How can I jump from Safari window to Safari window?

Hey all,
How does one jump from one Safari window to another? While Im at it, also from Tab to Tab?
On Window to Window in WinXP, I would use Command/Tab. However, in OSX, if I Command/Tab, then I get a different program list other then available, open Safari windows.
When in a single Safari window and have multiple tabs, to go from Tab to Tab, in Windows, you use Control/Tab. But in OSX, this does not work. I have tried variations to see if I could figure it out, but have been unsuccessful. Many thanks for any help and input.
LH

Command + ` is a system-wide function to toggle between open windows within any running app. Works for everything.
In Safari 4 and 5, ShiftCommand (right or left) arrow moves tabs for me. I noticed that in Apple Discussions, should I have a "reply box" open, this copmmand will go to the that tab and stay there, highlighting text. Otherwise the combo wrks fine.

Similar Messages

How can I print from my windows 8 pc to my printer using my 2nd g express?

I have an hp deskjet 1055. It's just a USB printer how can I print from windows to my printer connected to my 2gen airport express? If it only works with airprint printers than why is there belkin routers that can work with any printer?

Figured it out. To print wirelessly via airport express 2nd generation you have to do some things. Download the bonjour printer thing mentioned above and have the printer plugged in to the airport express. Then run the bonjour printer thing and select your connected printer and install. Where I went wrong was I tried to print from my hp printer (1). When you install a printer with bonjour to print wirelessly it installs the same printer (2) so it's like there's 2 different printers in word or whatever you use to print. You have to select the one that says ready. Thanks for everyone's help

How can I stop from second window opening small in Safari and browser bar floating in and out like the dock?

Every so often I will click on a link in safari and it opens a second window. It opens it small. I can click the two diagonal arrow in the upper right hand corner and go to full view but then the browser bar at th top and all the Safari stuff like file, edit, view, history etc float up out of site. Much like the disappearing dock I can get it come back by going up by it. This is very frustrating. I have fixed it in the past but each time it is very difficult to find out how to do it. First why does this start happening? and if it does how can I get it to go back to the normal way? I will then bookmark the answer so I will be able to fix it quickly if it happens again.

I may not have called things the proper name. I am re-wording this now. Hopefully this makes it clearer.
Every so often,(3 times in 4 months), I will click on a web site and a new window will open much smaller than the standard window. I can enlarge the window by click the two arrows in the upper right hand corner but the menu bar disappears and reappears if you hover over it. I tried what some said above and when the window was small dragged it to the same size as the window under it, menu bars all visible. I closed that window and reopened it and it opened small again. I can go for several weeks and all additional windows open the correct size and with menus visible, then it goes into this mode. Everything running Lion 10.7.2 and Sarafi 5.1.1
I straightened it out one time or got it to stop doing that but don't remember how I did it. My husband fixed it the second time and he isn't around today. Anyone able to help?

HT2518 how can i transfer from my windows outlook .PST to apple mac probook

Hi
Happy new year. this karthik, i would like to know about the transfer from my windows outlook. PST to apple mac probook any mac OS version.
Regards
Karthik

Hi jlock76,
Thanks for using Apple Support Communities. This article has information on how you can transfer various media to your computer from your iPod:
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Cheers,
- Ari

How can I jump from a portlet to another one in other page?

Hi
I'm doing a tasks list porltet, when the user makes a click over a task, the user
has to see another porlet in other page. How can I activate a porlet residing
in other page?
Thanks for All

In all portal versions you need to add the pageLabel param to the URL and the application
automatically go the good page (for synthax look at the URL in the browser)
For exemple in portal 8.1 using the bea tags add the following link in the jsp
of the portlet one : go
to the second portlet page
You can also use a form instead just add the "_pageLabel" param to the form using
directly
an <input> tag not a <netui:param> tag that would prefix your parameter with the
current portlet instance label.
We did it for our project and it works.
"David Uribe" <[email protected]> wrote:
>
Hi
I'm doing a tasks list porltet, when the user makes a click over a task,
the user
has to see another porlet in other page. How can I activate a porlet
residing
in other page?
Thanks for All

How can I print from a Windows PC to an AppleTalk networked printer?

I have a Windows Dell laptop (NT w/SP 2) that normally prints on a Windows network at my office.
At home, I have an AppleTalk network that includes a cable modem, router, various Macs connected by either Ethernet or wireless, and an HP 2100TN printer connected to that router via Ethernet. My AirPort Extreme also connects to that hub, so the network is a combination of Ethernet wired and wireless devices. When I connect the Windows laptop to this network (either wirelessly or by Ethernet), it cannot find the printer (although I am able to get to the Internet). I've tried to install Bonjour (Bonjour64Setup.exe) on the Windows machine, but it refuses (comes back with a message saying that "Bonjour is not a valid Win32 application").
I am trying to find out how to get the Windows laptop to find and use the HP networked printer.

Thanks for the various suggestions (the successful one was the HP Wizard).
I couldn't find the IP address of the printer (the test page-- when printed directly from the printer-- does not show the IP address, nor does System Profiler), and the method used for the Airport Extreme USB printer was not necessary (although that may come in handy, some day).
I downloaded the HP Network Printer Wizard which made the whole process fairly easy and worked. The HP Wizard found the printer and got the printer up on the Windows printer list. It really didn't need for me to give it the IP address (it found it on its own).
Thanks.
--bbadon

How can I jump from scene to scene without settings being cleared

I'm making a Jeopardy game. When someone clicks on the button with the dollar amount on it, I have it reset to a different scene on the button so the players know it has been used. When another button is clicked, the first button resets back to its original dollar amount, rather than the blank scene it was reset to.
I'm not sure I'm wording the question very well, but I would appreciate any help you might have for me.
Thanks!

I did that here like this.
In each button i have this code on my main screen i have this
on(release) {
     indexscore = 100; (is the point value)
     cellnumber = 1; (i made the instance of each button "Cell" and then a number incrimenting....Cell1, Cell2.....
     gotoAndStop("Questions", 1);
Once it goes to the Questions scene that is where i click a button that will add the index number to my total points depending on if they clicked the button for team 1 or team 2... then that goes to my Answer scene which shows the right answers.....
This is the button that goes to the main screen from the answer scene
on(release) {
     gotoAndStop("Main Screen", 1);
     blankcell = "Cell"+cellnumber;
     setProperty(this.blankcell, _alpha, false);
i have blankcell declared at the beginning of the game as a global var
this code works so far but atm as soon as i try to have more than one button disapear it doesnt work, the problem i see is that im telling it to go back to that scene at frame 1, and that has all the buttons appear.....in other words it will make one disapear because its the button right before it but the frame with all the cells will override as soon as i try to get another button to dissapear.

How can i change from a windows os to a mac os on the ipod classic?

My Ipod classic is configured to a Windows OS. Now i have bought a Mac laptop. What do I need to do to change the Ipod to sync with the Mac?

Restore it on the Mac.
(59808)

How can I select from drop-down list and jumping to selected subform?

I using LC Designer ES2 vers 9. Developing XDP. How can I Select from a drop-down list the appropriate selected subform (jumping to the selected subform on the page)?
drop-down list...A (jump to subform1)
                         B (jump to subform2)
                         C (jump to subform3)
subform1
subform2
subform3
....end of form

Hi,
you cannot set focus on a subform but on a field, as only interactive objects can be focussed.
From a dropdowns exit event the script will look this way:
switch (this.rawValue) {
          case "A" : xfa.host.setFocus("form1.page2.field1"); break;
          case "B" : xfa.host.setFocus("form1.page2.field1"); break;

How can I switch between multiple windows of the same application (e.g. Safari) over several desktops ?

Hi All,
I have one application, for example safari, open and running with multiple windows (with or without tabs) spread over several desktops.
How can I switch between the windows only via keyboard? CMD+> and CMD+< let me only swicht between windows open on the one desktop I am currently looking at.
thanks for your replies,
equi

Barney,
many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
Unfortunately, moving the focus to the next window only works with windows on the same desktop.
btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
Thanks,
equi

How can I connect to a windows server from a mac book pro

How can I connect to a windows server from a mac book pre?

I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
Any help is greatly appeciated.

How Can I Print from my Microsoft Surface Running Windows 8 RT?

How Can I Print from my Microsoft Surface Running Windows 8 RT?
Most new wireless printers won’t have a problem printing from the Microsoft Surface with Windows 8 RT. All you should have to do for these printers is tell them to print and they will. Older wireless, Ethernet, and USB printers might not have an officially supported driver in Windows 8 RT, but there is a way to get the printers working. There are different requirements depending on how the printer is being connected to the Surface.
Note: All steps below are only for PhotoSmart, OfficeJet, DeskJet, and other HP Inkjet printers. These steps are not for Laserjet printers or printers from other manufacturers. These steps may not work for all Inkjet printers. If these steps don’t work, try different drivers from the list until you find one that will work (you’ll understand what I mean once you follow the steps below). If none of the drivers work, your printer will not work with the Surface.
For networked printers (wireless or Ethernet), all you need is either the Surface keyboard, or an external USB keyboard to connect to the Surface. This just makes anything you have to type easier to type. You will also need to have the Surface and the printer connected to the same network.
Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
Touch Search.
Below the Search Box, touch Settings.
In the search Box, type Devices and Printers.
Touch Devices and Printers.
Touch Add a Printer.
Touch “My printer is not listed”.
Select the TCP/IP option and touch Next.
Enter the printer’s IP address and touch Next. Note: You can get this from the printer’s Network Configuration Page, or from your router’s DHCP list.
The Surface will locate the printer and try to install it. The install will fail and the Surface will ask you what you want to do, search the internet for the driver, or manually install the driver. Choose to install the driver yourself.
Touch “I want to choose from a list of drivers”.
If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
Choose HP from the Manufacture list.
Choose DeskJet PCL 3 Class Driver from the Drivers list. If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver. (Thank you JonW for letting me know about these other alternates. )
Touch Next.
Touch Finish.
Test printing.
For USB connected printers, you will need a USB cord to attach the printer to the computer.
Connect the printer to the computer via USB.
Windows will try to find the drivers but will not be able to.
Here Windows may ask you if you want to choose the driver to install. If it does skip to step 14 below.
Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
Touch Search.
Under the Search box, touch Settings.
In the Search box, type Device Manager.
Touch Device Manager.
Touch View and select Show Hidden.
Search for the printer in the Device Manager. It should be under Other Devices with a yellow caution sign beside it.
Select the printer from the list.
Touch Action.
Touch Update Driver, or Install whichever one it displays.
The Surface will ask you what you want to do, search the internet for the driver, or manually install the driver. Choose to install the driver yourself.
Touch “I want to choose from a list of drivers”.
If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
Choose HP from the Manufacture list.
Choose DeskJet PCL 3 Class Driver from the Drivers list. If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver. (Thank you JonW for letting me know about these other alternates. )
Touch Next.
Touch Finish.
Test printing.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.

Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Window vs view - how can i jump to a view which was previously created?

Hello!
how can i jump to a view previously created without the push or pop to view function?
I have a UITabBarController with several view(s) (controllers)* and in one of my views i am using a navigation controller which pushes to various views. At the end, i would like to have a button, where the user can go back to its initial view (when the application is starting) i guess, that it has something to do with the rootview Controller.. the problem is: i dont have a root view controller because i am working with the TabBar example from apple, which is using the IB.
thx for any hints..
alex
*which still is not working.. availiable at http://www.learnclip.com/iphone_tutorials/ViewPusher.zip

You know what, about 30 seconds ago I figured out what I did. I set the Quiz preferences to “Required to pass before continuing” instead of “Required to take quiz”.
I am sure Action Script is the wrong term (I’ve only used Captivate for 2 weeks). I applied an Advanced action to skip over the knowledge checks. I got the tutorial from this link:
http://blogs.adobe.com/captivate/2011/07/excluding-knowledge-check-questions-when-reviewin gretaking-the-quiz.html
Thanks for replying!
Tiffany Robinson│Instructional Designer│Design and Development Team
Email: [email protected]<mailto:[email protected]> │ Phone: 386-218-3577
Check out thousands of free books and reports from Books 24x7 in the Kelly Learning Center!
Kelly Services, Inc.

HT202879 I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Office for Mac, http://www.microsoft.com/mac/products, can open/edit/create Office documents.If your external drive is formatted NTFS then you can copy the Office documents to your computer and work on them. You won't be able to save the files back to your NTFS formatted drive. But you will be able to save the documents to your internal drive. You can move all the external files to your internal drive then format the external drive for Apple. Then you can copy the files back to your external drive for ongoing use.

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Is Apple compatible with Microsoft Office?
Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
How can I transport from Windows to Mac?
You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

How can I jump from Safari window to Safari window?

Similar Messages

Maybe you are looking for