How can I install Win XP instead of Win 7 on mac?

I bought a MacBook Pro 2.3GHz dual-core Intel i5 (Mac OS X 10.6 Snow Leopard) and found out the Boot Camp requires windows 7.
I don't have windows 7 but windows XP (SP3). I have already finished the partition by bootcamp and succeed in windows XP installation, but when I put the Mac OS X install DVD to finish the installation, it showed the sentence that windows 7 is required.
Is there any way that I don't need to buy a win 7? Thanks

Apple has abandoned BootCamp support for XP and Vista with their 2011-released models.
http://support.apple.com/kb/HT4410
It might be possible to get the basic drivers from the various hardware manufacturers (like Intel, ATI/AMD, Broadcom, Realtek, etc.) but any Apple-specifc hardware component won't work.
You might be better of getting/using Windows 7
Stefan

Similar Messages

How can I install Win XP on Satellite U300-150 PSU30e

How can i install win xp on U300-150 / Model : PSU30e
I try to boot from CD Win XP SP2 but cannot not detect any HDD.
How can i do it ?
There is no option on bios for SATA support or IDE
please help me

Hey buddy
You will not find any SATA or IDE settings in the BIOS. The problem is that you have not installed the SATA driver which is necessary to install the XP on this notebook.
The key is Intel Matrix Storage Manger!
The Storage Manager has to be included into the Windows XP OS during the setup procedure using the button F6.
At the other hand you could include the Storage Manger using the free application called nLite.
Search a little bit in this forum. There are enough threads and postings regarding this theme.
Ciao

How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

How can I install an OLDER version of iTunes-- on a Mac?

I upgraded to iTunes 9.1--- and now it won't connect to the iTunes store. How can I go BACK to an older version. This is terrible--- and Apple is NOT HELPING!
It seems to be a common problem.
Help!

to downgrade to a previous iTunes version, you could try this user tip that seemed to have worked for some:
+1) Quit iTunes.+
+2) Delete iTunes from your Applications folder.+
+3) Go to your ~/Music/iTunes folder. Delete or rename the "iTunes Library" file.+
+4) Open the "Previous iTunes Libraries" folder and look for the backup of your old pre-9 library; it should be dated at about the time you first ran iTunes 9. Copy it back out to the ~/Music/iTunes folder, and rename it to "iTunes Library".+
+6) click here to download iTunes 8.2.1. The page says it's for G3, but the Read Me file says it'll run on G4, G5, and Intel too. Open the disk image and run the installer.+
+You should now be able to run iTunes 8.2.1 again.+
+And your iTunes will restore to before you upgraded and you won't lose anything+.

How can I install window 8 on external hard drive on mac mini

So, I have mac mini and I'd like to install win8 on external hard drive and can anyone give me guides to do it?
also I wonder would I be able to run win 8 after installation using parallels desktop?
thanks in advance

I have to agree that Windows8 is a waste of time, especially if you don't have a touch screen and compatible apps.
However, the latest version of Parallels supports running Windows8, Parallels can either run Windows from a 'virtual disk' file which can be stored wherever you want including on an external drive, or it can also be configured to run Windows from a Boot Camp partition created using Apple's Boot Camp Utility.
See http://download.parallels.com/desktop/v7/update2/docs/en/Parallels%20Desktop%20U ser's%20Guide/32733.htm
In order to run Boot Camp from an external drive and therefore be able to setup the Boot Camp partition on the external drive you first have to install and run OS X on the external drive. Then the Boot Camp utility will let you add the Boot Camp partition on the external drive. You cannot run OS X and the Boot Camp utility from an internal drive and try adding the Boot Camp partition to the external drive. The Boot Camp Utility only lets you add the partition on the same physical drive it is running from.
Personally I have legal XP and Windows7 licenses (currently using Windows7) and even if the Windows8 upgrade was totally free of charge I would not bother with it. I would also not bother with it at work as an IT Manager.

How can I install a Brother DCP 165C printer that my mac is not finding?

I have just bought a DCP 165C second hand, so it doens't come with a CD for installing. I have however downloaded the driver for mac from the Brother website and installed it into my computer, and it said the installation was succesful. I then plug the printer to my computer, via USB, then I go to add my printer as I normally would and have; through preferences- but it's not showing up in Default. I have tried Advanced but I don't know what to put in the url because of course the printer doesn't have one, it's just there, connected via USB.
I have also resetted the printer system and now don't know what else to do.
I really need to print, please help!

catlopera wrote:
It just doesn't want to work...
It is not recognising anything and if I go to add printer, no printers come up.
I'm waiting for a new USB cable to see if that is the problem
I'm sure this is maddening for you.
To be sure the printer works, can you print a report, e.g., User Settings, using the LCD Panel?
Your screenshot shows the window titled, Install BrotherTWAIN, which is the software for the scanner. The window for the printer software title should be, Install BrotherCLDrivers. If you have not already done so, download the CUPS Printer Driver. Then install and try to add it in Sys Pref > Print & Scan. If the problem persists, try the Brother troubleshooting steps for print issues with USB connections.
As for the "Failed to connect to the device" error, that used to happen often with my Brother MFC device for the scanner. Turning the unit off, waiting 30 seconds, and then turning the unit back on works. However, my unit is connected to my network and I scan using other software, i.e., not the Brother Control Center software.
I just noticed that the USB port is inside the DCP-165c printer. You might double check that the cover is not pinching cable anywhere along its path.
HTH and Good Luck!

How can I install CS-3 from a disk on a Mac with Mountain Lion?

I have CS-3 on a disc, was using Mac Leopard. Just bought a new Mac Mini with Mountain Lion and when trying to install from the disc, it did not install but put a message "contact Adobe". The "chat" agent says he only deals with CS-6 and CC, suggested I try asking here.

Download a trial version from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Follow the Very Important Instructions (steps 0 to 6) on that page first BEFORE you click the download links.
Install the trial then enter your serial number to license it.

How can I install windows XP or win 7 32 bit in MacBook Air 2013

Hi,
I want to install windows xp or windows 7 32 bit on new MacBook Air 2013 with bootcamp 4.
Apple says MacBook Air 2013 mid 2013... Comes with bootcamp 5.
And bootcamp 5 support only 64 bit windows....apple says.
I want to install win xp or win7.32 bit with bootcamp4.
Can we downgrade the bootcamp by uninstalling or something...?
Or how can I install 32 bit windows on new MacBook Air 2013.
Thanks I advance.
Please guide.

Bootcamp 4 which ships with Lion doesn't support XP or Vista, only 7. Try using Parallels or VMWare instead.

I'm a long time PC user and just bought a 64 bit iMac and want to use BootCamp to play old PC games. Can I install Win XP or if it needs Win 7 can it be a 32 bit version, and how do I do it?

I'm a long time PC user and just bought a 64 bit iMac and want to use BootCamp to play old PC games. Can I install Win XP or if it needs Win 7 can it be a 32 bit version, and how do I do it?

Once you get windoze up an running on your new iMac, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

My Elements and Premier DVDs are corrupted physically. How can I install them via online instead?

I bought Photoshop Elements and Premeire Elements 10 sometime ago and forgotten about it. The box was sealed but the DVDs had streaks for white stuff and thus the drive is unaable to read. How can I install it via online? Please lead me to the link that I can key in the serial numbers as I am unable to find in this website. Thank you. As they have never been installed, the serial number is not in the my Adobe ID account yet. Hence I wish I can freshly install them via online. Thank you.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

How can I install and run a Windows program on my MacBook Pro/?

How can I install and run a Windows program on my MacBook Pro?

You have several options.
1, Use a Virtual Machine like Vmware, Parallels etc... to Create a Virtual Windows Installation and Run your program in there. A Virtual MAchine will runn in a Window on your Desktop and share your Mac's resources RAM HD space processor. Your MAc desktop will still be available while you run Windows install.
http://www.parallels.com/
2. Install Windows on a partition using Bootcamp. It will run a full installation of Windows you can boot into, and run your programs. The Mac desktop will not available until your reboot the computer and start in OSx instead of Windows.
https://www.apple.com/support/bootcamp/
3. Use Wine / Winebottler to run the Application without the need for a complete Windows installation.
http://winebottler.kronenberg.org/

How can I install Adobe Reader 11 to a drive other than C:\?

I downloaded Reader 11, but at no point during the installation process am I prompted for an installation location. How can I install this to a drive other than the C:\? I keep my C:\ and data storage drive separate so in the event the OS crashes I won't lose my data. I have limited storage capacity since I'm on a laptop so I didn't make my C:\ very large, so that I would have more room for my D:\. Any suggestions?
Sincerely,
LT Gannon

having data on a different drive is a good idea. installing programs on a drive different from you os containing drive is generally not a good idea. but if you have the expertise and are sure of what you're doing:
mac: ftp://ftp.adobe.com/pub/adobe/acrobat/mac/11.x/11.0.00/misc/
win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5515

Can't install win 7 using boot camp in Lion

Hi !
help please!!
i can't install win 7 (any version) on my MBP 13", i'm running Lion and that's when it all started!
had no problem on SL using boot camp and win 7 but now my win 7 installation just stops on last
install step screen and that screen is there forever...
did my steps like i've always did it using snow leopard and now it just won't work...

Are you trying to install the 64 bit version of Windows 7? I get exactly the same problem. I'm going to try the 32bit version and see how I get on. I don't think 64 bit is supported just yet.

How can i download win 8 64x driver for mac early 2011

hi my friends
how can i download win 8 64x driver for mac early 2011

How did you download it? Did you download it from withing Boot Camp Assistant and save it in accordance with the instructions? How did you try to install it? You install the Windows Support software from within Windows. Did you read and follow the Boot Camp installation guide and help files?

How can I install Win XP instead of Win 7 on mac?

Similar Messages

Maybe you are looking for