How can I interchange a Toshiba external drive with my Mac and Windows? It only works read only with the Mac.

I bought a Toshiba external drive IT and I can copy files to it from my Macbook Pro 5,3. I would like to know how canI interchange files with Windows and the Mac.

If the disk is read only, it is formatted for Windows and the Mac can't write to it
Reformat to FAT32
This will of course wipe all data so move it first
Allan

Similar Messages

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work.

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I 'see' what my external drive has backed up?

After losing info on my computer, I got a 1 Terabyte for the Mac back-up drive and it seemed to do its thing. Now, how do I see all the things its backed up? I want to make sure my music is there.

Hello again amember.
OK, so you are using Apple's own "Time Machine" for your backups.
You can change the interval at which TimeMachine backs up using the hint at http://www.macosxhints.com/article.php?story=200710291721156
Alternatively you might want to try the "donationware" software available at http://www.klieme.com/TimeMachineScheduler.html which fortunately overcomes the need to play around with text editors and plist files directly, though it still seems to need a few bugs sorted out.
Cheers
Rod

How can i access my lacie external drive with os mountain lion

I have just upgradet my macbook pro from snow leopard to mountain lion, and now i can't restore my backed up files from my Lacie external drive.
When i try to connect to it through time machine or migration assistant i get the message:
"the version of the server you are trying to connect to is not supported"
I have tried to enable all UAMs but i still can't connect.
I have browsed after other similar situations, but i can't seem to find any though i'm hardly the only one with this problem.

If the backup was made using time machine, you should be able to access any files you need or want manually using the finder. It may not be pretty, but it should work. I don't know why the migration assistant would be unable to access it though.
If you can't access the contents of the backup with the finder, then I would say your problem is a bit more serious.

How can I install Tiger on external drive

I have a maxtor external drive and I am trying to install tiger onto it but it is not installing properly. I have a imac g5 and I have the drive connected to it. It allows me to perform the install but then when I use it as the boot disk it goes through all the process and it goes to unix with panic...something about hanging here.
Thanks
imac G5 Mac OS X (10.4.4)

Hi Harrison,
is this a firewire drive? Be aware that you cannot boot from a USB drive: Don't start up from an external USB device.
Also make sure your drive's firmware is up to date.

How can I get audiobook chapters back after upgrading i Tunes and i Pad? I onlynave maprmparts of the book now.

How can I retrieve individual chapters from an audio book after upgrading my i Pad 2. I now only jave the majormpart pf the bookmthat I had purchased via i Tunes.

I had saved my photos on my WD My passport but I think it was only saved like a preview.
We need to know more, to be able to understand what you have done.
How did you save your images to the external drive? Did you copy your Aperture library there?
Is your Aperture library referenced or managed - did you store the original image files outside the Aperture library or are they included in your Aperture library? If you have referenced images, did you back them up too?
The error message you are seeing, shows that Aperture cannot find the original image file. That is indicated by the yellow warning badge with the arrow.
If your Aperture library is referenced, you need to restore your backed up original image files as well from their backup, and then use the the command "File > Locate Referenced Files" to reconnect the image versions with the missing original files. Do you have a backup of the originals? If you cannot restore your referenced originals, you can turn your previews into new originals; post back, if you need help with that.
If your Aperture library is managed, and all your originals are included inside your Aperture library, try if the Aperture Library First Aid Tools can fix this:
Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Check if the "Masters" folder inside your Aperture Library contains any image files: Crtl-click the Aperture library and use "Show Package Contents". Are the missing original image files inside?
Reagrds
Léonie

HT4972 How can i download a folder of photos from my computer and have them appear on my ipad in the same order as they were in on my computer

How can I download a photo folder from my computer and have them appear on my ipad in the same order as they were on my computer

The sort order on iOS 5+ is by the photos 'date modified' field, on iOS 4 it's the 'date taken' - so you will need to modify that field on your photos.
Or you could consider using a third-party photo management app such as Photo Manager Pro which allows you to change the sort order within the app e.g. by date, size, type or you can drag them into your own sort order.

How can I tell if my external drive is formated to GUID?

Just swopping an SSD for my HDD in a mid 2009 macbook pro. I want to boot up from the ssd while it is still external via USB to save the bother of fitting it and finding it doesn't work. I've cloned the hdd to ssd with carbon copy cloner succesfully but when I hold option down while booting up the ssd is not an option. I'm worried that I didn't check that the ssd was formated to GUID at the very beginning of the process and that this might be the problem. Is there a way of finding how the ssd is formated?

Choose Utilities from the Finder’s Go menu, open the Disk Utility, click on the drive in the sidebar, and look at the Partition Map Scheme.
(121994)

How can I boot from an external drive?

I am unsuccessful trying to have the external backup drive to boot the Powerbook. I tried first a USB Lacie Mobile Disk, then thinking USB was the problem I got a FireWire Little Disk of the same brand. None will boot even if the disk appears in the startup disk control panel. When I boot with option key, the choice is no longer there. Maybe they require a power supply other than the USB power lead? Any experience?

USB drives are not bootable for PowerBooks. FireWire drive usually needs to be used with the power supply since it consumes more power than the USB
Right! So there is no way to boot from an external without a power source.
Thanks Arnie.

HT1351 Some of the songs I bought from iTunes will not sync to my iPhone. They show up on my phone, but the letters look faed and I can't play them. How do I fix this? I tried restoring my iPhone and it didn't work.

Some of the songs I bought from iTunes will not sync to my iPhone. They show up on my phone, but the letters look faed and I can't play them. How do I fix this? I tried restoring my iPhone and it didn't work.

Sorry, I meant the letters look "faded" not faed.

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive is malfunctioning.

How can I transfer Itunes from external hard drive to a new computer?

Hello,
I had a Dell laptop with Windows XP on it recently crash, but I have everything saved to a Seamagine external 1 terabyte hard drive. I have about 250 gigabytes of media on it, mostly CD's and audiobooks. The setup I had on the XP computer was my Itunes folder saved on the C drive, but I kept all the actual music and audiobooks on the external hard drive, which was labeled the F drive.
After the crash, a relative sold me their three year old Compaq laptop, with Windows 7 instead of XP as the OS. My relative already had Itunes downloaded on it, but when I opened the Itunes on the new (new to me) laptop, Itunes only recognized their (my relative's) account. So, I uninstalled their Itunes and then I re-downloaded Itunes for 64-bit Windows 7. I then opened the Windows Explorer folder so to drag and drop my backed up Itunes folder and library information from the old C drive to the new Itunes folder in the new C drive. But, it wouldn't do anything. It still wanted the password info from my relative's account. It wouldn't recognize my account, even though I had uninstalled and then reinstalled a newer version of Itunes. Dragging and dropping my backed-up Itunes folder from my external hard drive to the new C drive didn't work because it said it didn't have certain permissions or something like that. I think I might have downloaded a newer version of Itunes, different from what I had saved a couple of days ago, which might be one of the problems here, not to mention that I switched OS's from XP to Windows 7.
When I plugged the external hard drive USB into the new laptop no Seamagine manager came up for user-friendly accessibility. I didn't know what to do, so I installed Seagate Dashboard onto the new computer. It didn't do anything for me either. No problem, I thought, I'll just use Windows Explorer to move the Itunes library, and then once I transfer (i.e., drag and drop) the old Itunes folder to the one, all will be as it was. I could then direct my Itunes account to use my external hard drive as the media source folder. I was wrong. It won't let me do that either. It says I don't have permission to do it.
How c an I get my old Itunes library info onto the C drive of this new computer, but keep the 250GB of media files on the external hard drive, just like the setup I had on the old laptop before it crashed? If you can help me, then you will be my hero. I'm scared to death that I've lost my library info and afraid to mess with it too much more for fear of erasing it or, worse, losing the 250 GB of media that is on the external hard drive, which has taken me a tremendous amount of time and money to compile. It is, in effect, irreplaceable. I'm very worried and frustrated. I've been working on this for days, to no avail. You're my last hope. Thank you.

Hmm, I think we should start over...
Here are the typical layouts for the iTunes folders:
In the image above the red outline denotes the "media folder", that is the folder listed under Edit > Preferences > Advanced. In the standard layout where the "media folder" is inside the "library folder" the iTunes library has the advantage of being self-contained and portable. Since you've lost the "library folder" from your old computer you're going to have to start over so you might as well get organized properly.
If the folder curently holding your media files is called G:\iTunes then rename it as G:\Media.
The support doc How to open an alternate iTunes Library file or create a new one explains how to create a new iTunes library where you want it. In short click the icon to start iTunes and immediately press and hold down the shift key. Keep holding until asked to choose or create a library, click Create and browse to G:\, make sure the folder is going to be called iTunes and click save.
Move the folder that actually holds the media inside the folder G:\iTunes\iTunes Media. We're going to let iTunes reorganize everything (unless you have a collection of .wav files in which case stop and tell me because they require a different approach).
Use File > Add folder to library and select the folder G:\iTunes\iTunes Media. iTunes will search through the whole series of subfolders adding all media files into the library and reorganizing them into the correct artist & album folders.
Again, for data security, you really ought to obtain a second external drive at some point and backup your library to it. Only having one copy, as you have found, leaves you vulnerable to failure. External drives are no less prone to it.
A) Windows uses \ as a folder separator in path descriptions, Mac uses /.
B) Do you have a backup of the iTunes folder that was on drive C:\ or are you simply referring to the location of your media as a "backup" when it really the only copy? If you have a backup copy of your "original" iTunes library you could move/copy that to G:\iTunes shift-start-iTunes to open it, and then I can offer tools or techniques for fixing the links that will be broken becuase the drive letter has changed.
C) Use Store > Sign out and then Store > Sign in to sign into your iTunes account. You will also need to use Store > Authorize the computer to allow playback and transfer of any protected content. If your new library contains protected content from any other accounts then you will have to authorize the computer for those too.
tt2

HT1452 I want to reset the permissions on a western digital external hard drive to work between mac and windows... How can I do this easily?

I have a MacBook Pro and have recently bought a Western Digital external hard drive. I used it on my windows laptop first and unfortunately now on the Mac it is read only. How can I set it so that I can use it successfully between the both the Mac and windows laptop?
Thanks

MacQuack wrote:
You will need to pull all the information off first. The formatting will erase it all.
Use Disk Utility (in Applications >> Utilities or use Spotlight to find it). On the left select your WD drive and then select the Erase tab. Where it says Format, select exFat in the drop-down menu. Next, click Erase and done. It will take approx. 5-15mins to re-format.
Cons: You will be unable to store files 4GB or larger in this format (usually only dmg/iso files or large Outlook files). Also, you will be unable to use Time Machine or other auto-backup programs.
That is not entirely correct, there is no 4G limit using exFat, FAT32 is the one with the limit.

Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

If you want a cross-platform solution that doesn't require the use of third-party software, use an external drive with hardware encryption. The device will have either a physical key or a numeric keypad. I don't have a specific recommendation.

I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?

I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?

Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup. 
You can check that via the right-click context menu of that file and open the Properties. 
If you are not sure about the file type then you can open the file in Firefox via "File > Open File" 
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links. 
A JSON backup starts with: {"title":"","id":1,"dateAdded": 
An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>
You may need to add quotes ("") around the name to rename the file to the correct file extension.
See also:
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

How can I interchange a Toshiba external drive with my Mac and Windows? It only works read only with the Mac.

Similar Messages

Maybe you are looking for