How can I join 3 tables while extracting data from SAP R/3?

I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.

Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier.

Similar Messages

How to fill the table UD_SAPHR with data from SAP HR Connector

Hi, I`ve searched all the forrum but didn`t find how to map fields from connector form to the any field in OIM. I tryied with entity adapters but failed to reach any result. The problem is that I even cant put incoming data with connector to the table of the connector form (UD_SAPHR).
I will be grateful for any help. Below is the cut of the log. In few words - how to map, for example, field "Department=40000260" to the field in the USR table or UD_SAPHR table (or any other - to have this information in OIM).
OIM-9101Upd5, OS-Oracle Enterprise Linux4x64,SAP COnnector-SAP-ER90460, Database-Oracle 10gx64, Appication server-SOA(Oracle Application server)
INFO,01 Jul 2009 14:08:11,504,[XL_INTG.SAPHRMS],getDetailsForRecon(): *****************************
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getDetailsForRecon(): 00000017
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],reconcileEmp(): SAPUserRecon for SAP : SAP HRMS IT Resource:EmployeeId=00000017
DEBUG,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],SAPUserRecon:returnDate(): Employee Status***3
DEBUG,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],EmpStatus***3
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Recon key is 00000017
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Hash Key is USR_UDF_PERSONNEL_NUMBER
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Get UserId of user with reconKey: 00000017
INFO,01 Jul 2009 14:08:11,506,[XL_INTG.SAPHRMS],getUserId():hmFilter: {USR_UDF_PERSONNEL_NUMBER=00000017}
INFO,01 Jul 2009 14:08:11,540,[XL_INTG.SAPHRMS],Result set rs contains : Thor.API.tcMetaDataSet@790a37
INFO,01 Jul 2009 14:08:11,540,[XL_INTG.SAPHRMS],getUserId(): Xellerate RS Count*** 0
DEBUG,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): hmReturn ***{Create=0, UserLinked=0, userId=, UserKey=, XelUser=, Exist=0, User=}
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Recon key is 00000017
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Hash Key is USR_UDF_PERSONNEL_NUMBER
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Get UserId of user with reconKey: 00000017
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId():hmFilter: {USR_UDF_PERSONNEL_NUMBER=00000017}
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],Result set rs contains : Thor.API.tcMetaDataSet@282f10
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],getUserId(): Xellerate RS Count*** 0
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],getUserId(): hmReturn ***{Create=0, UserLinked=0, userId=, UserKey=, XelUser=, Exist=0, User=}
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],sEmployeeUserID***
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],UserKey***
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],EmpStatus fetch from target System is 3
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],EmpStatus Mentioned in Task scheduler is 3
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],reconcileEmp():sUser get from Resource Object Table ***
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],reconcileEmp():sXelUser get from Xellerate Table***
el Number=00000017, LinkedUserID=, Xellerate Type=End-User Administrator, First Name=п⌠п╣пҐпҐп╟пЄп╦п╧, Last Name=п■п╟п╡я▀пЄп╬п╡, Role=Consultant, Middle Name=FromHRMS=1}╣п╡п╦я┤, Userr
INFO,01 Jul 2009 14:08:11,571,[XL_INTG.SAPHRMS],Reconciliation of the user entered
DEBUG,01 Jul 2009 14:08:11,571,[XL_INTG.SAPHRMS],before create HR user reconciliation event***{PostalCode=, EndDate=9999/12/31 12:00:00 MSK, EmailAddress=, SSN=, State=, District=, TelephoneNumber=, Manager=, StartDate=1888/12/01 12:00:00 MSK, City=, EmplUserId=, UserLinked=0, UserLocked=0, FirstName=п⌠п╣пҐпҐп╟пЄп╦onnel Number=00000017, EmployeeId=00000017, Country=RU, Title=Mr, Department=40000260, MiddleName=п░пҐпЄя─п╣п╣п╡п╦я┤, LastName=п■п╟п╡я▀пЄп╬п╡}
INFO,01 Jul 2009 14:08:11,711,[XL_INTG.SAPHRMS],disableEnableXelUser(): Get UserKey of user with reconKey: 00000017 for SAP SAP HRMS IT Resource
DEBUG,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],disableEnableXelUser(): Xellerate RS Count*** 0
INFO,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],reconcileEmp(): User Reconciliation for Create & Modify User is completed.
INFO,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],reconcileEmp() **** DONE RECONCILIATION

That is my problem. I get only those fields, that are in the xellerate user standard form. And I need also fields "Department" and "City".
This information connector gets from SAP (as it is seen in log) but doesn`t save it anywhere inside the OIM, though such fields exists in the UD_SAPHR table (and correspondend form) but this table remains empty after reconciliation.
DEBUG,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],before create XL user reconciliation event***{Email=, Organization=Xellerate Users, User ID=00000072, Personnel Number=00000072, LinkedUserID=, Xellerate Type=End-User Administrator, First Name=п°пҐп╣, Last Name=п п╬п╪п©п╣пҐя│п╦я─я┐п╧п╨п╟, Role=Consultant, Middle NamomHRMS=1}
INFO,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],Reconciliation of the user entered
DEBUG,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],before create HR user reconciliation event***{PostalCode=, EndDate=9999/12/31 12:00:00 MSK, EmailAddress=, SSN=, State=, District=, TelephoneNumber=, Manager=, StartDate=1970/01/01 12:00:00 MSK, City=, EmplUserId=, UserLinked=0, UserLocked=0, FirstName=п°пҐп╣, Person Number=00000072, EmployeeId=00000072, Country=RU, Title=Mr, Department=40000240, MiddleName=п·я┌п©я┐я│п╨, LastName=п п╬п╪п©п╣пҐя│п╦я─я┐п╧п╨п╟}
Edited by: user6645106 on 03.07.2009 10:12

Regarding Extracting Data from SAP CRM

Hi,
1) What are steps to extract data fron SAP CRM? I heared that we get different types of errors while extracting data from SAP CRm to BW when compared to BW
2) From which tables BW system is getting data when we extract data from SAP CRM Lead management, Opportunities, Activities and CIC?
Can anybody please let me know the answers for these ..........
Thanks in Advance,
Sowji
[email protected]

Hi Sowjanya,
Pls ch this link:
regarding bw crm extraction
CRM extraction
CRM Extraction
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Steps:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Datasources used in CRM-BW extraction are:
0crm_sales_act_1,
0BBP_STSMA_TEXT
0CRMFOCST_TEXT
0CRM_ACCPLN_ATTR
0CRM_ACCPLN_TEXT
0CRM_BILL_BLCK_TEXT
0CRM_CANC_PARTY_TEX
0CRM_CANRSN_TEXT
0CRM_CATEGORY_ATTR
0CRM_CATEGORY_TEXT
0CRM_CLASS_TEXT
0CRM_DECOTP_TEXT
0CRM_DECO_TEXT
0CRM_DIRECT_TXT
0CRM_ECROPT_TEXT
0CRM_FINCLASS_TEXT
0CRM_ITM_OBJ_TYPE_T
0CRM_ITM_TYPE_TEXT
0CRM_JRGUID_TEXT
0CRM_OBJ_TYPE_TEXT
0CRM_OPGUID_TEXT
There many more!
Check the datasources in rsa6 of crm system under CRM node. Documentation is available in SAP help.
*pls search SDN For more info*
*pls assign points if info is useful*
Regards
CSM reddy

Time Out Dump while extracting data from table CKIS

Dear Friends,
I am getting TIme Out dump for the below code, while extracting data from table CKIS.
Table CKIS doesn't have any Indexes. Please guide me to resolve this.
Regards,
Viji.
form get_keko_ckis.
SELECT kalnr kalka kadky tvers bwvar matnr werks kokrs
         FROM keko
         INTO TABLE i_keko1
         FOR ALL ENTRIES IN i_final_modify
             WHERE matnr = i_final_modify-main_f
               AND werks = p_werks
               AND kokrs = p_kokrs
               AND kadat = p_kadat
               AND bidat = p_bidat
               AND bwdat = p_bwdat.
IF sy-subrc = 0.
    SORT i_keko1 BY kalnr kalka kadky tvers bwvar.
    SELECT kalnr kalka kadky tvers bwvar posnr typps kstar
           matnr menge gpreis
           FROM ckis
           INTO TABLE i_ckis_temp
           FOR ALL ENTRIES IN i_keko1
           WHERE kalnr = i_keko1-kalnr
             AND kalka = i_keko1-kalka
             AND kadky = i_keko1-kadky
             AND tvers = i_keko1-tvers
             AND bwvar = i_keko1-bwvar.
        IF sy-subrc = 0.
          SORT i_ckis_temp BY kalnr kalka kadky tvers bwvar.
          LOOP AT i_ckis_temp INTO wa_ckis_temp.
            wa_ckis-kalnr = wa_ckis_temp-kalnr.
            wa_ckis-kadky = wa_ckis_temp-kadky.
            wa_ckis-posnr = wa_ckis_temp-posnr.
            wa_ckis-typps = wa_ckis_temp-typps.
            wa_ckis-kstar = wa_ckis_temp-kstar.
            wa_ckis-matnr1 = wa_ckis_temp-matnr1.
            wa_ckis-menge = wa_ckis_temp-menge.
            wa_ckis-gpreis = wa_ckis_temp-gpreis.
          CLEAR wa_keko1.
          READ TABLE i_keko1 INTO wa_keko1
                             WITH KEY kalnr = wa_ckis_temp-kalnr
                                      kalka = wa_ckis_temp-kalka
                                      kadky = wa_ckis_temp-kadky
                                      tvers = wa_ckis_temp-tvers
                                      bwvar = wa_ckis_temp-bwvar
                                      BINARY SEARCH.
             IF sy-subrc = 0.
                wa_ckis-matnr = wa_keko1-matnr.
                wa_ckis-werks = wa_keko1-werks.
             ENDIF.
             APPEND wa_ckis TO i_ckis.
             CLEAR: wa_ckis_temp, wa_ckis.
          ENDLOOP.
        ENDIF.
    REFRESH: i_keko1, i_ckis_temp.
ENDIF.
endform.                    " get_keko_ckis

Hi Try minimising the conditions in where clause
     SELECT fields..... FROM CKIS
     WHERE KALNR = KEKO-KALNR AND
                  KADKY = KEKO-KADKY AND
                  TVERS = KEKO-TVERS AND
                  TYPPS = 'M'.
    after this, deleting unwanted records from internal table as per pending conditions...
Regds,
Anil

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

How to extract data from SAP in FDM 11121

I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

Error while extracting data from Generic datasource

Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
Sonu

Hello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

How to Extract Data from SAP and Load it into Essbase

Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thanks

hi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :)

How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

Hi,
How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

hi
good
both works not possible simultaneously.
If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
thanks
mrutyun^

How can we transfer huge amount of data from database server to xml format

hi guru
how can we transfer huge amount of data from database server to xml format.
regards
subhasis.

Create ABAP coding
At first we create the internal table TYPES and DATA definition, we want to fill with the XML data. I have declared the table "it_airplus" like the structure from XML file definition for a better overview, because it is a long XML Definition (see the XSD file in the sample ZIP container by airplus.com)
*the declaration
TYPES: BEGIN OF t_sum_vat_sum,
          a_rate(5),
          net_value(15),
          vat_value(15),
         END OF t_sum_vat_sum.
TYPES: BEGIN OF t_sum_total_sale,
        a_currency(3),
        net_total(15),
        vat_total(15),
        vat_sum TYPE REF TO t_sum_vat_sum,
       END OF t_sum_total_sale.
TYPES: BEGIN OF t_sum_total_bill,
        net_total(15),
        vat_total(15),
        vat_sum TYPE t_sum_vat_sum,
        add_ins_val(15),
        total_bill_amount(15),
       END OF t_sum_total_bill.TYPES: BEGIN OF t_ap_summary,
        a_num_inv_det(5),
        total_sale_values TYPE t_sum_total_sale,
        total_bill_values TYPE t_sum_total_bill,
       END OF t_ap_summary.TYPES: BEGIN OF t_ap,
        head    TYPE t_ap_head,
        details TYPE t_ap_details,
        summary TYPE t_ap_summary,
       END OF t_ap.DATA: it_airplus TYPE STANDARD TABLE OF t_ap
*call the transformation
CALL TRANSFORMATION ZFI_AIRPLUS
     SOURCE xml l_xml_x1
     RESULT xml_output = it_airplus
     .see the complete report: Read data from XML file via XSLT program
Create XSLT program
There are two options to create a XSLT program:
Tcode: SE80 -> create/choose packet -> right click on it | Create -> Others -> XSL Transformation
Tcode: XSLT_TOOL
For a quick overview you can watch at the SXSLTDEMO* programs.
In this example we already use the three XSLT options explained later.
As you can see we define a XSL and ASX (ABAP) tags to handle the ABAP and XML variables/tags. After "

Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.

Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./

Facing Issue while Extracting Data from Essbase using CalcScript

Hi All,
we are getting this error while extracting data from Essbase by CalcScript using ODI.
Does anyone have the answer
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5046.f$0(<string>:1)
     at org.python.pycode._pyx5046.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Hi Now i am getting this error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5054.f$0(<string>:1)
     at org.python.pycode._pyx5054.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

How to extract data from SAP and COBOL using ODI

Hi Folks,
Can you please let me know the procedures in ODI to extract data from SAP and COBOL?
Thank you all for the help.

Hi
You can download Patch 8571830 from Oracle metalink.
It has a new technology "SAP ABAP" and KMs to extract and load data -
RKM SAP ERP and LKM SAP ERP to Oracle.
Thanks

How can I join 3 tables while extracting data from SAP R/3?

Similar Messages

Maybe you are looking for