How can I keepalive for 2 different applications without using script?

Have a CSS with 2 web server loadbalanced. Initially the keepalive was set to ssl but now the client would like to add another keepalive type http. How can i do this without writing script. Though there is quite number of example in the forum but I'm still confused. Is there any clear and complete sample config for this type of installation.
Below is the example of working config of my client.
service server1
ip address 10.150.1.10
keepalive type ssl
active
service server2
ip address 10.150.1.11
keepalive type ssl
active
Owner Layer3
content Layer3_a
add service server1
add service server2
vip address 10.150.1.12
balance aca
advance-balance sticky-srcip

If you want to use multiple keepalives for a service, you must use a script. The alternative would be to create 2 content rules, and 2 sets of services, one for port 80 (or whatever) and one for port 443 (or whatever), and use http for one and ssl for the other.
Michael Voight
CSE

Similar Messages

  • How can I pay for photoshop CC without using a credit card?

    My son is paying for CC without using a credit card, The subscription is being taken from his bank account/debit card, I was told this wasn't possible by an adobe rep. Is it possible?
    Adobe told me everyone that has a subscription must have a credit card to pay.

    A debit card, if it can be used as a credit card, can be used to pay for anything online. If he's using his debit card to pay for his CC account then it is possible. The rep may have just been referring to using a checking account being a method that isn't possible.
    He needs to stop using his debit card to pay for anything online as debit cards are unsecured so if someone were to acquire the card number they could clear out his checking account and your son would be unable to do anything about it.

  • How can I create a new entry without using LOV for foreign keys.

    Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
    How can I create a new employee without using LOV for the foreign key "job_id".
    On the first page I would like to choose the job_title from adf read-only table.
    After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
    Regards M.Winkler
    Edited by: user3541283 on 06.10.2008 03:44
    Edited by: user3541283 on 06.10.2008 03:50

    Hi,
    usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
    Frank

  • Hi i dont have a wifi broadband n i just bought the new ipod touch can anyone tell me how 2 download apps for my ipod without using wifi

    hi i dont have a wifi broadband n i just bought the new ipod touch can anyone tell me how 2 download apps for my ipod without using wifi

    Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.

  • My iPhone has two computers in (iTunes wifi sync), how can I remove one of them without using it ?

    Hello everyone.
    My iPhone has two computers in (iTunes wifi sync) how can I remove one of them without using that computer?
    because that PC stopped working so I had to recover it. Now everything is gone on that PC.
    Also I bought a new computer (MacBook Pro) and I use iTunes on it in the mean time. Now I want to remove the old computer!
    here is a photo of my (iTunes WiFi sync)
    is there any way that I can use to do that?
    Thanks

    Hello,
    Did you ever find a solution for this ?
    I have the same issue and i dont know how to fix it.

  • How can you purchase additional cloud storage without using account credit?

    How can you purchase additional cloud storage without using account credit? Want credit to remain on accounts as it was a gift for my daughter and we haven't finished using it yet but need to purchase additional storage for all of our accounts. Can't I just override the automatic payment from the account and just pay with a separate cc?

    Purchasing additional storage will not use account credit anyway.  It gets directly charged to your credit card, and you must use a credit card since it is an annual subscription service you are purchasing, not a one time payment option.  They insist on a credit card so they have a billable account for the automatic annual subscription fee.  At least it was that way when I did it.
    Sorry - http://support.apple.com/kb/HT4874  either I did not have enough credit at the time or something has changed since I did it?  Maybe call Apple and do it over the phone (explain why you want to do it that way)?

  • How can i create an apple id without using a visa or credit card

    how can i create an apple id without using a visa or credit card

    Follow the directions here, EXACTLY:
    http://support.apple.com/kb/ht2534

  • HT4623 How can i download ios 7.1 without using my iphone and itunes

    How can i download ios 7.1 without using my iphone and itunes

    If you don't use your phone and you don't use iTunes, what are you expecting to use? Your options to update your device are Over The Air through Settings>General>Software Update or by connecting the device to iTunes and updating.
    Best of luck.

  • How to run MRP for Bulk Material without using LTP

    Hi, how can I run MRP for BULK material without using LTP.
    Thanks in advance
    BK

    Hi,
    Use trasnsaction code OPPQ and goto BOM Explosion and selection depends on
    Field selected
    No dependent requirements are created for informational purposes for bulk material items in the plant selected. This can improve system performance.
    Field not selected
    Dependent requirements are created for bulk material items in the plant selected. These dependent requirements are displayed in the planned order for informational purposes only. They are not considered in the net requirements calculation; that is, they are not included in material requirements planning (MRP) and are not displayed in the stock/requirements list
    Reg,
    Deepak.
    Edited by: deepak k b on Nov 11, 2008 6:56 AM

  • HT4910 How can I increase my storage space without using a debit/credit card?

    HOw can I increase my iCloud storage without a credit/debit card!!

    Payment methods accepted include iTunes store credit, credit cards, and debit cards. If you do not have enough iTunes store credit to complete your upgrade, you will be charged the remaining amount.
    Purchasing iCloud storage and billing:
    http://support.apple.com/kb/HT4874

  • How can I print from an iPad without using wireless?

    I'm in a situation where I need to print something from the iPad, but will not be in a wireless network. Is there no utility that allows me to go directly from the iPad to any printer? I haven't purchased it yet, so I'm willing to get pretty much anything to make this work.

    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

    I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

    We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available).  Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
    If I have to downgrade to LabView 2012, where can I get the installation for this?

  • How can I find out what application is using bandw...

    I've noticed recently there is a constant active internet connection on my phone. If I disconnect it in connection manager it just starts again but I can't figure out which application on my phone is causing this as there is nothing running in the open applications window but I know alot of apps can hide now.
    Is there any way to find out what needs this constant connection?
    Solved!
    Go to Solution.

    Hello, dear brothers in arms...I have exactly the same problem with my new Nokia C7.
    It is connecting to WLAN automatically less then a minute after I disconnect it !
    I have set  as follows: Menu->Settings->Connectivity -> Settings:
    Switch to WLAN: MANNUAL
    Data use in home country: ALWAYS ASK
    Data use when abroad: ALWAYS ASK
    and however, it is trying to connect all the time.
    When at home - it stays connected to my home WLAN (despite all the disconnections I make manually).
    When out of coverage of my home WLAN - giving reports "Connection failed" every few minutes.
    Of course the battery lasts not more then a day.
    Have double checked - my email boxes are set on "Sync frequency: MANNUAL SYNC ONLY"
    I did not set any application for any automatic actions...
    Any idea how to control this smarty?

  • How to Send Emails for failed messages without using Alert

    Hi Experts,
    In our project, we need to trigger Emails for the failed messages in SXMB_MONI / Adapter Engine without using Alert Framewrok.
    Please let me know the below :
    1. Is this really possible to avoid Alert?
    2. If possible, then can we accomplish this by creating any PI Scenario? Please provide me some knowledge.
    3. Can we do it by writing any ABAP Code? If ABAP report can make it, then please provide me the code/ tables which will be needed. If any Blog/ Wiki is there, then please let me know the URLs. 
    Thanks,
    Nabendu.

    Hi Nabendu,
       If your customer asks for mails with specific text for message failure, tell that it is not possible. Because Message will go through several engines like Adapter Engine, Integration Engine, BPE. You can not generate mails for the message failures in all these areas with out standard alert mechanism. These are pure technical alerts which only PI people can understand, not business alerts.
    Example: assume your sender channel is unable to connect FTP Server, in this case you can not generate even though you will develop adapter module to generate alerts.
                            So for message validation only you can send mails not for message failures.
    thanks,
    madhu

  • How can I write an iBook review without using iTunes?

    I have a problem on how can I write a review on an iPad book or iBook without using iTunes. Some of my friends are also asking me on how can I write a review on an iBook without using iTunes. I am on dilemma and I need your help to solve this problem. I hope you can respond soon if possible. Thanks.

    Simple, you cannot.  You can only post reviews through the store front gateway.
    Well, actually, you can write the review in any editor or tool you wish to use, but to post it, you have to login to the store account.  If you do not have an AppleID and store account, you cannot post a review.

Maybe you are looking for