How can i know .exe installer.

hi everyone,
i want to know that how can i know that any .exe file installer and the silent installation switches with that.I need tools who can search the installer for a specified .EXE file and silent switches for installation attached to that .exe file.
2nd which is the best tool for EXE to MSI conversion

You are in the wrong forum for that question. Please post in the developer forum or in the vendor forum for you products.
¯\_(ツ)_/¯

Similar Messages

How can i make the installer

i hava allmost completed my project (Java Swing and Ms Access).
but i dont know how to make the EXE & installer. in my computer i have dual OS. one have JVM and the other have not JVM. I am using NetBeans 5.5.1 as IDE. When i am trying to run application.jar for Dos Prompt. it is running but when i am trying to it on the other OS it is not running and give an error message something " Don't have the main class..." please help me.
How can i make a installer of my project with which i can install the package any where.

you can use install4j utility.. it is open source so u can have a free copy..

How can I know that the listener is starting up?

Hi,
I follow the instruction in ACS Oracle Installation guide. I believe that many of you use the document to install oracle. I have a question when I try to start the listener. when I execute ./listener8i stop or ./listener8i start I got the same message, which is different from the message in the ACS document.
Here is the message:
Oracle 8i listener start/stop
Startting the Listener for 8i:
LSNRCTL for Linux: Version 8.1.6.0.0 - Production on 31-AUG-2000 14:00:00
(c) Copyright 1998, 1999, Oracle Corporation. All rights reserved.
TNS-01106: Listener using listener name LISTNENER has already been startd.
Is the message above correct? How can I know the listener is started up?
TIA,
Tony

try "lsnrctl status" on the linux command line.
for further info use "lsnrctl help"

How can i know which version of Smartview is installed on my system ?

Hi All,
How can i know which version of Smartview is installed on my system ?

Do you know what version of Essbase you are running? that could help. You can find that in EAS. Right click on the server name and select edit ptoperties, then look on the environment tab. As a final measure, find the smartview.exe on yout machine right click and select properties. in one of the tabs there might be a version number

How can i modify exe resource in java?

How can i modify exe resource in java?
No jni
thx.

if it is .NET code decompilation is possible if, and only if the code is not Packed by protections!
but if the EXE file is native and created by VB 6.0,C/C++,Delphi,... it is not possible to obtain source code from it, not as far as i know.
(some program does it , but the returned source code is as useful as its assembly code in debugger).
if decompilation was that easy then Reverse Engineering was no longer needed!
What program it is so that can put two exe file into each other ?
the program you seen might put second exe file into its DATA section then when it executes ,
it jumps to data section of itself!
otherwise it is not possible.
Good luck.
Edited by: 0mega7 on Apr 5, 2008 8:27 AM
Edited by: 0mega7 on Apr 5, 2008 8:29 AM

How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

Thanks for looking into this Jeff!
I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
The problem tracking updates with Desktop Creative Cloud Software are;
1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get detected with the software version update which would create problem in reporting.
3)For all CC products, there is no base or previous updates available for installation if we miss one.
I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
Regards,
Subrat

How can one powershell.exe session start up a new powershell.exe session in a new window?

How can one powershell.exe session start up a new powershell.exe session in a new window?

Er... good luck with that. :) If you know the shortcut that was used to launch the current window, you could pass that shortcut path to Start-Process, but that would only work if you did not move or resize the original window, etc. For
example, on my computer I can do this:
Start-Process 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Accessories\Windows PowerShell\Windows PowerShell.lnk'

NMI_HARDWARE_FAILURE (80) - how can I know if my driver caused this BSOD

hi,
I got NMI_HARDWARE_FAILURE (80) BSOD when my driver wad loaded and runnig.
how can I know if this BSOD caused from my driver or not? I don't see my driver on the stack in the memory dump.
adding the windbg !analyze -v:
2: kd> !analyze -v
*                        Bugcheck Analysis
NMI_HARDWARE_FAILURE (80)
This is typically due to a hardware malfunction. The hardware supplier should
be called.
Arguments:
Arg1: 00000000004f4454
Arg2: 0000000000000000
Arg3: 0000000000000000
Arg4: 0000000000000000
Debugging Details:
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x80
PROCESS_NAME: System
CURRENT_IRQL: f
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff802bbdc4c42 to fffff802bb75c0a0
STACK_TEXT:
ffffd000`2064bd08 fffff802`bbdc4c42 : 00000000`00000080 00000000`004f4454 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
ffffd000`2064bd10 fffff802`bb7c7401 : 00000000`00000001 fffff802`bbdd48f0 fffff802`bbdd48f0 ffffe000`012b7038 : hal!HalBugCheckSystem+0x7e
ffffd000`2064bd50 fffff802`bbdc5bcd : ffffd000`000006c0 ffffd000`2064bf3c 00000000`00000001 00000000`00000000 : nt!WheaReportHwError+0x22d
ffffd000`2064bdb0 fffff802`bb7e8e90 : ffffd000`2064bf70 00000000`00000001 00000000`00000000 fffff802`bb7e98f3 : hal!HalHandleNMI+0xfe
ffffd000`2064bde0 fffff802`bb7655c2 : ffffd000`20640180 ffffd000`2064bff0 00000000`00000000 00000000`00000000 : nt!KiProcessNMI+0x150
ffffd000`2064be30 fffff802`bb765436 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxNmiInterrupt+0x82
ffffd000`2064bf70 fffff802`bb762300 : fffff802`bb75fbc2 00000000`00000010 00000000`00000286 ffffd000`20c8db60 : nt!KiNmiInterrupt+0x176
ffffd000`20c8db38 fffff802`bb75fbc2 : ffffd000`20640180 ffffd000`20640180 ffffd000`2064c100 00000000`00000000 : nt!KiIpiInterrupt
ffffd000`20c8db60 00000000`00000000 : ffffd000`20c8e000 ffffd000`20c87000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x32
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!WheaReportHwError+22d
fffff802`bb7c7401 eb70            jmp     nt!WheaReportHwError+0x29f (fffff802`bb7c7473)
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!WheaReportHwError+22d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5215d156
IMAGE_VERSION: 6.3.9600.16384
BUCKET_ID_FUNC_OFFSET: 22d
FAILURE_BUCKET_ID: 0x80_nt!WheaReportHwError
BUCKET_ID: 0x80_nt!WheaReportHwError
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x80_nt!wheareporthwerror
FAILURE_ID_HASH: {d5f8e3c5-00d9-a505-9cff-8d968ebc3f39}
Followup: MachineOwner
any help would very appreciated!

My device is really PCI device, but my target computer is  64bit-based, so I cannot use the !pci extention command. so I tried the !pcitree command and identified my device, then I typed !devext with my device extention address and that I got:
!devext 0xffffe00000f8d1b0
PDO Extension, Bus ..., Device ..., Function ....
DevObj 0xffffe00000f8d060 Parent FDO DevExt 0xffffe00000f8a7f0
Device State = PciStarted
Vendor ID ... Device ID ...
Subsystem Vendor ID ... Subsystem ID ...
Header Type 0, Class Base/Sub 00/00 (Pre PCI 2.0/Pre PCI 2.0 Non-VGA Device)
Programming Interface: 00, Revision: 01, IntPin: 01, RawLine 14
Possible Decodes ((cmd & 7) = 7): BMI
Capabilities: Ptr=80, power
Logical Device Power State: D0
Device Wake Level:          Unspecified
WaitWakeIrp:                <none>
Requirements:     Alignment Length    Minimum          Maximum
    BAR0    Mem:    00001000 00001000 0000000000000000 ffffffffffffffff
Resources:        Start            Length
    BAR0    Mem:    00000000c0100000 00001000
Interrupt Requirement:
    Line Based - Min Vector = 0x0, Max Vector = 0xffffffff
Interrupt Resource:    Type - Line Based, Interrupt Line = 0x14
does the device state here alike the status field which you spoke about? and if so, can I assume my device is ok and the BSOD didn't occur from it\ from its driver?

How can we know AR invoice is opended or closed?

Hi All,
I have a invoices(Receivables) data in 11.5.5. Now i would like to migrate open invoice or partially paid invoice to R12. How can we know that invoices(Receivables) is opened or closed.
Suggestions will be highly appreciated.
Thanks.
Edited by: user627525 on Feb 24, 2009 11:13 PM

Can't an invoice have more than 1 payment schedule id?
Yes, an invoice can have more than 1 Payment schedule ID
If so, would they all have to be zero or closed?
We have to check by Payment schedule ID
Regards,
Sridhar

How can I know which model of K9A2VM I have?

I have a K9A2VM motherboard with an Athlon 64 x2 3600+ AM2 CPU. I would now like to upgrade to an AM3 Phenom II CPU with lots and lots of cores.
However, I have a problem. I don't know if I have K9A2VM-FD or K9A2VM-FIH and I don't know how to find out. I've opened my box and looked at the card, but it only says K9A2VM. By reading the specs and looking at pictures, I know it has to be one of them, or at least that it is not K9A2VM-F V2 since it only has two RAM slots and I have four of them installed. There are other obvious differences too, which I can easily spot by looking at the picture.
Now, looking at the CPU support page for -FD and -FIH, they seem to have differences in what CPUs they support:
-FD at least supports an X6: http://www.msi.com/product/mb/K9A2VM-FD.html#/?div=CPUSupport
Phenom II X6 Thuban HDT90ZFBK6DGR 1090T 200 3.20 3M 6M E0 125 7501v1B.zip
But the -FIH CPU support page is different: http://www.msi.com/product/mb/K9A2VM-FIH.html#/?div=CPUSupport
If I can use that processor, I'm really happy. But -FIH doesn't seem to support Phenom II at all. So provided that the information in the CPU support page is correct, it's fairly important to me to know which model I have. But in case nobody knows how I can distinguish between them; if I buy a Phenom II X6 CPU and it turns out that my motherboard doesn't support it; what is the worst thing that can happen? Will I break the CPU or motherboard, or will it simply not work, but the hardware will still be fine?
Thanks.

So this is a MS-7501 Version 1.0 card, in addition to being a K9A2VM. The entire web refers to it as "K9A2VM-FD / FHI". One will work, and the other will go up in smoke. And there is no easy way to know which is which. So how can I know? The reason I bought this card was so I could upgrade the CPU at a later time. Now it seems that's not possible, because the available information is so very poor. I've never had to gamble when purchasing hardware from other vendors. Is this common for MSI?

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal, How can i know whether my phone is in use??

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget. How can i know whether my phone is in use??

You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can i know if my ipad 3 is original, how can i know if my ipad 3 is original

Hi there.. I bought an IPAD 3 from my friend. How can i know if the IPAD is original?

Check warranty
https://selfsolve.apple.com/agreementWarrantyDynamic.do

How can i know who get my photos and messages from my icloud???

How can i know who get my photos and messages from my icloud???

Nobody, except the persons who have your username and password or with whom you share photos streams would be able to see anything from you.

How can i know .exe installer.

Similar Messages

Maybe you are looking for