my fancy new machine..........apparently not, it won't install classic photoshop 6 as presumably it's too old. I also have CS2 Indesign but can't find the install button to press for that either......Am I screwed? I can't afford new programmes.

CS2 is the oldest version that can be upgraded to CS5. You may want to do that now before you lose the opportunity when CS6 comes out. You can upgrade and crossgrade to CS5 for Mac.
Another thought...
I run CS2 for Windows on Linux through Wine. It works fine. You could probably install Wine on Mac and do the same.
The salespeople might have been referring to running your Windows software on Mac with a virtual machine... with the help of such apps as VMWare Fusion or Parallels. These let you run Windows on top of Mac OS X without rebooting into a Windows partition. See the marketing line: "It Runs Windows Too".

How can i install my photoshop CS4 to my new laptop if i cant find the disks?

I cant find my disks for installing photoshop cs4 to my new laptop. Is there any way I can get a download with my serial #? Or is there any other way to do it?

http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

How can I install my J2EE application on a new WLS domain/server?

Hello All,
I am trying to create an installer for our J2EE application using WLS.
Our requirements:
a. Create a fresh domain/server
b. Create/configure JDBC connection pool/datasources
c. Setup startup classes d. Deploy our J2EE application
Here are the steps:
a. Create a new directory (say myapp)
b. Copy files config.xml, DefaultAuthenticatorInit.ldift and SerializedSystemIni.dat
from an already configured WLS (I have one that has everything including JDBC
datasources/startup classes, etc)
c. Create a directory myserver/upload/myapp
d. Put myapp.ear e. Start the server
Is this the right approach or is any other better way of installing a J2EE app?
Any help in this would be highly appreciated.
Thanks and Best Regards
MS

Check out weblogic 8.1 and the ant tasks wlconfig and wlserver to do this
all from ant.
http://e-docs.bea.com/wls/docs81/admin_ref/ant_tasks.html
Also you can do
java weblogic.Server in any new directory and it will create a new config.
You can pass a command line switch,
mkdir -p /temp/mynewdomain
cd /temp/mynewdomain
java -Dweblogic.management.GenerateDefaultConfig=true -Dweblogic.management.
password=foobar1234 -Dweblogic.management.username=foobar1234
weblogic.Server
That will start a new server with a brand new defaulted config. You then in
7.0 have to run java weblogic.Admin command to create and set mbean
attributes, this means from shell having to fire up VM over and over, from
ANT you wont have this problem if you fork, but I think weblogic.Admin has a
nasy system.exit in it in 7.0 ( Sorry).
Things are better in 8.1 and in our next release we are in planning stages
for adding an installation step to deployment and allowing an applicaiton to
express its dependencies. If you have thoughts on this, shoot me an email
at [email protected]
Cheers
mbg
"MS" <[email protected]> wrote in message news:3e77612e$[email protected]..
>
Hello All,
I am trying to create an installer for our J2EE application using WLS.
Our requirements:
a. Create a fresh domain/server
b. Create/configure JDBC connection pool/datasources
c. Setup startup classes d. Deploy our J2EE application
Here are the steps:
a. Create a new directory (say myapp)
b. Copy files config.xml, DefaultAuthenticatorInit.ldift andSerializedSystemIni.dat
from an already configured WLS (I have one that has everything includingJDBC
datasources/startup classes, etc)
c. Create a directory myserver/upload/myapp
d. Put myapp.ear e. Start the server
Is this the right approach or is any other better way of installing a J2EEapp?
>
>
Any help in this would be highly appreciated.
Thanks and Best Regards
MS

How can i install my itunes library on a new computer

hi I have just bought a new computer, a vizio 64 bit and would like to move my itunes library to this computer from my old one! anyone that can advise the best thing to do would be most appreciated.
Thanks,
Mike

See also this migrate iTunes library post.
tt2

How can i install lion for free in my new macbook pro?

because i read that i can get it for free if i bought it after the june 6th

Go here > Apple - OS X Lion and Lion Server - Up to Date Program
Then click "Redeem from the Apple Online Store"
If you have problems there, click here >
OS X Lion Hardware Up-to-Date Program - Step 1

HT5587 How can I install assistive touch on my ipod from my laptop?

I have an ipod touch and recently tried to update the software on it. Well it did not work, giving me nothing but an error code 1604. I took it to the nearest apple store and the kind lady put assistive touch on it due to the faulty home button on it. The update went through perfectly, but now another update was avalable so I decided to go through with it. After waiting almost an hour itunes gave me the same error code, 1604, I do not want to have to take it back to the apple store because the closest one is two hours away. Please help me to fix this problem without getting a new home button right now.. Please and thank you to anyone who can make a sugestion

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Use this program to get the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode

How can I install Lion (10.7.5) on new iMacs 13,1

I have software and printers that will not work with Mountain Lion. Have partitioned and installed Lion on new partition using an older Mac as a slave and booting the new iMac as target disk. The Lion software installed, but now when booting Lion, partition just hangs with ghostbuster sign. Same with Lions recovery partition.
Why Apple any work arounds? Have not yet tried external drive with Lion installed. Any ideas appreciated.

New models that came with Mountain Lion pre-installed cannot run Lion. There is no known backward compatibility.
I suppose you could try running Lion in emulation using VM software like Parallels or VM Fusion.

How can i install my CS5 licence on my new laptop? (my former laptop is dead and i no longer have it)

Hi everyone,
So my problem is that i use to have CS5 on my former Macbook Pro, but the graphic chip was out of order so i exchange for a new Macbook pro thanks to the warranty i had.
I just want to know how to reinstall CS5 on the new laptop, knowing that i didn't desactivate the licence on the former laptop cause i wasn't aware of that.
Thanks for your help!
Dan

COntact support if you need to reset activations.
Download CS5 products
Mylenium

How can I turn off my touchpad on my new HP laptop computer

Everytime I try to type something, I somehow hit the tocuhpad and it does crazy things to my screen. I want to turn it off easily. Help

Wonder_Woman wrote: "* * *.Go to your control panel, click on Hardware and Sound. Once there, under Device and Printers, click on Mouse. A small box (Mouse Properties) will open up. Click on the "ClickPad Settings Tab". Once there you will click on "ClickPad Disable". A small box will open up letting you know that you are about to disable the only active Synaptics pointing device, just click OK. You will then want to click apply, then OK. Voila! That should take care of it. If you ever need to enable it just follow the above steps and enable the clickpad. For some reason HP has called the Touchpad, "ClickPad." " Thanks but sorry that doesn't work for me, Unless I am not seeing something. This is what I get (Below)when I go to Control Panel>Mouse. When I click Setpoint Settings on the upper right it just goes to settings for my Logitech K810 blutooth keyboard, which I am using along with a mouse because I got so tired of losing my typing when typing on the computer's keyboard. Oh well, it's not that important, I was just going to a seminar tomorrow and I wanted to avoid taking the mouse and just use the touchpad. The Logitech keyboard, though, is a great solution. Maybe I have to uninstall the USB keyboard to get the touchpad to work? Don't want to do that.

How can I install my pantech um290 on a new toshiba laptop?

Similar Messages

Maybe you are looking for