How can I know if a process is running in the system???

Hello all,
I generate a pdf file with Reports Builder called from Forms Builder.
This pdf is printed in the default printer with the command line "start AcroRd32.exe /p /h path_file", inside host command, which open the Acrobat Reader and prints the document in the default printer.
After the document is printed the document is closed but not the Acrobat Reader program.
I need an instruction to know if the acrord32.exe is running in the system.
Could anyone help me?
Thank you very much for advance,
Jordi

do you use the commandline, because you want to print directly to your default-printer?
then have a look at the orarrp - toolset on otn.
It's a technique, which directly prints via MIME-extensions of your browser. Internally Adobe is used for this direct print, but you only have to install a little program on your client.
try it
Gerd

Similar Messages

My macpro runs slow with or without internet on..... How can I find out if something is running in the background?

my macpro runs slow with or without internet on..... How can I find out if something is running in the background?

Please boot in safe mode and test. Still slow? If you connect to a wireless network, you may have to connect with Ethernet in safe mode.
After testing, reboot as usual (not in safe mode.)
Mac OS X: Starting up in Safe Mode

How can I permanently remove plugin-container? It slows the system too much.

plugin-container slows my computer down too much.
I remove it using Task manager, but it keeps coming back.
How can I permanently remove it short of changing to the Google Browser?

See this support article. It tells you how you can disable Out of Process Plugins. <br />
http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins#Disabling_crash_protection

How can I know who Unscheduled Process Chain

Hi,
I am looking for a way to know who unscheduled process chain.
After looking in forum I got to know about Table TBTCO but there are huge no. of entries in that.
Above that I need to know about a chain that was unshceduled on 4th May can I give that selection while looking in TBTCO Or any selection related to Process chain name ? Please suggest.
Let me know if there is altogether other way to find this out.
Thanks in Advance

Hi,
It is not possible to trace who have de-scheduled the chain....we can de-schedule the chain in two ways.......
open the chain in the Design View --> In the top "Execution" tab --> Remove from schedule.......(In this case the whole chain will turn in grey)
If someone do this then there will be no log........
Secondly, right click on the "Start Process " in the Design View --> Display Scheduled Jobs --> from there delete the released job......In this case also there will be no trace...........no log.........(In this case only the start process will turn in grey, rest of the chain will be in green colour only)...
Now as I have explained the colour difference from there you can understand that how the chain was de-scheduled ....in which method...........
But you can't trace that who has done it......
Regards,
Debjani.......

How can we know weather a report is running in background or foreground?

Is there any system variable to find it?

Hi Adiseshi,
You can check the value of the system variable SY-BATCH. If it contains the value 'X' it is running in background else in foreground.
Hope this helps!
Regards,
Saurabh

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can I boot from my recovery dvd to reach the system recovery C: on a extern hard disc

I think a have a virus in my notebook Pavilion 15 and want to restore my C partition with a system back up. I made this system back up a month ago and it is stored on a extern hard disc. I have also made a recovery dvd. How can I boot my notebook from my dvd to start the procedure? I have 2 partions on my notebook. The second partition contains My Documents.
Thanks in advance.
Tineke

It is unlikely that the back-up of the system recovery, that you have stored on an external drive, will be useful in recovering your computer. Please see HP PCs - Performing an HP System Recovery (Windows 8), for instructions on using the HP Recovery Disc set your created earlier. Typically, the disc set is 4 to 6 DVDs.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How can I permanently stop Backup Asisstant from running in the background?

Backup Asisstant plus is constantly running in the background of my phone. It is annoying and I can not even open it up under the "manage accounts" section of my phone. When I do this it just has the blue circle spinning forever and ever never openning up at all. Is there a way to fix this or am I just stuck battling this stupid app day after day. It came with the Verizon phone, but I had this before and customer service was able to stop it from running all the time. Now I get told there is nothing Verizon can do. So how can I stop this app permanently and why is there so much comflicting information coming from Verizon agents and its website? I cant seem to get a solid answer.

I have a galaxy s3. The backup assistant just freezes my phone. It is always running in the background draining memory from my phone slowing it down. It is beyond annoying since even after a hard reset I can not even access the Backup Assistant + to manually change settings, so I would just like it to stay off. It has not helped me recover much in the way it was advertised.

How can we know a particular maintenance plan is stopped

Hi All,
Suppose a particular maintenace plan BP-P-0108 which is monthly recurring plan is created in 01/01/2008 and scheduled from 01/01/2008. Subsequesnly, the maintenace plan was stopped in 01/01/2011.How can I know this maintenance plan is stoppped from scheduling?
Thanks
ebenalfa

HI Pete,
Thanks for your response.
I am in the process of migrating maintenance plans which has been created already in the past 10 to 12 years. During this period, many maintenance plans were cretaed and scheduled. Some of the maintenance plans might have become obsolete and need not be migrated. The maintenance plans may not have scheduled in the near past. How can I know that these are not scheduled in the near past?
If the user sets deletion flag or deactivate it. i may not have the scheduling happen.
Apart from these two statuses of maintenance plan, is there any way I can identify a stopped maintenance paln schedlue ?
If so, Which SAP table will give me the required information
Thanks, ebenalfa

How can I know which screen-group is?

Hi experts!!
I don't know how can I know which screen-group is associaciate to the values...for example, how can I associate this block to a screen-group for after do this? IF SCREEN-GROUP1 EQ 'DAT'.
SELECTION-SCREEN BEGIN OF BLOCK B9 WITH FRAME TITLE TEXT-017.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS: FECHA FOR P0001-BEGDA MODIF ID DAT.
SELECTION-SCREEN END OF BLOCK B9.
Thanks and regards,
Rebeca

Hi,
Check out this code.
REPORT Z94406_TEST_123                         .
TABLES: pa0001,t549a.
DATA: n(6) TYPE c.
SELECTION-SCREEN BEGIN OF BLOCK za2 WITH FRAME.
PARAMETERS:p1 RADIOBUTTON GROUP grp1 user-command a DEFAULT 'X'.
SELECT-OPTIONS: s_prd1 FOR n NO-EXTENSION modif id G1.
PARAMETERS:p2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_period FOR pa0001-begda NO-EXTENSION modif id G2.
SELECTION-SCREEN END OF BLOCK za2.
AT SELECTION-SCREEN OUTPUT.
if p1 = 'X'.
LOOP AT SCREEN.
    IF screen-group1 = 'G2' or screen-group1 = 'G2'.
            screen-input = '0'.
      MODIFY SCREEN.
   ENDIF.
ENDLOOP.
ELSE.
IF screen-group1 = 'G2' or screen-group1 = 'G2'.
      screen-input = '1'.
      MODIFY SCREEN.
   ENDIF.
ENDLOOP.
   ENDIF.
Regards,
Syed

How can i know .exe installer.

hi everyone,
i want to know that how can i know that any .exe file installer and the silent installation switches with that.I need tools who can search the installer for a specified .EXE file and silent switches for installation attached to that .exe file.
2nd which is the best tool for EXE to MSI conversion

You are in the wrong forum for that question. Please post in the developer forum or in the vendor forum for you products.
¯\_(ツ)_/¯

How can u know the process chain total time, individual time?

Hi guru's
How can u know the process chain total time, individual time?
and what options will available in sm37?
Thanks
prabha reddy

Hi Prabha
Iam not very sure about total time and individual times.
But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status 2.start date & time 3. Log ID of each process chain.
or you can go to log view of particular individual chain to know how long it has run.
SM37: tcode for simple job selection.
here you check the status of job.
you can select for certain conditions like
1. scheduled
2. released
3. ready
4.active
5. cancelled
Assign points if it was helpful
Revert back if you need further info/
regards
AP

How can i know if the sync process is done after a bookmark adding or so such and when it is processing , immediately after changes or what?

how can i know if the sync process is done after a bookmark adding or so such and when it is processing , immediately after changes or what?

I don't know whether you solve your problem or not! Anyway, I have the same problem. The program hangs when getInputStream is called.
DataInputStream dis = new DataInputStream(request.getInputStream());
If you have the answer, please let me know. Thanks!!

My email account and facebook accounts have been compromised, how can I know if I have malware of a keylogger?

About 2 weeks ago my Yahoo email account and AIM email account had been compromised and the passwords changed. From what I was told/researched at the time, changing my passwords to more secure passwords was the best option.
I changed my passwords for the two accounts that had been compromised, and I even when as far to change my passwords for everything that I used frequently, and accounts that were tied to the email accounts, facebook, twitter, etc.
This morning at 12:28am (EST) my facebook was accessed by somebody other than me and my password changed. When I noticed this my first thought was to check to see if my email that I log in with was compromised. It had also underwent a password change.
Obviously the next thing I did was to try and change my passwords.
I had my AIM email send a change password form to my Yahoo email (which hasn't been tampered with this time) I followed the form and input a new password. After that, it brought me to a page where I was to enter the new password and sign in. When I input the new password it yet again said, "incorrect password or username". After I tried the new password a few more times it finally brought me to a screen saying basically that my account was locked due to suspicious activity and I still haven't been able to try and log in again.
I also can't access my Facebook account at all. I obviously can't send a new password to my email because I can't access it. Whenever I tried to send my info to an alternate email it wants me to answer a security question, and for some reason the answer I enter, which should be the correct answer, is said to be false.
Facebook offers another option of recovering your account by getting 3 friends to be sent security codes, I tried this method but it would never let me complete it because I locked my account. I locked my account after figuring out it was being tampered with. Whenever I try to get the security codes sent to 3 friends it ultimately leads me to a screen saying my account is locked and I need to sign in to unlock it, which is some major bull considering if I could log in I wouldn't need to be going through the process to begin with!
One friend has told me somebody maybe using some file to track my moves, a keytracker?
Is there anyway I can confirm that?
How can I get rid of it, how can I protect myself?
I've been using the internet almost daily since I was 8 years old, I'm now 20, this is the first of these kinds of problems I've ever had.
Protip: I run Mac OSX 10.6.8 Snow Leopard.

Whatever is going on, it's extremely unlikely to be malware of any kind. See my Mac Malware Guide.
As to what is going on, it's hard to say, but if someone is targeting you specifically, it's not that hard for an experienced person to do. It may not even require actual hacking... see the story of Matt Honan's hacking:
http://www.wired.com/gadgetlab/2012/08/apple-amazon-mat-honan-hacking/
In short, his attacker managed to get access to Mr. Honan's Amazon account, which gave him access to the last 4 digits of Mr. Honan's credit card that was on file. That credit card was also on file with Apple, and those 4 digits were used to give him access to Mr. Honan's Apple ID. And from there all went to h***. No hacking required, just talking to folks on the phone and convincing them to do what the hacker wanted.
In addition, note that some kinds of accounts provide you with a way to give access to another person. For example, GMail provides a way to add someone else's account, giving them access to your e-mail. Hackers have been known to use such features to leave themselves hidden back doors, so they can keep getting in after you have changed the password. I don't know whether AIM or Yahoo have such features, but it's possible.
Finally, note that there are always possible issues with weaknesses in the servers. For example, right now, someone's selling an exploit kit for Yahoo mail. I don't know whether the vulnerability it relies on has been patched or not, but if it hasn't been, your attacker may be using that method to get access.
In any case, you need to address these issues with AIM, Yahoo and Facebook.

How do we know that which processing Class doing what functionality ?

Hi SAP HR Experts .
Q:-1 How do we know that which processing Class doing what functionality ?
Like : Processing class 1 , 2 ,... etc .
Similerly Simulation Class is On (Check Box is Ticked) then what impact we occur ?
Kind Regards : rajneesh

Hi Rajneesh,
The best way to understand the processing class is to go thru each and every class in table T512W_D ( Go to SM30 -> t512w_d ).Here in this table you will have the wagetypes ,just double click on the wagetypes and you will find the screen with processing classes. Just go thru each and every class by f1 . Each class is having its own importance and implication.
Same with Cumulation class. Go to SM30 -> enter T54C3. Follow the same logic here too, and try to analyse the max thru f1.
This is how we can understand the logic.
Regards,
Sri..

How can I know if a process is running in the system???

Similar Messages

Maybe you are looking for