How can I keep overlay image on 8 bit image at video acqusition​?

Hi, I am using AVT camera Pike with Laview vision 2012
When I use Example code 'Grab and Attributes Setup.vi' (<NI supported Example),
I simply add the event case for overlay function (such as 'IMAQ Overlay Oval') with Image  by Local Variables connection (image input - output).
Event case:
             Image------[IMAQ Overlay Oval]--------Image
             Rectangle Control ---|
IMAQ Overlay should keep the overlay on buffer memory if I input the rectangle value.
Problem is that the overlay disappeared if I use 8 bit image format?.
but at the 16bit image format, the image keep the overlay image (colored overlay).
It seems the overlay buffer is removed by acquiring new 8 bit image, but 16 bit format, the overlay is still alive. 
Is it bug or what am I wrong?  

upload the error situation block diagram
Attachments:
8bit overlay error1.jpg ‏364 KB

Similar Messages

  • How can I keep a photo image from fading away on my tv using apple tv.

    How can I keep a photo image from fading away on my tv using apple tv?

    Thanks for you reply.  When I paint, I bring up the photo as you suggested.  I begin painting.  After about 10 minutes or so, the photo goes blank.  And, I have to start the process over again to get that same photo.  It interrupts the painting process.  I think it goes blank due to a sleep function.  I have gone into the Apple TV settings and turned off the sleep function.  But, this does not seem to work.  What can I do to keep the image on the TV screen permanently?

  • How can I keep people from saving images from my website?

    How can I keep people from saving images from my website?

    Hi,
    have a look at this thread
    http://discussions.apple.com/thread.jspa?messageID=5645821&tstart=0#5645821
    and the link I posted in that thread
    However there's no way to avoid that people grab photos from your website. Nevertheless there are ways for making it a little more difficult.
    Regards,
    Cédric

  • How can I find out the dpi of an image in Acrobat.

    How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

    Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
    That opens a panel on the right.
    To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
    Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

  • Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

    Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
    Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
    Thanks for any suggestions.

    I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
    Now I am back on my Mac. I meant the following:  Batch Change the date for a large range of photos, that should have a date stepped in increments.
    Select all Photos at once and use the command "Photos > Batch Change".
    Then set the date for the first photo and select an increment, e.g. one minute.
    Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date.  This way it will be unnecessary to change the titles or filenames.

  • I plan to loan my iPod Touch to a friend for one month to use in Europe.  How can I keep my iTunes account private, but enable him to create his own iTunes account to use on my iPod Touch?

    I plan to loan my iPod Touch to a friend here in the USA for one month to use on his trip to Europe.  How can I keep my iTunes content and my account private, but enable him to create his own iTunes account to use on my iPod Touch?  Also, do I need to de-register my iPod Touch for all of this to happen--and have him register my iPod Touch in his name for that month he is using it in Europe?

    very_nice wrote:
    The suggested advice in this support article http://support.apple.com/kb/HT1478 wasn't a help at all, because the option "enable disc use" in the summary window of itunes doesn't appear.
    *From the article*:
    Products Affected
    iTunes 7 for Mac, iTunes 7 for Windows, iPod nano, iPod shuffle, iPod mini, iPod, iTunes 8 for >Windows, iTunes 8 for Mac
    No mention of the Touch, it works differently from other iPods and has no "disk mode" as such.
    I think it can be used as a storage device by using a 3rd party App, search the the App Store for such items.
    Photos transferred to your Touch via iTunes will be of severely compromised quality i.e 640x480 pixel resolution and file size around 600-700 kb. These can be retrieved, again using a 3rd party application on your computer, such as [Touch Copy|http://www.wideanglesoftware.com/touchcopy> but you will not get back original quality images.
    Good luck,
    Dud.

  • How can I keep my MacBook safe is Apple is no longer supporting Snow Leopard? My MacBook was purchased in 2006 and cannot be upgraded to the newer operating systems.

    I have a MacBook which I purchased in 2006. It cannot upgrade to newer operating systems.Since Apple has stopped support to Snow Leopard, how can I keep my MacBook safe? Buying another computer is not an option. Any ideas or suggestions? Many thanks.

    Klaus1 wrote:
    Apple still sell, and therefore support, Snow Leopard.
    For what it's worth, from my reading of the Snow Leopard EULA (and I would  assume that there is similar language in the EULAs for all other operating systems, as well), I'm not seeing any obligation on the part of Apple to provide Security Updates of any kind, period/full stop. The wording appears to be completely "use at your own risk." I have no idea whether this "use at your own risk" would survive a legal challenge, or if such a legal challenge would depend on whether or not Apple is still selling (or even giving away for free) an OS, or whether local law would, according to this, override the EULA. Perhaps this is why Apple never formally announces EOL or discontinuance of support for an OS. They can always claim that they are still supporting an OS, whether or not in any practical sense, they are. There was even a very late Flashback detection and removal script which Apple issued for 10.5 well after it was clear that they had stopped supporting Leopard. This hardly constituted ongoing support, but perhaps it was to deter the threat of legal action, or maybe it was simply out of benevolence. I don't know.
    Besides that, even when Apple was still actively "supporting" Snow Leopard, which I don't think it is any longer, "use at your own risk" would still have applied to a case where Apple may have been late with a patch, or a response, or an adequate response, to a zero-day threat, such as Flashback was, which was constantly evolving. Many thousands were affected by that, and, to my knowledge, at least, there was no legal action directed at Apple throughout or after that episode. If there was any, I don't think it succeeded.
    7. Disclaimer of Warranties. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT, TO THE EXTENT PERMITTED BY APPLICABLE LAW, USE OF THE APPLE SOFTWARE AND ANY SERVICES PERFORMED BY OR THROUGH THE APPLE SOFTWARE (COLLECTIVELY “SERVICES”) IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE APPLE SOFTWARE AND SERVICES ARE PROVIDED “AS IS” AND “AS AVAILABLE”, WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND APPLE AND APPLE'S LICENSORS (COLLECTIVELY REFERRED TO AS “APPLE” FOR THE PURPOSES OF SECTIONS 7 and 8) HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE APPLE SOFTWARE AND SERVICES, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF SATISFACTORY QUALITY, OF FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. APPLE DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE APPLE SOFTWARE AND SERVICES, THAT THE FUNCTIONS CONTAINED IN, OR SERVICES PERFORMED OR PROVIDED BY, THE APPLE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE APPLE SOFTWARE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE, THAT ANY SERVICES WILL CONTINUE TO BE MADE AVAILABLE, THAT THE APPLE SOFTWARE OR SERVICES WILL BE COMPATIBLE OR WORK WITH ANY THIRD PARTY SOFTWARE, APPLICATIONS OR THIRD PARTY SERVICES, OR THAT DEFECTS IN THE APPLE SOFTWARE OR SERVICES WILL BE CORRECTED. INSTALLATION OF THIS SOFTWARE MAY AFFECT THE USABILITY OF THIRD PARTY
    SOFTWARE, APPLICATIONS OR THIRD PARTY SERVICES. YOU FURTHER ACKNOWLEDGE THAT THE APPLE SOFTWARE AND SERVICES ARE NOT INTENDED OR SUITABLE FOR USE IN SITUATIONS OR ENVIRONMENTS WHERE THE FAILURE OR TIME DELAYS OF, OR ERRORS OR INACCURACIES IN THE CONTENT, DATA OR INFORMATION PROVIDED BY, THE APPLE SOFTWARE OR SERVICES COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE, INCLUDING WITHOUT LIMITATION THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT OR WEAPONS SYSTEMS. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY APPLE OR AN APPLE AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE APPLE SOFTWARE OR SERVICES PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THE ABOVE EXCLUSION AND LIMITATIONS MAY NOT APPLY TO YOU.
    8. Limitation of Liability. TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT SHALL APPLE BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, LOSS OF DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR USE OR INABILITY TO USE THE APPLE SOFTWARE AND SERVICES OR ANY THIRD PARTY SOFTWARE OR APPLICATIONS IN CONJUNCTION WITH THE APPLE SOFTWARE, HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE) AND EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT APPLY TO YOU. In no event shall Apple's total liability to you for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the amount of fifty dollars ($50.00). The foregoing limitations will apply even if the above stated remedy fails of its essential purpose.
    http://images.apple.com/legal/sla/docs/osx_snow_leopard_sec_upd.pdf

  • Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane,  it enlarges it slightly and distorts it.  How can I keep that from happening?

    Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane,  it enlarges it slightly and distorts it.  How can I keep that from happening?

    Hi
    Turn off analyze/image stabilization.
    Yours Bengt W

  • How can i keep the optimize settings in Muse

    Hello
    I just uploaded a web site www.coopdebici.com
    I was very carefully optimizing the images in adobe photoshop, and make them always at 100%.
    When the web site was oline i takes a lot to charge some images and i just realized that Muse increase a lot the file size of most of them!
    So, how can i keep the original optimize settings?
    I don't want to replace the images manually using ftp
    Help me please
    Sebastián

    I just realized what happens.
    I see that some images keep the original names an its compression and size, but other images doesn't.
    The "problem" is with the round corners that i used, the original images are in jpg, but in order to make the round corner the Muse convert them in to png and it increases a lot the file size.
    This can be helpful for you

  • How can I keep metadata on an embedded EPS file in AI?

    How can I keep metadata on embedded EPS images (from Photoshop) in Illustrator, like it does for JPG?
    The top image is an eps I embedded, and the bottom one is a JPG. They are both located on a remote server.
    Any help will be appreciated.
    Thanks!

    I do the same thing as you do...
    My music is on an external drive as to not use up gigabytes of storage that need not be used for media.
    There are a couple basic principles to iTunes that I believe you should know.
    1. iTunes is not a media storage program. It does not store your media "in iTunes". It simply is an organization tool for your media already on a hard disk.
    2. As iTunes is not a storage mechanism, it has no way to "know" whether or not the media that is listed is actually there. This is where the "design" of iTunes comes into play.
    I like to think of iTunes as a bread-crumb trail. The "music" in iTunes, isn't actually there. The bread crumb is the location on the external hard drive.
    If that bread crumb trail disappears (in this case the external drive you use). If said external drive is not plugged in, that bread crumb trail is not able to be followed. iTunes is "lost" and unable to find the media. The only way to remedy this is to place the media on your local drive.
    To address your issue of the library. If you hold down shift, you can select your library on your external drive. It will be a file with an .itl extension. The folder name will be your external drive.
    I go into edit > preferences > advanced and set my library to the correct location. Make sure you check the box "Copy to iTunes Folder when importing" (or whatever it says).
    You can't fix the issue of iTunes not seeing the media if your drive is unplugged unless you physically move the content to your OS HDD...Or any other HDD you use.

  • Firefox 10 desktop shortcut reappears after deletion how can I keep it off desktop?

    I keep removing the desk top shortcut and within the day it reappears on its own. I use the quick launch bar at bottom of Windows 7 to launch firefox I don't need the extra shortcut. How can I keep the shortcut off my desktop?
    Windows 7 Home Premium 32-bit. AMD Athlon II x4 630 processor.
    Visionman Barebone PC

    Make sure that Firefox gets installed properly.
    Open the DMG file and drag to Firefox program to the application folder on your hard drive.
    You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
    See:
    * [[Installing Firefox on Mac]]
    * http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

  • How can I keep emails and read later when off line please

    How can I keep email to read later when off line please

    I'm not sure how it works on your iPad, but once the email has been downloaded onto my iPad, I can read them even in Airplane mode with WiFi disabled. I don't see the images that are in the emails, but I can read the messages. I have one POP account and three IMAP accounts and it works for all four accounts.

  • When converting word to PDF and reducing the size, the formatting changes how can i keep the format but reduce the size?

    When converting word to PDF and reducing the size, the formatting changes how can i keep the format but reduce the size?

    The original file is 32 MB:
    15 MB is images
    15 MB is Content stream
    2 MB is everything else
    After the PDF/A-1B save as:
    The file is 182 MB
    Almost 100% is Images
    It is an architecture portfolio with many complex images.  Is there a setting when I change to PDF/A that can limit the growth of the image files?

  • How can I keep the browser window stretched across my two displays?

    I run am trying to run dual monitor setup and have the Firefox browser span the two monitors. Whenever a Firefox dialog opens, such as Preferences or Print, the window zooms to fit the one primary monitor. How can I keep the browser window stretched across my two displays?

    Thanks very much for your response to my question -very helpful.
    Do you have any recommendations for a good book on Edge Animate?
    Thanks,
    Shaun
    Date: Thu, 25 Oct 2012 17:10:43 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I change the browser window background color when playing an Edge animation?
        Re: How can I change the browser window background color when playing an Edge animation?
        created by heathrowe in Edge Animate - View the full discussion
    ADD this to compositionReady handler, change the hex color code to your desired color //Force body of webpage to a specific color$("body").css("background-color","#5d5e61"); Darrell
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4801409#4801409
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4801409#4801409
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4801409#4801409. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Edge Animate by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • My computer with my original library has crashed, how can i keep all the songs on my iphone, but still add new songs from my new library?

    My computer has died and will not be working ever again. Problem is, i have all of my songs on that computer in my itunes library as well as on my phone. Now i want to add some songs to my phone from some new cds and it tells me i will loose all my songs on my phone right now when i perform the sync. How can i keep all of the songs on my iphone because now i do not have copies of these songs anymore except on my iphone?????? From what i have read, itunes is a joke because it only goes one way apparently. Not happy with itunes right now, more then a bit of a joke

    It has always been very basic to always maintain a backup copy of your computer for this very occasion.  Use your backup copy of your computer to put everything on the new one.
    If for some reason you have failed to backup, big mistake, then you can transfer itunes purchases from the iphone to the computer:  File>Transfer Purchases
    You may be able to buy a 3rd party program to get any other music off of the iphone ( not supported by Apple).
    When you sync the iphone, it will erase the current content and replace with content form the new computer.
    "Not happy with itunes right now, more then a bit of a joke"
    Not itunes fault that you did not do the very basics and maintain a backup copy.

Maybe you are looking for