How can I install SL 10.6.3 on my brand new !00GB SSD HD?

Question

How can I install MAC OS X Snow Leopard version 10.6.3 in to my brandnew Samsung 100GB SSD ?. I have a MacBook Pro model A1150 , 2GB memory and just bought the Mac OS X Snow Leopard version 10.6.3.
alexandervuong

Answer 1

Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc.  Insert the disc into the
         optical drive and restart the computer.  After the chime press and hold down the
         "C" key.  Release the key when you see a small spinning gear appear below the
         dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.)  Click on the Partition tab in the DU main window.  Set the number of
         partitions to one (1) from the Partitions drop down menu, set the format type to Mac
         OS Extended (Journaled, if supported), then click on the Partition button.
     3. When the formatting has completed quit DU and return to the installer.  Proceed
         with the OS X installation and follow the directions included with the installer.
     4.  When the installation has completed your computer will require a restart after
         which you will be running a fresh install of OS X.  You can now begin the update
         process by opening Software Update and installing all recommended updates to
         bring your installation current.
First you will have to prep your new SSD:
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.