How can I know for sure its my browser?

At times it wont load the page,and sometimes it says firefox not responding?

The basic steps are to turn off add-ons to see if the problem may be one of the add-ons.
* Firefox -> Help -> Restart with add-ons disabled
You also want to make sure your plug-gins are up to date:
[https://www.mozilla.org/en-US/plugincheck/ Plug-in Check]
Lastly, take a look at this article that goes more in depth:
[http://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding|Firefox Firefox Hangs or Not Responding]
Hope this helps!

Similar Messages

  • Firefox seems to keep my microsoft security essentials from updating. how can i know for sure? not a problen until lately.

    what more can i say. when automatic updates occur, none of the microsoft security essentials are successful; but failed.
    help please.

    Firefox are not the culprit for this kinda issue, contact microsoft support for more help

  • Built-in iSight - how do you know for sure it is off?

    I have a new iMac with built-in iSight. I have been checking into security software for my iMac and came across the program called Undercover by Orbicule. One of the functions of that program is that is utilizes the built-in iSight camera to take pictures of the room/person who potentially stole your computer. So that caused me to wonder how do I know for sure my built-in iSight camera is turned off and not accessible by some program outside of my control? I know the green light comes on if I use it in iMovie or something like that, but how do I know it isn't being hacked and used without my knowledge?

    Black electrical tape.

  • How do i know for sure if someone is accessing my phone and viewing my activities which i think are private

    how do i know for sure if someone is accessing my phone and viewing my activities which i think are private

    Why do you think this?
    There are no tracking software for a non jailbroken phone.
    do you share an apple id with someone?

  • Out of range...How do I know for sure?

    Installed WRT150N wireless router between DSL modem and computer. No problem doing so using setup CD that came with the router. Solid intenet connection. (Wired)
    Installed WMP300N wireless card in comp 100 feet away in another frame building. Also used setup CD that came with the card. Card seems to have installed ok. Also used Easy Link Advisor and Wireless Network Monitor - But Monitor Link Info Tab - has message...
    "Cannot Associate with the Access Point."
    Signal Strength box is blank
    Link Quality box is blank
    On Profiles Tab -
    Profile and wireless network name fields are blank ( Empty)
    "Scan" or "Connect" works but produces nothing.
    Monitor states adapter is Active; green light on back of card is blinking. (Scanning)
    It's like there is no wireless signal anywhere close!?
    I don't know what's going on. I used the main wired comp to "try and Add" the computer to the network but that didn't work either.
    I can't find a thing wrong and have spent hours reading FAQ's. Woof, no joy.
    It looks to me like the comp/wireless card is just too far away from the wireless router to pick up a signal from it or a firefly has more power in his little butt!? Beats me but it's "wireless N" technology ( touting ideal conditions of 1400 feet line of sight ) and its totally out of range at 100 feet ... between two frame buildings?
    Any ideas? I would like some sort of prize offered to the person that has actually connected with the most distance between them/their comp and the wireless router.  I know 100 feet is no joy. Anybody have a connection at 95 feet? Raise your hand! I'd like to know..I bet a lot of us would! 
    (Hey linksys, what I gotta do...Load the comp in a wagon towing an extension cord to see how close I can get to the router before the card finds a signal and connects? (Now theres an idea! Makes me wish I had a lappy.) The up side is the security...one might be able to park over this router and not get a connection. Hahaha
    ( Don't jump on me...respect your elders..I'm 60 with a tricky ticker! Not doing my blood pressure any good...)
    Ain't this supposed to be an excellent brand...You don't like "ain't", Ok...arsn't this supposed to be an excellent brand of equipment?
    Does this sound like out of range to you? Anyone?
    Thanks,
    Thu

    On router change radio band to standard, and standard channel to 11. Change advanced wireless settings : change beacon interval to 50, fragmentation threshold to 2306, RTS threshold to 2307, DTIM to 2. On computer instead of using linksys WLAN monitor, switch to windows XP's client WZC. It might connect after that.

  • How will I know for sure if my homestudy will be recognized by adobe for the student-discount?

    I will start a home study by NTI (netherlands) but I can't find on the adobe websites which homeschools are recognized for the student-discount. It only sais: 'as defined in the national rules for home and distancescholing' but nowhere to be found that definition or a list of recognized schools.

    Please refer to Softwarekortingen voor studenten, geschiktheid van student | Adobe for Education eligibility.
    Education FAQ
    In case it does not resolve the issue, please contact Adobe Support.
    Regards
    Rajshree

  • I think my iPhone has been accessed without my permission. How do I know for sure.?

    I have been having issues in my laptops for weeks. They are blatantly being accessed remotely and now it seems like they've  gotten into my phone. Just because my wireless network is changing without my permission and my data logs show that programs and apps are being accessed when I haven't accessed them. Does iPhone run through apps daily even if they're not installed?  Also . I saw video.toolbox which I understand(correct me if I'm wrong) is used on jailbroken phones. I don't have anything incriminating to hide on my phone or otherwise. But the invasion of privacy is sickening. Also. What about my passwords and financial info???  Please help me block this user and keep my info safe. Unless of course I'm being paranoid because of my laptop.

    You are being paranoid because of your laptop.

  • How can I know if a Cinema Display 22 inch ADC is dead ?

    Hi,
    I bought a 22 inch ADC Cinema Display for my PowerMac G4/400 (Gigabit Ethernet). I upgraded the PowerMac with an ATI Radeon 7500 graphic card and a Sonnet 1Ghz processor. I'm running 10.4.9 and have the latest ATI driver for the card.
    When I plugged the ADC cable, the computer started but the display didn't light up. All lights are off and the USB ports are not powered. If I unplug he PowerMac, plug the display and plug the PowerMac back, I can't start it using the power button (on the display neither).
    I checked and rechecked my PowerMac and Cinema display specs and requirements and everything should be compatible. Is my Cinema Display dead ? How can I know for sure ? Are there any drivers I must install ?

    I'm having a similar problem, only it's recurring on several Cinema Display monitors on different machines.
    One thing we have been able to figure out is that the problem appears to be the power brick. By repeatedly unplugging and wiggling the power cord at the brick, the monitor will eventually come back on... until you restart it.
    This is VERY frustrating for such expensive monitors (not to mention being Apple products). I suspect the problem lies with faulty power bricks, and I'll be following up with Applecare to see what they have to say about it.
    - Alex Locke
    PowerMac G5 Dual Processor   Mac OS X (10.4.5)  

  • Hello my iphone 3gs just been stolen how can i block the iphone and how could i track it i don't know for sure if i have find my iphone? please help i got many accounts on it and i don't have a passcode :((

    hello my iphone 3gs just been stolen how can i block the iphone and how could i track it i don't know for sure if i have find my iphone? please help i got many accounts on it and i don't have a passcode :((

    It was never free for the 3GS.
    It is if the initial sign-up is done on an iPhone 4, iPad or iPod touch 4th gen.
    From http://support.apple.com/kb/HT4436:
    After I sign up for Find My iPhone for free, can I use it on other iOS devices?
    Yes, if your devices are running iOS 4.2. For example, you can sign up for Find My iPhone for free on your iPad and use the same account information to sign in to MobileMe on your iPhone 3GS and turn on Find My iPhone.

  • I have been charged by iTunes through my credit card but I didn't buy any application, how can i know iTunes charge me for what?

    I have been charged by iTunes through my credit card but I didn't buy any application, how can i know iTunes charge me for?

    You can check the purchase history on your account via the Store > View Account menu option on your computer's iTunes, though I'm not sure if that shows auto-renewing subscriptions. Have you added or changed your credit card details on your account (when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) ? If you haven't changed your card details or can't find or don't recognise what the charge is for then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can I know the delta field for CO-PA datasource?

    Hi,folks:
        How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
        Full points will be given to u.
    Martin Xie

    Dear Martin,
    The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
    See this link...
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
    Also check ROOSOURCE in R3, asmentioned by Dinesh.
    Hope it helps.

  • How can i know my logic pro 9 is for 3 install's?

    how can i know my logic pro 9 is for 3 install's?

    Logic Pro 9 (the DVD version) can be installed on a notebook and a desktop (2). The Mac App Store products can be installed on all Macs that you own. If you need a volume license (e.g. for a school) you should contact Apple.

  • How can i know the price for iphone s5 in Middle East in Oman

    hi..
    please help me
    i want to buy an iphone 5s. how can i buy it from apple store?
    how can i know the real price for my country, aware that i am in Middle East exactly in Oman?
    and how many time it will take to reach in my country Oman?
    please help as soon as you can..
    thank you

    As I said, if you want to buy it from the USA online Apple store, you will need to have a credit card issued by an American Bank or financial company, you will have to have a USA billing address associated with that card, and you will have to have it shipped to a USA street address.
    Aramax is a shipping company - you do not have a credit card from them and they cannot pay for your purchase.  Having an account with a shipping company doesn't provide you with a USA source of payment for your purchase.
    As I understand it, the Oman government does not allow the iPhone to be sold in Oman, there are no official service providers for it, and thus there is no legitimate source to buy an iPhone from within Oman.
    Online Apple stores do not allow payment by foreign means or in foreign currency, they do not do currency exchange, nor do they ship internationally.

  • How can I know the right component for a transaction?

    Hi, I have a question
    When creating a new message in Solution Manager, notif_create, how can I know the right component given the transaction code or program name?
    Thanks in advance
    Edited by: María Valdés on Aug 19, 2008 6:25 PM

    Hello Maria,
    Well, in the Support Message window, place the cursor in Component box and press F4. This will brings up another window which contains the components list to which you are authorized. From that list you can choose about which component you want to create that particular support message.
    For example, if you are from Quality department, the following can be visible when you press F4.
    QM - Quality Management
      -- QM-ADB Adobe Forms
           -- QM-ADB-PRN Print Forms
      For the Print Forms, the component will be QM-ADB-PRN
    I hope it helps.
    Cheers,
    Satish.

  • How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

    How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

    Thanks for looking into this Jeff!
    I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
    The problem tracking updates with Desktop Creative Cloud Software are;
    1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
    2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get  detected with the software version update which would create problem in reporting.
    3)For all CC products, there is no base or previous updates available for installation if we miss one.
    I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
    So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
    Regards,
    Subrat

Maybe you are looking for