How can I integration BPM with OWC spaces

I use BPM 11g PS4 (11.1.1.5) and I want to integrate my process spaces and displayed in webcenter spaces.
I read and practice from http://andrejusb.blogspot.com/2011/02/bpm-portal-11g-ps3-how-to-configure.html and http://andrejusb.blogspot.com/2010/11/bpm-portal-how-to-configure-oracle-bpm.html
but version of bpm in two link is bpm 11g ps3 (11.1.1.4) .
I step by step configuration but it's doesn't work with my bpm version.
Please answer me if who was resolve the same issue :-) . Thanks.

Are you saying non of the build-in templates in the iPhoto>Share>email is adequate ?

Similar Messages

How can i get more local storage space on my iphone 4

I want to put more song on my iphone 4 but it keeps saying i dont have enough local staorage space. How can i get more local storage space on my iphone 4?

You don't. Delete 'stuff' you don't need or buy a phone with more storage. you can not increase or upgrade the internal storage in the iPhone.

How can i clean up my disk space on my MacBook Pro

how can i clean up my disk space on my MacBook Pro something like a disk cleanup on a pc?

Those things you did on your PC you need not worry about on your Mac. Most is done behind the scenes.
Kappy's Personal Suggestions About OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.)
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (There is no confirmation that this version also works with Lion or later.)
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Additional suggestions will be found in:
      1. Mac Maintenance Quick Assist,
      2. Mac OS X speed FAQ,
      3. Speeding up Macs,
      4. Macintosh OS X Routine Maintenance,
      5. Essential Mac Maintenance: Get set up,
      6. Essential Mac Maintenance: Rev up your routines,
      7. Maintaining OS X,
      8. Five Mac maintenance myths,
      9. How to Speed up Macs, and
    10. Myths of required versus not required maintenance for Mac OS X.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space.

I have iPod shuffle 2nd gen. 1GB, how can I autofill it with more than 70 songs?

I have iPod shuffle 2nd gen. 1GB, how can I autofill it with more than 70 songs, when I used to be able to get more than l20+ songs?

Is your shuffle full after the Autofill? Does the playlist you selected as the source have more than 70 songs?
My 2nd gen 1GB shuffle currently has 140 songs on it, almost 100% full using Autofill. The number of songs depends on two factors. One is the average length of the songs. Longer songs take more space. A 20-minute symphony takes more space than a 4-minute pop song. The other key factor is the bit rate used for compression.
All of my songs are compressed using the AAC encoder at 256 kbps, which is Apple's current standard and the setting used for downloads from the iTunes Store. The same songs compressed at 128 kbps AAC takes up half the space. 320 kbps MP3 would use more space per song. If a lossless format, such as Apple Lossless or AIFF is used to encode, the sound quality is the best possibe, but the file size per song is MUCH higher.
If you think there is problem on the shuffle, you can try doing a Restore in iTunes. The Restore button is on the shuffle's Settings tab. This will erase the shuffle, re-install its software, and set it to default settings. If there is data corruption on the shuffle's storage that is causing this problem, a Restore should fix it.

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

My iTunes library is missing since upgrade Lion 7.2. I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each one upon reinstalling the backup copy? Thank you for help

Almost my iTunes library is missing since upgrade Lion 7.2. (the last 2.5 weeks worth of added music has transferred post-upgrade, none of whcih was bought from iTunes)
I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each playlist upon reinstalling the backup copy? This would save a HUGE amount of time and efforts. Thank you for your help!

hi Limnos,
I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th. (90% of the media is missing, along with all playlists) The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29. (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
I have my iTunes folder backed up on both an external drive as well as Time Machine.
I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up.
Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
Thank you for your help!
Deb

How can I start anew with Photos and clear the (minimal) stuff it has uploaded

I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>

How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

I cant remember my password to logon to my mac, how can i change it with out needing the old one?

i cant remember my password to logon to my mac, how can i change it with out needing the old one?

http://support.apple.com/kb/HT1274

How can I copy songs with metadata (added in iTunes) from my PC to my new iMac?

I have iTunes 12.0.1 on my Windows PC. I'm about to get a new iMac (hooray!) and I'm beginning the process of transferring everything on my PC to my Mac. I've got all the documents, pictures, files, etc. covered, but now I have to make a copy of all of my music.
Most of the music in my iTunes library is not bought through the iTunes Store (I download most of my songs from the Internet). Then, after saving the downloaded song to my computer, I go into iTunes on my computer and add the song. I also add metadata like artist, album, genre, album artwork, etc. to the song in iTunes. What concerns me is that only the songs in iTunes have this metadata: the original downloaded files I saved onto my computer don't have any metadata.
I really don't want to have to go through the long and tedious process of adding artist/album names, genre, etc. to every single song in my iTunes library on my new iMac. How can I copy songs with metadata (added in iTunes) from my PC to my new iMac?
Thank you so much for any help!

Hello! I'd like to learn more about Home Sharing. To do this, would both my PC (which I hope to get rid of) and my new iMac need to be plugged in?
Also, after Home Sharing with the old PC is initiated, I understand that all my songs would appear on my iMac. Is there a way to copy all of these (with album artwork, name, artist, etc.) directly to the iMac's hard drive and then disconnect home sharing so I can get rid of my PC?
Thank you!

I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card. How can I buy Pages with my iTunes card to my iPad? thank you

I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card. How can I buy Pages with my iTunes card to my iPad? thank you

Have you redeemed your iTunes card to an account associated with an Apple ID?
Once you have your iPad associated with an Apple ID AND you have an account with a credit card associated with the same Apple ID AND you have some 'store credit' (from redeeming your iTunes card) then purchases use the store credit before they charge the credit card, so you should be ok!
Personally, I use 'store credit' as a way to monitor whether or not there have been any 'unauthorised' purchases because as soon as the store credit is zero, the security code from the credit card is needed for further purchases! It does mean that I have sometimes to top up store credit before making a purchase, but 'better safe than sorry'!

HT2486 My address book only displays e-mails. How can I sync it with my i-phone to display the address book the same way as my contacts in my i-phone?

Currently my address book only displays e-mail addresses. It uses the portion of the address in front of the @ as the name. How can I sync it with my i-phone 4S that has name/numbers and addresses of my contacts?

Hello there, Seta.
You are correct that this can be done with iCloud. The following Knowledge Base article provides some great instruction for syncing contacts:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/ht1296
Particularly:
Contacts, Calendars, Bookmarks, and Notes
You can sync contacts, calendars, bookmarks, and notes with other applications on your computer. This allows you to keep all your information in sync across multiple computers and iOS devices. The settings for these items are all in the Info tab for your iOS device in iTunes. With your iOS device connected to the computer, select your iOS device. Then click the Info tab.
For details on syncing content on your iOS device with your computer, click the sections below.
Contacts
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Contacts" in OS X v10.8, or "Sync Address Book Contacts" in OS X v10.7 and earlier.
You can sync your contacts with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, Windows 7, and Windows 8)
Windows Address Book (Windows XP)
Windows Contacts (Windows Vista, Windows 7, and Windows 8)
Address Book (Mac OS X v10.7 and earlier)
Contacts (Mac OS X v10.8)
Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
Notes:
When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail. You will need to configure it with the user name and password for your Yahoo or Google account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How can i share documents with different users on the same mac?

How can i share documents with different users on the same mac?

Shared how? The other users can read the documents or you all can read and write the documents?
The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
The second is a bit trickier.

I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

try
http://support.apple.com/kb/ht2589

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

How can I use Bluetooth with another devices?

How can I use Bluetooth with another devices?

You can set up your FaceTime account in Settings > FaceTime.

How can I integration BPM with OWC spaces

Similar Messages

Maybe you are looking for