How can I keep multiple tabs to reopen when I relaunch browser?

I just downloaded Firefox 8.0. NOW I cannot reopen my browser with the 8 or so tabs like I used to do previously? Please suggest if this is possilbe. Thanks.

Hi - it still did not contain a precise response to my problem. But then I wandered around some more in the Tools option and found "always show the tab bar". I unchecked that, and it seems that for now all the tabs are gone. Shall have to see if they return on restarting or rebooting. If so, will post back. Thanks.

Similar Messages

  • How can i keep multiple tabs in the tab strip without them compressing into one tab?

    when i open more than 6 windows , they all compress into one tab from where i have to access pages with a drop down menu. i want all the tabs to open up and the individual tabs to appear separately on the tab strip which can be scrolled up or down. thank you

    hi
    the problem is in the firefox tab strip at the bottom of the page. i have attached two screenshots . when i open more than 6 tabs, they all get compressed into 1 tab. i want all tabs to stay open individually, and the tab strip should therefore have a page scroller icon forming when many tabs open. i have had this in the earlier computer i had, but recently got a new one. now i cant figure how to set firefox to do what i need.
    thanks

  • How can I keep emails and read later when off line please

    How can I keep email to read later when off line please

    I'm not sure how it works on your iPad, but once the email has been downloaded onto my iPad, I can read them even in Airplane mode with WiFi disabled. I don't see the images that are in the emails, but I can read the messages. I have one POP account and three IMAP accounts and it works for all four accounts.

  • How do I keep multiple tabs from loading all at once when I open Firefox?

    How do I prevent multiple tabs from loading every time I access Firefox? These are open tabs, but I do not want them to open simultaneously every time I want to open a new tab. Then I have to minimize each one in order to access other applications on my desktop. Please advise.

    Tools > Options -> General - Startup = select what you want Firefox to do on startup there
    '''Blank Page''' or '''Homepage''' ''(as long as those pages aren't all your Homepages)'' are alternatives to '''''windows and tabs from last time'''''
    Or as Vivek.Wilfred mentioned, upgrade to Firefox 8.0.1 where you have abother option - Don't load tabs until selected.

  • How can I keep a playlist on phone when syncing with new computer?

    When syncing my IPhone I am prompted with an ominous message that says "Are you sure you want to remove the existing music ... from this phone and sync with this ITunes library? Music .... will be removed and items will be synced from this ITunes library" The answer is no because I have a playlist I would like to keep on the phone, but add one which resides on the computer I am attempting to sync with. That is not an choice presented, the choices are Cancel or Remove and Sync. Apple should either give more options or at least a better explanation. I have synced this phone and computer combination before but have since created a new playlist in the computer (a Mac Mini).
    So how can I keep a playlist on the phone and add one from the computer too? Is it possible to view the phone as a drive and move items around in that manner? I use ITunes on both Windows and Mac platforms but this issue has always been problem for me. I also have IPhone 3 (used as an IPod), IPhone 4S and Iphone 5.

    Unless you can get the iPod backup file (and restore the iPod from that file on your new computer) from the "dead" computer you will lose all the app data you can export via email.
    - Yu can trabsfer iTnes purchases from the iPod by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - You can transfer non-itunes purchased music to the new computer by using one of the third-party programs discussed in this previous discussion.
    Best iPod to PC
    - After you move the stuff to the new computer, either restore the iPod from the backup, or if no backup, restore to factory defaults,new iPod and sync.

  • How can I stop multiple tabs from opening along with Mozilla Firefox Start Page at launching time.How can this be stopped?

    Whenever I launch Firefox, multiple tabs also start to open along with the Mozilla Firefox Start Page, which is very irritating. How can I stop this to happen each time I launch the browser?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved
    It is also possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • Can I open multiple tabs in Firefox when WINDOWS starts up? Command line limits to about 204 characters...

    I know how to configure Firefox so that it opens multiple tabs every time you open ''Firefox''. I want it to open multiple tabs when I start ''Windows''. Or in other words, I don't want to connect to multiple web pages every time I open a browser, just the first time I log on for the day.
    I tried appending the web sites in the command line of a Firefox shortcut in my Windows Startup folder. The problem is that in this approach, you're limited to as many URL's as you can type in about 204 characters ('C:\Program Files (x86)\Mozilla Firefox\firefox.exe' uses up 52 of the 256 characters available in a shortcut).
    Is there a way to open more tabbed web sites than that?
    What would be cool is if there was something like a FFstartup.ini file or something, where you could provide a list of websites as long as you want, and it would open them all. So, the command line would look like:
    'C:\Program Files (x86)\Mozilla Firefox\firefox.exe' 'C:\Program Files (x86)\Mozilla Firefox\FFstartup.ini'
    ...and the FFstartup.ini file would look like:
    [Startup]
    'http://www.yahoo.com'
    'http://www.google.com'
    'http://www.firefox.com'
    etc...
    If there's no current way to do this, how would I make this suggestion to be developed?
    Thank you!

    Use a .bat or .cmd file to start Firefox if you need more space than the target line in a shortcut allows.<br />
    Separate the URLs with spaces.
    start "" "C:\Program Files\Mozilla Firefox\firefox.exe" http://www.yahoo.com http://www.google.com http://www.firefox.com
    * https://developer.mozilla.org/en/Command_Line_Options

  • How can I keep a state machine readable when using large amounts of in/outputs

    Hello, I am new to Labview,
    Read trough the fundamentals and the
    getting started and a lot of examples.
    What I want to do is use a standard
    state machine from the template, and add some stages, for example
    orange, apple, banana. At this point I can use numeric controls to
    put in the amount of oranges, apples, bananas there are. I can even
    use a led to tell the user which state of the state-machine is
    active.
    The thing is there will be more numeric
    controls and more leds and it would be nice if the code would still
    be readable when there are 20 inputs and 20 outputs.
    Questions
    (1) It would be nice if I could use the
    typedef to select the right state AND the corresponding numeric
    controls and leds out of a cluster or an array kind of structure to
    keep the number of wires low. Is this possible, how can I do this?
    (2) I tried to put the numeric controls
    into a cluster but that way I can't put the numeric control for the
    apples in the upper right corner and the numeric control for the
    oranges in the lower left down corner of the front panel.
    (3) An example would be really nice, I
    know that I saw some examples describing this problem but there are
    so many examples that after a few hours of searching I haven't found
    the right one yet.
    Thanks in advance for the effort.
    p.s. I will not use Labview to do
    calculations on fruit, I am only using this to make the question
    easier to understand.

    I can only start a proper answer but I might as well start with that.
    When I am developing State Machines I have to think about what data is used and manipulated in each state. I then have to think about where am i going to keep and manage the data. I list all of the fields that are "touched" in each state and what values are used together and which are independent form the others. After this phase of the analysis, I usually have some data structure defined (cluser array etc).
    Then I flipp from thinking about the state to thinking about the data (after all this is LabVIEW and the data-flow paradigm is critical). If I see data that is only used by the State machine and is used in many of the states, then the data structure get put in a shift-register for easy access in each state. This maybe enough of an answer for your fruity question.
    When i see data that is shared or only used in a handful of states then I concider putting the data in an Action Engine. Depending on how you design your AE, you can access each of the fruit totoal by name or increment etc as required.
    If your app demands many fileds that are all related (can't be broken into distinct data structures) then create a cluster that has all of your values that are used by the AE. Then create an Wrapper VI for each call of the AE but only put the associated fields on the FP of the wrapper and then bundle that value into the cluster and invoke the AE.
    Ben
    PS: Sorry about reverting to neBulus mode but this topic could take days to cover in detail.
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can I get all tabs to close when I sign out

    Tabs fill the whole upper portion of the screen. I do not need them. I want to find out how I can automatically close all tabs whenever I leave Firefox.

    Hi - it still did not contain a precise response to my problem. But then I wandered around some more in the Tools option and found "always show the tab bar". I unchecked that, and it seems that for now all the tabs are gone. Shall have to see if they return on restarting or rebooting. If so, will post back. Thanks.

  • On Illustrator CS6 (Mac OS) how can I keep an open file minimized when opening other files?

    I work with several files at a time and it can become annoying when you open several files and a minimized file keeps opening after each one.  I don't want to have it open in the background, I just want it to stay minimized until I'm ready to work with it.
    Thanks in advance

    Hi Lytle,
    Let me clarify few more things here. There is an option Window>Arrange>Float in Window / Float All in Windows. You can use this option to float all your documents i.e. make them in separate document window. Now you can minimize these individual windows. But, when you open any more document your last active document window will come into focus. To avoid disturbing minimized state of other documents you can keep a blank document floating and before opening any document make it active and then open any new document. This is a kind of workaround to get rid of this issue.
    Hope it helps!
    Thanks!
    Dhirendra

  • How can I distinguish multiple tabs of the same site in the tab bar?

    Hello,
    I've been following some massive open online courses (MOOCs) and its been necessary to have several tabs open at the same time for the same site. I would like to be able to distinguish these tabs by being able to put a tag instead of the site url ('instructions', 'template', 'code', 'scratch', 'docs' etc. etc) and/or a colour code.
    Does anyone know if and how this can be done?
    Many thanks

    This one colors tabs, but the author warns that it doesn't work with other tab-related extensions, so you probably need to keep searching for one that does everything you want:
    https://addons.mozilla.org/en-US/firefox/addon/colorfultabs/
    If you don't find a do-it-all extension, you can modify the tab titles with a userscript that is specific to that website. This is because the tab displays the text designated in the page as its title.
    You either could "hard code" the list of words for each of the pages, or you could have a script extract information from the page, for example, the first main heading, or some other predictable bit of data. The script then would insert your preferred wording as the title of the page and Firefox will show that on the tab.
    To see how that appears, so you know whether it would be useful, you could do this experiment:
    On a web page that has useless tab text, open the Web Console using command+alt+k (Windows: Ctrl+Shift+k). In the line at the bottom next to the caret, paste the following code and press Enter:
    document.title="Magic!";
    If you decide you want a script written for this, you could try the request forum on userscripts''.''org:
    [http://userscripts.org/forums/2 Ideas and script requests - Userscripts.org]
    Although some people offer small payments, that usually isn't necessary to motivate people to help.
    Let me give you a brief warning about that site, though: over the past year, a lot of popular scripts were duplicated and reposted with additional code that hijacks your Facebook account. Be cautious when installing scripts, check the reviews, make sure there are no references to Facebook.

  • How can I save multiple tabs to open at the same time?

    Hi,
    I have a set of websites that I need to access regularly and I'd like to be able to open all the tabs in a window at the same time rather than clicking on each one individually.  I know this was possible in previous safari versions but I can't figure out how to do it in Yosemite (v8).
    Can someone walk me through how to do this please?  I've googled this but haven't been able to find an answer for this latest version of safari.
    Thanks!

    Try one of these extensions for multiple cookie sessions.
    Multifox: <br />
    http://br.mozdev.org/multifox/ <br />
    Cookie Swap extension: <br />
    https://addons.mozilla.org/firefox/3255/ <br />
    Cookie Pie extension: <br />
    http://www.nektra.com/oss/firefox/extensions/cookiepie/

  • How can I keep window tabs after reboot in Mavericks?

    Upon each reboot I find I need to reconstruct all Finder window tabs. Is there a way to keep/restore Finder window tabs after a reboot in Mavericks?

    hi
    the problem is in the firefox tab strip at the bottom of the page. i have attached two screenshots . when i open more than 6 tabs, they all get compressed into 1 tab. i want all tabs to stay open individually, and the tab strip should therefore have a page scroller icon forming when many tabs open. i have had this in the earlier computer i had, but recently got a new one. now i cant figure how to set firefox to do what i need.
    thanks

  • How do I keep multiple tabs open in Firefox?

    When using Firefox if I am working in a session under one tab and need to open up a different browser, I use the "+" to add another tab and open up a different session.  When I go back to the first tab to work, it closes the session on me and I have to log back in again.  This is so frustrating!  Is this a Firefox thing or did I turn something off on my mac?  I am not a computer geek so I apologize if my lingo jives.

    Well I'm assuming here you have your OS X 10.6 fully Software Updated and Firefox is at the latest version.
    https://www.mozilla.org/en-US/firefox/fx/
    macarooni wrote:
    When I go back to the first tab to work, it closes the session on me and I have to log back in again.
    This might be a security issue with the site your logged into, to prevent cross site scripting/hijacking etc. depending upon the site.
    I  suggest you delete all your installed add-ons, delete Firefox and reinstall FF and it's add-ons for security reasons.
    The latest version of FF is 6.01 and removes the compromised Diginor Certificate domain that might be causing your issue with the logged in site.
    In your Keychain program in OS X, under the preferences set the certificates to Best Attempt, Best Attempt, OCSP and reboot this will enable constant checks for compromised certificates upon each SSL visit.
    Naturally Apple and Microsoft are late to the party in updating their certificates.

  • How can I keep my screen captures sharp when exporting to PDF?

    I've tried using a screen capture tool that allows me to snag in the exact size, plus I changed downsampling to none in the export settings, but the screen captures still look blurry in the PDF. What else can I do to keep them looking sharp?
    My client insists on using InDesign to lay out this presentation and wants a sharp looking PDF to send to clients.

    Ok, there's the problem. You turned off effective compression of the photos.
    I don't know how, or whether, you can have different compression for different image classes in InDesign. That's really a question for an InDesign forum.
    Good luck!

Maybe you are looking for