How can I install my twain Scanner into Elements 12

How can I install my twain Scanner into Elements 12? I tried the solution showed on Adobe Web (Copy the folder ImportModules from Optional Plug-ins to folder Plug-ins) and did not get results. Is there any other procedure to do? My computer is MAC. Thanks!!!

Hi Barbara.
1) I restarted the computer
2) The drivers are the latest
3) Samsung Multifuncional CLX-3185FW
4) OS X 10.9.4
I have Elements 8 Installed and recognize the scanner on the "import menu".
Any idea?
Thanks for the help.

Similar Messages

How can I install Windows 7 Pro intoa pre-installed Windows 8.1 Envy 23?

Hello...I HATE 8.1...but I saw your marvelous driver list for a laptop, and was wondering if it is similar for a HP Desktop when removing windows 8.1. I've already asked HP for help, but they, alas, are not 'able' to tell me I can even load Windows 7 on the Envy 23. Very nice people, but very limited in information.
I have managed to locate 2 brand new copies of Windows 7 Pro software, plus have one on hand...obviously, until Windows understands that the world does not like phone apps on a computer, we will be needing backup copies!!!
My brand new mess is a HP Envy 23 that I just purchased last Sunday, and detest thoroughly.
I have gotten the backup USB, just in case, but other than wiping the disk (if I can), and changing the boot order (If I will be allowed), and of course, eliminating any extra platforms I might find If that can be done)...what will I need to save from the 8.1 install to make the bits andpieces, likes sound, and color, and whatever work?
And what on earth is UEFI?
Thanks in advance...I know this forum is a labor of love.
Six days in to a 30 day return...Help!
This question was solved.
View Solution.

Knowing the full model of the computer would help, HP Envy 23-xxxxxx
Trying to downgrade your system to would probably void your warranty and provide a challenge trying to find drivers that would work in Windows 7, a real headache.
Should you wish to go that route you would have to disable Secure boot and enable Legacy in order to change the boot order.
It may be easier to keep what you have and make Windows 8 look and feel like Windows 7
http://www.eightforums.com/tutorials/50124-windows-8-1-make-look-feel-like-windows-7-a.html
or this:
http://www.makeuseof.com/tag/make-windows-8-8-1-look-like-windows-7-xp/
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

How can i install 3rd party software into my Mac with OS X Mountain Lion

Dear Experts,
I wish to install a software downloaded from a broadband service website (Yes, 4G broadband from Malaysia) for my 4G dongle to be able to work with OS X (10.8.1). But the system stopped me from installing it, as it said 'the installation file is not downloaded from App store and my security preference has stopped it'?!
I have my 4G broadband with me but can not be used :-(
**It works with my Macbook Air (OS X 10.6.8)

Right-click it and press Open to install that application

How can I install my CD of Photoshop Element on my new computer??

A Window opens, I click next, I accept the terms of use, I choose Installation and then Photoshop Element in the list, clik next.... and then nothing!
No asking for my serial number, no nothing!
Do I do something wrong? What do I have to do to make it work?
THANKS!!!

Hi,
It's an old version. Bought in 2001. It does not say which version it is... maybe the first? And there was no pop up messages.
Anyway, Thanks for your answer, but finally, I closed some other applications that were open and then the installation started. It was only that!
I found that by accident
Have a nice day!

How can I install all my music and movies that I bought into my computer?

How can I install all the musics and movies that I bought from iTunes into my computer?

iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store

How can I install presets into Lightroom 4.4 64 bits?

How can I install presets into lightroom 4.4 64 bits?

Hard to know where the ball got dropped without details.
I suggest creating a new "test" preset in Lightroom, then make sure you can find it in OS (Finder/Explorer).
Wherever you found it - that's the folder your other presets should be in. If they are already in that folder, then the preset files are not copacetic somehow (e.g. not compatible type).
they should end with .lrtemplate
~R.

How can I install WIFI into my nightblade B85

How can I install WIFI into my nightblade B85

Or buy a USB dongle like this one.
http://www.scan.co.uk/products/netgear-ac600-wifi-usb-mini-adapter
If you look through the web or shops, you can find cheaper ones. Just an example

How can I install PXI-6704 into PXI1031?

I need to install the PXI-6704, (it has 16 extra AO points) to PXI 1031, in one of the free slots.
1.What are the precautions to be taken?
2. Is it just removing the screws and just inserting the card?
I also bought the SCB 68 terminal board and NI-SCB-68 Shielded desktop connector block.
1. How can I connect the terminal block into the Shielded desktop connector block? What are the precautions?
2. SCB-68 pin diagram show only 68pins with 2 AO points than how can I use it for 16more AO points what will be the pin connection?

Hello,
Inserting the PXI card is as simple as removing the slot blocker on the front of the chassis, inserting the card and tightening up two screws. Don't force the card in, there are rails and it should slide smoothly until the card is nearly fully in and then you will feel some resistance as the card slides home. Dont insert the card with the PXI chassis powered on and don't force the card. Sometimes the cards can be a little stiff when inserted so don't be afraid.
I am confused by your comment on the SCB-68 terminal board and SCB-68 shielded connector block. The SCB stands for 'Shielded Connector Block'. You cannot connect the terminal block into the Shielded desktop connector block as they are one and the same thing.
The SCB-68 diagram will not tell you where to hook up your wires. You need to study the pinout for the 6704 card. It will tell you which pin on the SCB-68 you need to use for the AO's.
You have this already installed on your computer, goto Start>>Program Files>>National Instruments>>NI-DAQ>>NI-DaqMX Help. This Help file contains a section called 'NI-DAQmx Device Terminals>>DAQ Devices and then lots of cards underneath. Scroll down to the NI 6704 and you will see which pins on the SCB-68 route to which channels on the PXI board.
The SCB-68 works with a huge number of different cards and as such needs to be non-specific in terms of which pin goes where- so the pinout for the connector block changes depending on which card is connected
I hope this clafafies things a little,
Regards,
Dave.
Senior Software Engineer
www.Adansor.com

How can I install Chinese Language into my 8310?

I brought a Blackeberry 8310 yesterday, but it merely contains English & Spanish. If I want to install a Chinese language, Where can I download it and how can I install it?

Welcme to the Frums!
Do you sync to your computer and desktop manager? Here is a link to another person with a similar question to yours.
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=8990&query.id=153291#...
Nurse-Berry
Follow NurseBerry08 on Twitter

How can I install Win XP on Satellite U300-150 PSU30e

How can i install win xp on U300-150 / Model : PSU30e
I try to boot from CD Win XP SP2 but cannot not detect any HDD.
How can i do it ?
There is no option on bios for SATA support or IDE
please help me

Hey buddy
You will not find any SATA or IDE settings in the BIOS. The problem is that you have not installed the SATA driver which is necessary to install the XP on this notebook.
The key is Intel Matrix Storage Manger!
The Storage Manager has to be included into the Windows XP OS during the setup procedure using the button F6.
At the other hand you could include the Storage Manger using the free application called nLite.
Search a little bit in this forum. There are enough threads and postings regarding this theme.
Ciao

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

How can I install Adobe Acrobat without installing the browser extensions?

Hello All,
I am a computer Technician at a high school and we have very strict browser requirements for different services. We need to use Adobe Acrobat to convert PDF's, and other tasks, and we need to use Chrome to open Adobe Reader files. The issue is that I want my 3 browsers (Chrome, IE, Firefox) to open PDF files using Adobe Reader XI. All my plugin settings are correct to use Adobe Reader to open PDF's, but it either downloads a PDF to the computer, or opens up in the browsers default reader (Chrome does this), or opens up to a blank page with a blank error message. I went into the programs Internet settings for Adobe Reader and Adobe Acrobat and it's telling me the browser opens them up using Adobe Acrobat (With no option to change the setting). The problem is only solved when I uninstall Adobe Acrobat.Then I am able to open PDF's in Adobe Reader just like I want (but this gets rids of Acrobat). This leads me to believe that when I install Adobe Acrobat, there is a registry key or something that is telling the computer to open PDF's in browsers using Acrobat. My initial question is this: How can I install adobe Acrobat without linking it to the browser. I JUST want Adobe Acrobat as a program installed on the computer.
Additional Info:
- I build a computer image and use that image on several computers. This issue persists with all of the computers I installed the image on.
- I am using Adobe Reader 11 (Now DC, but I am willing to use either) and Adobe Acrobat Pro CS3 (I think it's version 9?)
Thanks for the help.
- Charlie

No answer yet. Paging Acrobat support.... Where are you?

How can I boot my PXI controller into real-time without a floppy disk?

My PXI controller is in a lab which has intense magnetic fields that could corrupt the floppy disk used to boot the PXI controller into the LabVIEW Real-Time (RT) Operating System. How can I boot the PXI controller into real-time directly from the hard drive?

If you are using LabVIEW 5.1.2 Real-Time (RT), launch Remote System Explorer and select Disks >> Create Format Hard Drive Disk. If you have LabVIEW 6 RT, launch the Measurement and Automation Explorer (MAX) and select Tools >> RT PXI Disk Utilities >> Create Format Hard Drive Disk (LabVIEW RT 6 has not be released yet). Once you have created the disk, boot the PXI controller with the Format Hard Drive Disk, and this will format the PXI's hard drive and install the real-time OS boot loader. Now you can reboot the PXI without a floppy disk and configure the PXI using Remote System Explorer or MAX. Be aware that this will remove all information from the hard drive, including other operating systems.

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How can I install my twain Scanner into Elements 12

Similar Messages

Maybe you are looking for