How can I join multiple clips in imovie-

I have uploaded them from a flip mino and when I burn to a dvd I want it to play like a DVD not stop each time the recorder was stopped.

atsan2 wrote:
… I believe I have to join the clips but it is not an option when I try to do it.
new Project
add clips from Event(s) to Project = 'joining'
export Project = one single video ...
the idea of a video-editor is .... editing:
joining, splitting, cutting, shortening, arranging, compositing, getting rid of unwanted, adding eye-candy ..........

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How do i join multiple clips into a single movie?

I imported various video clips from my device into imovie 09. I have move all my selected parts of all the clips into my project pane. How do I join all these seperate clips in the project pane into one single movie, and then save it as such??

i have used the share menu to save the movie under quicktime. This brings two more questions:
1. Is there not a way join the clips into one movie and save it with iMovie, rather than having to share it with another application?
2. If I do share it with quicktime, can i delete the original clips from iMovie, or will that also delete the new movie in quicktime?

How can I select multiple clips in the event browser?

I can't seem to figure out how to do something that should be pretty simple. I want to select multiple clips in the event browser that aren't next to each other. Right now it's only letting me select the two clips with every other clip in between. Is there a keyboard function that will allow me to deselect the clips in between while leaving the two on the outside selected? In Apple's finder you can do this with files by holding down shift-command while clicking on the ones you want. Or is there away to rearrange clips in the event browswer?
I'd like to be able to create a multicam clip, but there is always going to be other media in between the clips I want to combine, so how can I select only the clips I want?
Thanks!

Holding the Command key should let you select non-contiguous items, just as in the Finder.

How can I cut audio clips within iMovie?

This may be a simple solution but I just can't seem to figure it out. I would like to add audio (music) to just the beginning of my iMovie project. But whenever I drop a music file into the timeline, it stretches it all the way through the entire movie.
Also, I'd like to know how to only adjust my voice to certain clips of the movie, and not the whole entire timeline.

If you only want the sound clip for a set period of time, drag it on top of one of the video clips near the beginning that will prevent the audio from becoming a 'background music clip'. Grab the title bar of that clip in the Project window and drag it until the whole background area changes from purple/green to the normal dark grey color of the Project window. Same would apply to your voice clips as well, just drag those sound clips right on the very middle of the thumbnail image of the video clip, and then slide it around to where it needs to be by dragging it to the left or right.

How can I export individual clips from iMovie?

I have 250 clips, but I want to export them ALL as individual clips, and not as a movie. I have taken a lot of time to select these clips from many hours of video. And I now need to get these clips to a post-production person for editing. I wish to export them all as indivudual clips, and maintaining the original order.
I can only find the way to export either a single clip, or an entire movie.
Can anyone help me on this Thanksgiving morning??
THANKS!
Jim

sorry I should have been a bit clearer.
There are three sections I wish to export individually from the one sequence.
I worked out that I could export multiple sequences within the same project, which is fine... but the ability to export separate sections from one sequence would be very useful...
Cheers,
And thanks again for your help.

How can I replace multiple clips in my timeline w/ an edited version of their original source file

I have a single audio .wav file that I've already cut up and assembled in in my timeline. If I want to do a noise reduction for the full .wav file in Adobe Audition, is there a way to perform the noise reduction only once, on the original .wav file, and then ensure that the new "audio extracted" file replaces all of the related subclips in clips in my timeline? I'm trying to avoid performing the same noise reduction on multiple subclips, when they originally all came from the same file anyway. I also want to avoid the clutter of adding a bunch more "audio extracted" files to my media.
In the future, I'll probably need to change my workflow so that I perform the noise reduction first! But in the meantime, is there a clean/ simple way to retroactively do the edit, and replace the edited .wav file with it's respective subclips?
Thanks!
Alex

SAFEHARBOR11 wrote:
...turn off other audio tracks, export a .wav (takes seconds)
and do the Audition work on that and drop into timeline,
simple and clean.
This assumes that the .wav file in question
is only used by itself on its own audio track.
If there are other audio elements mixed on the track(s) along with
the .wav file the OP wants to treat with noise reduction, this method
will require "un-editing" the track(s) before you isolate for export.

How can I Join song?

I want to create a slide show and not have the music loop. How can i join multiple track so they appear as one and then put it in my slide show?

You use "Join CD Tracks" from the Advanced menu when you are importing. The function doesn't work after the tracks have been imported: Adding Songs from CDs to your Library
If want to edit and splice tracks together you can download the free open source program Audacity which has Linux, Mac and Windows versions at this link: Audacity

How to join multiple clips and music?

Hi. I have finish a project, but I want to include new music with news clips in the middle of it . How can I join the multiples clips and the music I have edited so far in order to move them in the timeline as is they were a single clip, that is, without broken them? Thank you

You can find the same issue in
Logic of queries in OBIEE
or
Connection between 2 fact tables
Follow the link
http://there-n-back-again.blogspot.com/2009/04/oracle-analytics-how-to-report-over-non.html
Put 'All' or 'Total' at levels for dim_xxx for those facts you need in your report from facta and factb
Regards
Nicolae

IMovie How do you join video clips that have been split

In Imovie project, How do I join video clips that been split

Hi
And if the clips are not contiguous - Then You have to do as in all versions of iMovie from the very beginning.
• Put the clips into one new project
• Export this as full quality QuickTime movie
• Import this new merged QT-clip into Your main project
This is a way around that are very basic and used whenever more elaborated scenes are prepared - e.g. multiple text clips or when in need of adding several functions into it.
Tedious - but it always been like this - in contrast to FinalCut.
Yours Bengt W

How can I pass multiple condition in where clause with the join table?

Hi:
I need to collect several inputs at run time, and query the record according to the input.
How can I pass multiple conditions in where clause with the join table?
Thanks in advance for any help.
Regards,
TD

If you are using SQL-Plus or Reports you can use lexical parameters like:
SELECT * FROM emp &condition;
When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
SELECT &columns FROM &tables &condition;
But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
Best of luck!

How can I separate a clip in an event in iMovie'08?

how can I separate a clip in an event in iMovie'08?

Hi iCat,
Can you provide some more information about your current implementation so that we can help to answer your questions. Some questions I have for you are:
Are you creating this project in the NI LabVIEW Web UI Builder or in LabVIEW?
How are you publishing your webservice? Is this also in LabVIEW?
How is your webservice interacting with an OPC-UA server?
How is the certification set up with OPC-UA so that you can communicate between the server and the client?
Best Regards,
Allison M.
Applications Engineer
National Instruments
ni.com/support

In imovie can you trim multiple clips at a time? Also, can you randomly sort the photos?

In imovie can you trim multiple clips at a time? Also, can you randomly sort the photos?

Can I do all at once or 1 at a time? It seems to only allow 1 at a time.
No. But you can do one, copy its settings, then seclect the rest and "Paste Audio Settings" to all of them all at once in a project.

How can i export video clips in iPhoto into iMovie?

how can i export video clips in iphoto into imovie?

Hello andrewmarkp,
As long as the videos are in a format that can be used by iMovie, they will appear in your Event Browser, under 'iPhoto Videos.'
iMovie '11: Use video from your iPhoto library
http://support.apple.com/kb/PH2196
If you’ve imported video from your digital camera into iPhoto, it appears automatically in your iMovie Event Library (as long as the video is in a compatible format).
To use iPhoto video in iMovie:
Click iPhoto Videos in the Event Library.
The videos appear in the Event browser on the right. You can select and use the video just as you would any other footage.
To learn about importing video into iPhoto, open iPhoto and choose Help > iPhoto Help.
Cheers,
Allen

How can i send multiple films from iMovie06HD to iDVD? ( iDVD gave me ****)

After 2 weeks of jerky videos, unexpected shutdowns, multiplex and buring errors i yesterday finally had something. Than i noticed, that the chapters didn't work. Allright, i thought, those 5-min chapter-marks are a mess anyway. I got myself iMovie06HD to finally set the markers myself.
My Problem: I have got four films to burn on that dvd. Each of which is about half an hour and i want them to be on that dvd as four single films with own chapter menues.
How can i send multiple films to iDVD from iMovie06HD? All i found was "only send selected clips" which i did but then my four single films arrive at iDVD as ONE whole film, with chapters yes - but there is no way to create a menu with four single films. I tried all i could imagine. I tried to solve the problem by creating four iMovie projects which will also create four corresponding iDVD projects. I tried to export the movies in multiple formats but then the chapter markers seem to be gone.
I have to admit i'm desperate. I hope i made my problem clear to you and somebody knows a solution. Thank you! Cheers, Matthias

Just drag and drop each iMovie project on to the iDVD menu - being careful to avoid any of the drop zones.

How can I join multiple clips in imovie-

Similar Messages

Maybe you are looking for