How can I keep my screen clean?

How can I keep my screen clean? What can use to clean it?

May depend on the screen.
A CRT usually has a glass cover. Twenty years infront with a periodic careful spray of Windex works for me.
Laptops are another matter. Best bet is to go by the product manual.
However, having said that, my 30 plus years of nautical experience led me to use WD 40. Of course I was boating long before I owned my first computer. Thus when one of the boating mags recommended using WD 40 and a soft cloth on my marine electronics, e.g., radar, loran, radios, gages, etc., keyboard and screens, it worked so well that I also used it on my laptops' screens and keyboards (at home and on the boat)
Just my experience. Not for all.

Similar Messages

How can I keep my screen captures sharp when exporting to PDF?

I've tried using a screen capture tool that allows me to snag in the exact size, plus I changed downsampling to none in the export settings, but the screen captures still look blurry in the PDF. What else can I do to keep them looking sharp?
My client insists on using InDesign to lay out this presentation and wants a sharp looking PDF to send to clients.

Ok, there's the problem. You turned off effective compression of the photos.
I don't know how, or whether, you can have different compression for different image classes in InDesign. That's really a question for an InDesign forum.
Good luck!

How can i keep the screen from dimming when reading sth.?

as above

Screen dimming is an operating system function; I'm not sure if any program can actually disable that.

How can I take a screen shot on the iPad Air and keep the resolution at 2048 x 1536. For some reason when I'm in an app it reduces the resolution

How can I take a screen shot on the iPad Air and keep the resolution at 2048 x 1536. For some reason when I'm in an app it reduces the resolution

Tatanka11 wrote:
I'm new to Mac,...
Then... You may find these Links of Interest and Value...
Show me how to set up my Mac.
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
http://www.apple.com/findouthow/mac/
Enjoy your Mac...

When i plug my phone into the mac it shows me my screen and the apps on it, how can i keep these apps on my computer?

when i plug my phone into the mac i can see all of my mobile apps on an immitation of my iphone screen, how can i keep these apps in my itunes libraby on my mac as only a few are showing?

Ensure that you computer is authorized for all Apple IDs used to purchase the apps i(n iTunes Store>Authorize This Computer), then connect your phone to your computer, open iTunes and go to File>Devices>Transfer Purchases.

How can I keep My 2 email accounts and all other using HTML? It only lasts temporarily, i.e. for the day...

(1) - when I open Firefox I recently have clicked on the hyperlink for HTML at the bottom of page, it works great for my gmail and yahoo accounts. However, it is not a permanent fix, as it apparently lasts just for the daily session. How can I keep my internet, et al. HTML permanently?
(2) - Firefox v24.0 is said to be fast and faster! However, I am not finding it so. when I click on a link or open a tab, it is frustrating as the tab labors too long to open...I more than not click on reload, which appears to help somewhat. Any suggestions?
(3) - I've just printed out the Mozilla Support Q&A on the error message from Firefox stating that it cannot load the website...how to I remedy this, as it occurs constantly with my Yahoo mail login?
(4) Finally, several weeks ago I inadvertently popped the "HEALTH" Bookmark (I have a Bookmarks Toolbar), which is excellent (had it with WinXP also, now with Win7), but I seem to pop, double click, or something or other, that makes a bookmark folder jump into the wild blue yonder! I've posted for answers here and elsewhere, printed out and read all variable instructions to navigate and locate, all to no avail. More sage advice please?
with appreciation and, thanks in advance.

For #1, is the link to use HTML to simplify the interface?
It may be that the site stores your preference in a cookie, and you might have set Firefox to delete the cookie when you exit the browser. There are a few built-in ways to do this:
* Set Firefox to "Keep [cookies] until: I close Firefox" on the Privacy Options (you can create an exception for your mail sites)
* Set Firefox to "Clear history when Firefox closes" on the Privacy Options
* Use a private browsing window to visit your mail site
It's also possible that add-ons or external software may clean out cookies, or that there is a problem with the database file Firefox uses the store cookies.
For #2, did this problem just start recently? Do you notice any relationship with the type of site content (e.g., pages that use Flash or other media)?

How can I keep a photo image from fading away on my tv using apple tv.

How can I keep a photo image from fading away on my tv using apple tv?

Thanks for you reply. When I paint, I bring up the photo as you suggested. I begin painting. After about 10 minutes or so, the photo goes blank. And, I have to start the process over again to get that same photo. It interrupts the painting process. I think it goes blank due to a sleep function. I have gone into the Apple TV settings and turned off the sleep function. But, this does not seem to work. What can I do to keep the image on the TV screen permanently?

Using Numbers, I set up a spreadsheet grid but it disappears as soon as I click anywhere. How can I keep the grid?

Using Numbers, I set up a spreadsheet grid but it disappears as soon as I click anywhere. How can I keep the grid?
I have: iMac with OS 10.10.3; Numbers 08 ver 1.0.3

Hi Bernard,
This may help. Numbers tables can have Grid Lines (Format Panel > Table > Grid Lines)...
... and Cell Borders (to change all cells, select the whole table by clicking on the "bullseye" top left) then Format Panel > Cell > Border > select a Border Pattern and Style
1 pt Borders (my preferred default):
They don't disappear when I click away. Also, the borders show up well when I post a screen shot to this forum .
Regards,
Ian.

How can I keep my old software?

Hi, I'm planning to clean install my mac, but how can I keep my software that is already in there? Because I do not have the cd to reinstall it after the clean install.

GMS ny wrote:
But, I'm planning to erase all my hardisk, for security. Because i've been using my mac (leopard) for several years without any update. So I'm afraid that there are virus, bugs, worms, etc in my hard drive.
Unless you kept the original installer packages or can download or use the installer disks again, there is no way to save all the programs as those might be infected too.
Preferably it's best to maintain bootable clones on separate drives to restore a older system and software you can't get anymore.
Most commonly used backup methods

Sidebar ... how can i keep sidebar on at all times instead of going to view and clicking on side bar?

How can i keep the sidebar in view instead of going to view and cliking on side bar?

Found the Solution to my problem. Just had to put cursor on the corners of the open window and "stretch" the window to the left, to the right, then up only to the point of the screen where the "Menu" is still visible. This solved the problem I had. Thanks.

HT1473 i've been trying to import a cd into itunes that has different artists on the cd. (queen of the damned soundtrack) after its done, all the tracks aren't together. its all sepreated. how can i keep all the tracks together?i've been trying to import

i've been trying to import a cd into itunes that has different artists on the cd. (queen of the damned soundtrack) after its done, all the tracks aren't together. its all sepreated. how can i keep all the tracks together?

Happens all the time and you are probably correct about cause.
Some CD manufacturers use various forms of copy protection on discs designed to interfere with computers reading the discs. I have found iTunes to be very picky about this too. I have had several discs iTunes would not acknowledge but could rip with another program. Other times the fix is as simple as cleaning the disc ro turning on error correction for the ripping process.
Message was edited by: camoracer

How can we debug the screen pop up?

How can we debug the screen pop up?

Hi,
if you know where the popup is raised it is easy of course as you just have to uses F6 to keep the debug mode running.
But there is a way to get the popup into debug mode similar to typing /h into the ok code field of a sandard dynpro. Therefore you have to do the following steps:
1) click the "Create a Shortcut" button in the gui to get a shortcut on your desktop (the button next to new session)
2) in the oped screen for shortcut setting choose:
     type -> system command
     command -> /h
     depending on gui release you have to enter a system ID -> use the one of your system and parameters -> just type abc
3) press finish to create the shortcut
If you have done this you can drag and drop the shortcut from the desktop to a sap session or popup to switch on the debug mode. One shortcut works for all systems you have, the system id in it does not matter.
Oh, while I often have the case that I forget to resize the window before the popup appears so i cannot access the shortcut directly on the desktop, just remeber that you can always open a small file explorer window go to the desktop folder and drag it from there ;o)
Best Regards
Roman

HT201320 How can i keep my email accounts separate on my ipad like they were b4 latest update?

I just installed ios7 now all my incoming email comes in together- how can i keep them separate- i have 2 email accounts?

Edit : your reply applied whilst I was typing this
This is what I see (I've removed my account names) :
And after tapping the Edit button :
If you aren't getting that then you could try closing the Mail app via the multitasking bar - press the home button to go back to the iPad's homescreen ; double-click the home button to the multitasking list ; swipe or drag the Mail app from there up and off the top of the screen ; click the home button to close the bar. Then see what shows in the Mail app
Message was edited by: King_Penguin

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

How can I keep my batery longer?

How can I keep my battery longer?

None of the suggestions thus far have a significant affect on battery life.
Screen brightness on Automatic is the best setting, as it provides only as much brightness as you need.
WiFi uses ZERO power when the phone is on Standby, and minimal power when the phone is active. But if you are within range of a WiFi hotspot WiFi will use less power than Cellular data. So unless you have the phone actively being used for hours at a time the WiFi setting will make no difference.
3G off will save some power in light use because GPRS uses less power but is MUCH slower. So if you are transferring a lot of data turning 3G off will actually use more power, since transfers will take 3-4 times as long and the difference in power consumption between 3G and GPRS is only 2 times.
Bluetooth uses no significant power unless you are actively using a Bluetooth device, and then you would clearly want it on. BT runs at 3 milliwatts, hardly enough to matter.
If you did all of the suggested things you might get an extra few minutes a day.
If your phone is using a lot of power there are only 2 possible causes - Interactive games, and large data transfers. Nothing else on the phone comes close these two uses. FIRST you should determine if your power use is within spec for your paticular usage pattern. It probably is, but you can work it out for yourself by comparing your usage to the specs for the phone: http://www.apple.com/iphone/specs.html

How can I keep my screen clean?

Similar Messages

Maybe you are looking for