How can I install PXI-6704 into PXI1031?

I need to install the PXI-6704, (it has 16 extra AO points) to PXI 1031, in one of the free slots.
1.What are the precautions to be taken?
2. Is it just removing the screws and just inserting the card?
 I also bought the SCB 68 terminal board and NI-SCB-68 Shielded desktop connector block.
1. How can I connect the terminal block into the Shielded desktop connector block? What are the precautions?
2. SCB-68 pin diagram show only 68pins with 2 AO points than how can I use it for 16more AO points what will be the pin connection?

Hello,
Inserting the PXI card is as simple as removing the slot blocker on the front of the chassis, inserting the card and tightening up two screws. Don't force the card in, there are rails and it should slide smoothly until the card is nearly fully in and then you will feel some resistance as the card slides home. Dont insert the card with the PXI chassis powered on and don't force the card. Sometimes the cards can be a little stiff when inserted so don't be afraid.
I am confused by your comment on the SCB-68 terminal board and SCB-68 shielded connector block. The SCB stands for 'Shielded Connector Block'. You cannot connect the terminal block into the Shielded desktop connector block as they are one and the same thing.
The SCB-68 diagram will not tell you where to hook up your wires. You need to study the pinout for the 6704 card. It will tell you which pin on the SCB-68 you need to use for the AO's.
You have this already installed on your computer, goto Start>>Program Files>>National Instruments>>NI-DAQ>>NI-DaqMX Help. This Help file contains a section called 'NI-DAQmx Device Terminals>>DAQ Devices and then lots of cards underneath. Scroll down to the NI 6704 and you will see which pins on the SCB-68 route to which channels on the PXI board.
The SCB-68 works with a huge number of different cards and as such needs to be non-specific in terms of which pin goes where- so the pinout for the connector block changes depending on which card is connected
I hope this clafafies things a little,
Regards,
Dave.
Senior Software Engineer
www.Adansor.com

Similar Messages

  • How can I install Chinese Language into my 8310?

    I brought a Blackeberry 8310 yesterday, but it merely contains English & Spanish. If I want to install a Chinese language, Where can I download it and how can I install it?

    Welcme to the Frums!
    Do you sync to your computer and desktop manager? Here is a link to another person with a similar question to yours. 
     http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=8990&query.id=153291#...
    Nurse-Berry
    Follow NurseBerry08 on Twitter

  • How can I install lightroom 5 into windows vista?

    I can download it with Adobe Application manager, but when I am doing an installation, it says me that there is error!!!
    Help me please, how i can istall lightroom into my laptop, i have windows vista business (service pack 2).
    Thank you very much!

    http://helpx.adobe.com/lightroom/kb/windows-vista-supported-lightroom-5.html
    "Windows Vista is not an officially supported operating system for the release version of Lightroom 5, and it doesn't run on Windows Vista."
    Lightroom 5 requires Windows 7 or Windows 8.
    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
    Unofficial workarounds exist online to get Lightroom 5 running on Vista but try them at your own risk. There will be no support if anything goes wrong.
    http://forums.adobe.com/message/5977691#5977691

  • How can I install all my music and movies that I bought into my computer?

    How can I install all the musics and movies that I bought from iTunes into my computer?

    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store

  • How can I install presets into Lightroom 4.4 64 bits?

    How can I install presets into lightroom 4.4 64 bits?

    Hard to know where the ball got dropped without details.
    I suggest creating a new "test" preset in Lightroom, then make sure you can find it in OS (Finder/Explorer).
    Wherever you found it - that's the folder your other presets should be in. If they are already in that folder, then the preset files are not copacetic somehow (e.g. not compatible type).
    they should end with .lrtemplate
    ~R.

  • How can I install WIFI into my nightblade B85

    How can I install WIFI into my nightblade B85

    Or buy a USB dongle like this one.
    http://www.scan.co.uk/products/netgear-ac600-wifi-usb-mini-adapter
    If you look through the web or shops, you can find cheaper ones. Just an example

  • How can I install my twain Scanner into Elements 12

    How can I install my twain Scanner into Elements 12? I tried the solution showed on Adobe Web (Copy the folder ImportModules from Optional Plug-ins to folder Plug-ins) and did not get results. Is there any other procedure to do? My computer is MAC. Thanks!!!

    Hi Barbara.
    1) I restarted the computer
    2) The drivers are the latest
    3) Samsung Multifuncional CLX-3185FW
    4) OS X 10.9.4
    I have Elements 8 Installed and recognize the scanner on the "import menu".
    Any idea?
    Thanks for the help.

  • How can I install Win XP on Satellite U300-150 PSU30e

    How can i install win xp on U300-150 / Model : PSU30e
    I try to boot from CD Win XP SP2 but cannot not detect any HDD.
    How can i do it ?
    There is no option on bios for SATA support or IDE
    please help me

    Hey buddy
    You will not find any SATA or IDE settings in the BIOS. The problem is that you have not installed the SATA driver which is necessary to install the XP on this notebook.
    The key is Intel Matrix Storage Manger!
    The Storage Manager has to be included into the Windows XP OS during the setup procedure using the button F6.
    At the other hand you could include the Storage Manger using the free application called nLite.
    Search a little bit in this forum. There are enough threads and postings regarding this theme.
    Ciao

  • Can I install an SSD into my MSI GE620DX laptop?

    Can I install an SSD into my MSI GE620DX laptop?
    Couldnt find any information on the site or the manual about that, Im thinking of ordering an SSD but I dunno if I can put whatever type of SSD in there.
    The 128gb SSDs in sweden are just in my price-range right now and it would be reeeally nice to check out how fast this thing can run... :D.
    My laptop is the i5-2410m-version.
    Reason I wanna upgrade to SSD is obviously because of improved performance but also that I can probably turn the current built-in HDD into an external device maybe? I am setting up my laptop for music production and I just want a fast SSD for windows,software. Other HDDs for recording audio, having projects on them and so forth.
    The HDD in mine is the 500gb/7200RPM one, I hope I can turn it into an external somehow(read that you can somewhere and I assume most drives can be turned into external HDDs???)

    Shouldn't be any problem. You can replace the 2.5" HDD of your notebook with any 2.5" SSD. Be aware that you need to reinstall Windows unless you have a software to clone the current on the SSD.
    With an external USB hdd case you can use the HDD as an external drive. However if you erase the current partitions you will loose the possibility of using the F3 recovery with the HDD reinstalled if the Windows on the SSD gets destroyed by a virus or similar problems.

  • How can I install Adobe Acrobat without installing the browser extensions?

    Hello All,
    I am a computer Technician at a high school and we have very strict browser requirements for different services. We need to use Adobe Acrobat to convert PDF's, and other tasks, and we need to use Chrome to open Adobe Reader files. The issue is that I want my 3 browsers (Chrome, IE, Firefox) to open PDF files using Adobe Reader XI. All my plugin settings are correct to use Adobe Reader to open PDF's, but it either downloads a PDF to the computer, or opens up in the browsers default reader (Chrome does this), or opens up to a blank page with a blank error message. I went into the programs Internet settings for Adobe Reader and Adobe Acrobat and it's telling me the browser opens them up using Adobe Acrobat (With no option to change the setting). The problem is only solved when I uninstall Adobe Acrobat.Then I am able to open PDF's in Adobe Reader just like I want (but this gets rids of Acrobat). This leads me to believe that when I install Adobe Acrobat, there is a registry key or something that is telling the computer to open PDF's in browsers using Acrobat. My initial question is this: How can I install adobe Acrobat without linking it to the browser. I JUST want Adobe Acrobat as a program installed on the computer.
    Additional Info:
    - I build a computer image and use that image on several computers. This issue persists with all of the computers I installed the image on.
    - I am using Adobe Reader 11 (Now DC, but I am willing to use either) and Adobe Acrobat Pro CS3 (I think it's version 9?)
    Thanks for the help.
    - Charlie

    No answer yet. Paging Acrobat support.... Where are you?

  • I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

    i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

    If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    If you have an earlier model:
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • How can I install Windows 7 on Macbook Pro 17' (2009 model)?

    I cannot Install, neither enter on the setup screen.
    When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
    I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
    When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
    Pease help ?

    Let me get this - because the title misled me as to what you are asking, ie:
    I cannot Install, neither enter on the setup screen.
    When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
    I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
    When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
    Does the above really tell the story?
    The issue isn't "How can I install Windows" but more like "I am trying to get past " an issue with Boot Camp 4.01.
    Some people that already had BC 4.x installed had trouble after March's "Patch Tuesday" which was a critical number of security patches and updates. They had to rollback, uninstall an update/driver, before they could move forward.
    The trouble with "had to zap pram to get back to Mac OS" is more to do with the health of the partition table and nvram, and you could try using both Windows control panel to set the default OS, and set Startup Disk control panel in Mac OS (click OFF the volume name, then back to the volume, too).
    Sometimes there are problems with 3rd party NTFS for OS X that people use as well.
    Boot into Lion Recovery - that should be first step if there are problems with Mac, and you don't sound like you tried boot Windows DVD (which I asked above, which can fix errors).

  • How can I install my iMac's Aperture on my MacBrookPro

    How can I install my iMac's Aperture on my MacBrookPro

    What is your MacOS X version? Is your Aperture version the recent Aperture 3.5.1? Your profile signature "Mac OS 9.1.x? " cannot be right; do you mean Mac OS 10.9.1.x? And is the system the same on both Macs?
    If you bought Aperture from the AppStore, launch the AppStore on your MBP:
    Sign into the AppStore  with the AppleID you used to buy Aperture on your iMac.
    Download Aperture from the "Purchased" tab and let it install.
    If you bought Aperture  as a boxed retail version, use the Installer CD/DVD and serial number to install Aperture  on your MBP.
    If you bought Aperture online as a trial version, and bought a serial number to unlock the trial, use the trial installer you downloaded.
    If you no longer should have the installation media or the downloaded trial installer, you can convert your working Aperture installation to an AppStore licence by upgrading your iMac version to Aperture 3.5.1.  Then you can install and reinstall from the AppStore on all your Macs, if they are running Mavericks.

  • How can I import iPhone contacts into Mac Address book

    I recently purchased a MacBook Pro and am in the process of trying to dump my Windows PC.
    All of my important contacts are on my iPhone. How can I get those contacts into my Mac Address Book?
    The same question goes for the music (ripped from CD) and my video files that are on my iPhone? The media is not that big of a deal because I can easily transfer it from my PC to my Mac but I assume I am not the only one in the world trying to do this and that Apple would make it very easy for MSFT Windows users to easily migrate to Macs.
    I must be an idiot but I don't see any option in iTunes to transfer the data from my iPhone into iTunes and/or the Address Book.
    Thanks

    The iPhone's primary function is NOT a word processor or a spread sheet analyzer.
    I didn't say, nor was I trying to imply ANYTHING of the sort. You should read what I provided again a little slower and in it's entirety, not taking this out of context, which you made into Apples and Oranges.
    It IS an iPod, a device designed to store and play music (in addition to being a browser and a phone).
    It is a phone, an iPod, and an internet device, which supports transferring iTunes content from iTunes on a single computer ONLY.
    Making it difficult to transfer my legal music from my iPhone to my Mac does not make me want to go out and buy more Apple products or Apple software.
    Good, then don't - no skin off my back. I couldn't care less if you want to remain a Windows sufferer. All this doesn't come from Apple. Much of it comes from those who OWN the distribution rights for content sold thru the iTunes Store.
    All of Apple's commercials imply how easy the user experience is over Windows. Well, in this case, they missed the boat BIG TIME!
    Everyone is entitled to their opinion, but let me get this straight. You will likely need to transfer much more than just music from your Windows PC to your Mac and if so, how do you plan on accomplishing this? If you are transferring Word and Excel files, photos, and any other data, you won't be using an iPhone for this, so I don't see the big deal with transferring your iTunes library along with all other data being transferred.
    I understand that the iPhone was not designed to be used as a backup. However, you allow the contacts to be merged in but not the music that I legally installed (but didn't purchase from the iTunes store).
    I don't allow anything - this is a user to user help forum only.
    As I provided in my first post in this thread - the sync process for contact information, calendar events, and bookmarks with an iPhone is bidirectional with the supported application on your computer. This is a sync process by definition of syncing - which is not the same for other data such as iTunes content and photos transferred from your computer to your iPhone.
    http://support.apple.com/kb/HT1296
    Apple wants to make it difficult unless I purchased the music from iTunes.
    No, Apple or really those who own the distribution rights or the copyright holders for content sold thru the iTunes Store wants to make this difficult. Content sold thru the iTunes Store is set up by Apple to be a break even - which is included with the Apple stockholder's report. Apple makes their profit via sales of the iPod and iPhone. The bulk of the iTunes Store revenue goes to those who own the distribution rights or the copyright holders for the content.
    In addition, if my hard disk suffered a crash and I lost all my music it just seems stupid not to be able to pull it off my iPhone (yes, I know data should be backed up on a different drive, and mine is, but I am sure a lot of people do not back up their data).
    Maintaining a backup of your data is important for this very reason, and for other reasons which is not Apple's responsibility. I believe iTunes includes an occasional warning message to backup your iTunes library (which can be turned off), and iTunes includes an option to transfer content purchased from the iTunes Store from an iPod or iPhone - since the overwhelming majority of this content includes DRM protection required by those who own the distribution rights or the copyright holders.
    The iPhone was not designed as an external storage device or as a backup device - end of story. If someone chooses not to maintain a backup, they are playing Russian roulette with their data. Maintaining a backup is important regardless the platform, but even more so when running Windows with constant virus, adware, and spyware concerns.

  • How can I install a prior version of Photoshop Elements?

    I own the CDs for Photoshop Elements 11, but have never installed it. How can I install PSE 11? I've loaded the serial numbers into my account, but I don't see any place to download PSE 11.

    Download the trial version from
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    Follow the Very Important Instructions on that page first BEFORE you click the download links.
    Install the trial and enter your serial number to license it on your computer.

Maybe you are looking for