How can I issue a warning if user exits without saving data first?
One of our clients has his users fill the LC Designer PDFs on their web site. They request that the users get a “Do you really want to exit?” warning, if they navigate away from the form, after having made changes to it. I was able to simulate the AcroScript “Dirty” state by comparing the xfa.data.saveXML with the original document content. My problem is that I can’t seem to be able to issue the warning in time for the user to do something about it. I tried to use the DocClose event, but (as described in the documentation) there is no way for the user to go back to the document.
First you need to make sure that you have setup the machine with a valid app store account to tie the machine to the server OS. To boot the MacMini so you can do RAID setup you must boot into recovery mode. Hold down Command+R and power up. Enter disk utility go through the steps to create the RAID which will erase everything on the HD. You need to make sure the build gets completed. Once done reboot into recovery mode again and you can do a OS install. If I remember correctly this will just install the base OS. Once you have setup the machine again with the valid app store account the server app will show up in the app store for you to download.
Of course if you don't want to rebuild everything you can hook up a USB harddrive and turn on time machine. Makle sure it completes and you have several restore points. Go through the RAID build process. Once complete boot into recovery mode, with the USB drive attached, and you will have an option to restore from a time machine backup.
Similar Messages
-
How can we find the list of user exits for a transaction
hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadishhi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen -
How can we find all the available user-exits in sap without using SMOD?.
How can we find all the available user-exits in sap without using SMOD?.
Hi,
Please check this links for user exits list.
http://www.planetsap.com/Userexit_List.htm
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/ab038.htm
Regards,
Ferry Lianto -
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you -
How can I test the IDOC ORDERS05 user exit EXIT_SAPLEINM_002?
We used user exit EXIT_SAPLEINM_002 for changing the PO IDOC values.
When I repeated the PO message to create new PO IDOC, I can not stop the process at the user exit EXIT_SAPLEINM_002. Is there any way to debug the PO IDOC creation at the point of user exit EXIT_SAPLEINM_002, so I can see how the user exit EXIT_SAPLEINM_002 works at run time?
Thank you in advance!
Fisher LiHi
Put a debug point at include ZXM06U02 in user exit EXIT_SAPLEINM_002.
In your PO go to header tab -> output and set ur output type to periodically scheduled job because if that output type is send immediately it will not stop at break point. So select your output type press button Further data and set it to peridically scheduled job.
Then go to we15 give ur application as EF, your Po number and your output type then execute. It will stop at that user exit. -
How can I define global variable in user exit whic I can use anywhere.
Hi all,
How can I define global variable( Table ) which I can use when it come back to same user exit where I defined and stored some data.
What I mean is I want to define 1 global table.
In user exit when it comes I store some information. and again when it will come I will have that stored information so I can use it.
Thanks a lot in advance.You can use EXPORT TO MEMORY ID and IMPORT FROM MEMORY ID Statement for this.
EXPORT T_ITAB FROM T_ITAB TO MEMORY ID 'ABC'.
IMPORT T_ITAB TO T_ITAB FROM MEMORY ID 'ABC.' -
How can I delete an account, BUT only after having saved data
I need to delete my account from the iPhone BUT not before having saved the current data. How?
My Calendar, Contacts, Bookmarks sync is not working. As a solution, I was told to delete account from the iPhone, reset the iPhone, create my MobileMe account again on the iPhone and select Calendar, Contacts and Bookmarks to be synced using MobileMe.
Fine, but I get a warning that all the information that I currently have in Calendar, Contacts and Bookmarks on my iPhone will be lost!!!
That would be a problem, as I have entered a great number of new contacts on the iPhone, and I really don't want to lose them. Is there no way to MERGE without losing what's on the iPhone? Or can I save the Contacts and Calendar data somehow before I delete the account of the iPhone, so I can import them back later in a new account?
In a nutshell: I need to delete my account from the iPhone BUT not before having saved the current data. How?If the sync process is not working between your iPhone and the MobileMe "cloud", is it working properly between the Address Book and iCal on your Mac with the MobileMe "cloud"?
With a MM account, you can sync contacts and calendar events over the air, or direct with the supported applications on your compute via the iTunes sync process. You can do one or the other, not both at the same time. In order to sync direct with the supported applications on your computer via the iTunes sync process, you must turn Contacts and Calendars off for over the air syncing on your iPhone, which will remove all contacts and calendar events from your iPhone.
I'm afraid you will need to manually enter the new contacts with the Address Book, the new calendar events with iCal on your Mac.
There is an outside chance. Contacts and calendar events are included with your iPhone's backup. You can sync with iTunes to update your iPhone's backup before deleting your MM account on your iPhone - I suggest turning Contacts and Calendars off on your iPhone before deleting the account.
Follow deleting your MM account from your iPhone by restoring your iPhone with iTunes from your iPhone's backup. This should restore the contact and calendar events on your iPhone from your iPhone's backup. Follow this by syncing with the Address Book and iCal on your Mac.
There is a chance this won't work and if not, all contacts and calendar events on your iPhone will be lost in the process.
Message was edited by: Allan Sampson -
How can i open pdf files from the web without saving them
Windows 7
Firefox 5
Adobe Reader 9
when i want to see a web based pdf file i have to save it before opening it instead of it just opening in a pdf window.You can't.
Those PDFs are only accessible on the Mac.
They can not even be accessed by iOS. -
How can I disable Google Instant in Firefox 6 without saving cookies across sessions??
I'm currently using Firefox 3.6.22 & clear all history including cookies, etc. whenever I close Firefox. I can disable Google Instant by changing general.useragent.extra.firefox in about:config to Fx/3/6/22. When I tried Firefox 6, with the same history settings & config setting, Google Instant kept rearing its ugly head. Is there a setting in Firefox 6 that will allow me to disable Google Instant without having to set a preference each time I open Firefox 6?? I find Google Instant to be extremely annoying. Please help.
Thanks,
Steve W.[https://addons.mozilla.org/en-US/firefox/addon/switch-google-instant/ https://addons.mozilla.org/en-US/firefox/addon/switch-google-instant/] is a pretty good addon, which seems to address your problem.
-
Regarding how to find out a program is User Exit/executable
Hi,
Can anybody tell me how can we find wether a particular program is used in executable program (or) user exit program?
One thing we can find out is wether the program type is 'I' or 'R' etc..
Thanks in advance.
Thanks,
Deep.Hi...
See the following links..
it helps you a lot..
how can we C the USER_EXITS in Z programs
how can we find the list of user exits for a transaction
How to find the active user exits in my client
How to find user exits for a transaction
Hope it helps you...
Let me know if u have any more doubt...
Reward points if useful......
Suresh....... -
SNR License Issue. How Can I Disable SNR for all Users?
Hi,
I Have an issue with SNR on CUCM 10.5 and with assignement of license type
I have a cluster with 400 users.
200 users use ip phone 3905 and should be use an Essential License.
When system check for assignement of license type , itassign a Basic License instead of an Essential License, because it see that users have SNR Enabled.
All users in my system have SNR enabled, and I can not disable it. All my user have Enable Mobility unchecked, and all my phone have Device Mobility Off, but system however see SNR enable.
How can i disable SNR for all users? This is a feature that client don't need.
I dont' have a sufficent number of licenses for support all 3905 in Basic License.
thanks for help.
AndreaWell actually, Mobile Identity wouldn't apply to a 3905 unless those phones had another line on a Dual-Mode device like an iPhone or Android phone. So unless you have either of those in your system you can scratch that idea. Someone else may chime in here and try to help a bit more as RD/RDP are the main SNR culprits.
-
iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server. -
How can SAP be configured to prevent users from consuming locks?
How can SAP be configured to prevent users from consuming locks?
The issue is that we want to prevent users to use upto maximum locks and so that we will not get lock table overflow issue. I know that we can assign parameter "enque/table_size" a good amount of value. But it is not for any specific user.
Also want to alert in CCMS if any user reaches to its maximum speficified limit of locks.
Thanks
GopeshYou cannot set a limit of locks per user. There are two ways to reduce/control the number of locks:
- change fewer records within one transaction
- cover more records with one lock using wildcards
Basically it is an application / development issue.
Best regards, Michael -
How can i share documents with different users on the same mac?
How can i share documents with different users on the same mac?
Shared how? The other users can read the documents or you all can read and write the documents?
The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
The second is a bit trickier. -
How can I login and retrieve my user file from the trash?
I was trying to find out where all my HD had gone, which a did using ‘What Size’.
I found what looked like an old backup file so I put the file in the trash.
It turns out that the file was my user file. So now I can’t login to as the user.
How can I login and retrieve my user file from the trash?The Digital Editions forum is here, in case this is what you are talking about:
http://forums.adobe.com/community/adobe_digital_editions
If you are not, I apologize for the misunderstanding.
Maybe you are looking for
-
i have a mac 10.6 and use firefox 3.16. i have just downloaded an updated version 4.0 which is in the down load folder but the version i am still using is the previous one . how do i use the latest version. i am a new user of apple mac.
-
'column ambiguously defined' due to automatic addition of rowid to every JDBC calls
We are using Weblogic 6.0 spf 1 and Oracle as back end. When ever we fire an SQL using JDBC, Weblogic automatically adds 'rowid' to the select clause and fires the SQL. If Oralce returns the error 'ORA-00918: column ambiguously defined', the rowid is
-
A Problem When Converting SmartForm (OTF) to MS Word
Hi, i'm converting smartform to ms word file but design is spoiled. CALL FUNCTION 'CONVERT_OTF' EXPORTING format = 'ASCII' max_linewidth = 132 IMPORTING bin_filesize = gv_fsize * bin_file
-
Errors in display within last 24 hours
Hi there, Within the last 24 hours my muse design is showing multiple text errors and some elements are not in the correct position. I have not made any edits to result in these changes. It is worth noting that I updated my Mac this morning the lates
-
Zen Neeon - Stuck on charge screen and not recogniz
Hey there,Purchased my Zen Neeon only 20 days ago, but last night I left it hooked up to my computer, and turned my computer off. Today when I booted up, it said new USB device found, followed by unknown device, I looked at my Zen, and it was on the