How can I know if my podcast is still under review a week after its submission ?

I had a podcast that had been approved by Apple ; this podcast had enough success so I had to change my host for another one.
Changing the feed of a podcast that can be found in iTunes isn't possible. So I submitted another feed, with same content for firsts episodes, but with a different title, as if Apple sees two podcasts, with same title or same URL, the new one will always be deleted.
I had notification that podcast is under review, a week ago, but since, I didn't received approval notification. I wonder if the context explained up there could be the reason why my podcast is not still approved ?

Guyhom wrote:
Changing the feed of a podcast that can be found in iTunes isn't possible.
Yes it is: http://www.apple.com/itunes/podcasts/specs.html#changing
I had notification that podcast is under review, a week ago, but since, I didn't received approval notification.
I can't give you a hard-and-fast answer on how long it takes to get approval - as it requires human intervention it's dependent on factors including how long a queue you are in - but my impression is that it's likely to take at least two weeks, possibly longer. All you can do is wait.

Similar Messages

How can i know if my Apple tv still has warranty

How can i know if my Apple tv still has warranty

If AppleTV 1 (silver), when did you buy it?
If AppleTV 2 they came out in September 2010 in US later in other places, so still under 1year warranty.
If you took out Applecare you can go to support, enter the product's number and check the warranty.
AC

Defective iPhone 5/ How do I know if my iphone is still under warranty?

Basically, just a few days ago I started experiencing a problem with my Sleep/Wake button and I noticed that it only works when pressed on the far left side. If I were to go to the Apple Store to try and it replaced, how can I tell if my iPhone is still under warranty and if they will replace it before driving all the way over to the Apple Store? (which is about 2 hours away from me.)

So basically I have warranty (can get my iPhone replaced) until this date?

HT1349 How do I know if my itouch is still under warranty?

How do I know if my ipod is still under warranty?

https://selfsolve.apple.com/agreementWarrantyDynamic.do
Message was edited by: EZ Jim
Mac OSX 10.8.2

How do i know if my phone is still under warranty?

How do i tell if my phone is still under warranty?
It wont charge. Tried 3 cords, only says its charging when you hook it to an 120v outlet but as soon as u unplug it goes black again. Does nothing when hooked to a computer.

How can I tell if my iPhone is in-warranty?
Apple's Limited Warranty for iPhone begins on the date that the iPhone is originally purchased and covers the iPhone for one year from that date. To determine your warranty coverage, find your iPhone serial number and enter it in Apple's Check Your Service and Support Coverage tool. Apple may need to examine your proof-of-purchase document to verify your iPhone's warranty status.
Note: The service coverage information described at the Apple Support site is based on the date-of-purchase information available to Apple, depending on when or whether you registered your product or if you purchased it from an Apple Authorized Reseller. If you believe that the information is inaccurate, please update it by using the Apple Product Registration tool (may not be available in all languages).

How can I stop auto refreshing a new web page in XP immediately after its opened?

In XP, once I access a new web page Firefox auto refreshes that page once the page is ~80-90% opened - how can i stop this refresh?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

HT204053 Ho do I know if my iPad is still under warranty

How will I know if my iPad is still under warranty

Input the iPad serial number at the link below.
https://selfsolve.apple.com/agreementWarrantyDynamic.do

How can I know how many people subscribded to my podcast ?

How can I know how many people subscribded to my podcast ?
Is there a tool or something ?
See ya !!
Steph

This depends on where you have your podcast hosted. Some ISPs provide logs of access to pages and downloads: if your podcast is embedded in a web page then some ISPs provide facilites for a hits counter (though this wouldn't necessarily show how many people had bothered to listen to it).
However if your podcast is hosted on .Mac then there are no such facilities provided, and it's not something you can do from your end, it would have to be on the server. Similarly the iTunes store doesn't provide any way of tracking subscribers.

How can we know AR invoice is opended or closed?

Hi All,
I have a invoices(Receivables) data in 11.5.5. Now i would like to migrate open invoice or partially paid invoice to R12. How can we know that invoices(Receivables) is opened or closed.
Suggestions will be highly appreciated.
Thanks.
Edited by: user627525 on Feb 24, 2009 11:13 PM

Can't an invoice have more than 1 payment schedule id?
Yes, an invoice can have more than 1 Payment schedule ID
If so, would they all have to be zero or closed?
We have to check by Payment schedule ID
Regards,
Sridhar

How can I make a book/podcast listening playlist for a blind person?

How can I make a book/podcast listening playlist for a blind person? How can lots of content be loaded, so that no navigation is required, for hundreds of hours of enjoyment?
I wanted to create a single playlist with hundreds of hours of books and podcasts for my grandmother who is blind. Then I planned to use something like the app CarTunes which basically makes the touch screen simply a gigantic pause/play button for an already created playlist. This is perfect for a blind person. The problem: Apple no longer allows you to have a playlist with Audible Books and Podcasts. I have tried; but the podcasts and books are stripped from the playlist. It seems like all podcast and book players require navigation. (How aggravating!?)
Any help in creating hundreds of hours long spoken (selected between books and podcasts) audio content playlist for a blind person would be much appreciated!!!!

Well, good news and bad news. I found out how to tell iTunes that all my music videos are, in fact, actual "music videos" and categorize them as such. In the "Get Info" screen for a track, there is a dropdown selector where you can pick the "meta" type, such as "Music Video", "Home Video", "Movie", "TV Show", etc. This allows iTunes and iOS to think they are all music videos and play them in the same list.
Unfortunately, this is not compatable with my third party device, which is now refusing to play my music videos in a playlist and will only play them one at a time (in a single-track infinite loop no less). Very frustrating!

How can I know which model of K9A2VM I have?

I have a K9A2VM motherboard with an Athlon 64 x2 3600+ AM2 CPU. I would now like to upgrade to an AM3 Phenom II CPU with lots and lots of cores.
However, I have a problem. I don't know if I have K9A2VM-FD or K9A2VM-FIH and I don't know how to find out. I've opened my box and looked at the card, but it only says K9A2VM. By reading the specs and looking at pictures, I know it has to be one of them, or at least that it is not K9A2VM-F V2 since it only has two RAM slots and I have four of them installed. There are other obvious differences too, which I can easily spot by looking at the picture.
Now, looking at the CPU support page for -FD and -FIH, they seem to have differences in what CPUs they support:
-FD at least supports an X6: http://www.msi.com/product/mb/K9A2VM-FD.html#/?div=CPUSupport
Phenom II X6 Thuban HDT90ZFBK6DGR 1090T 200 3.20 3M 6M E0 125 7501v1B.zip
But the -FIH CPU support page is different: http://www.msi.com/product/mb/K9A2VM-FIH.html#/?div=CPUSupport
If I can use that processor, I'm really happy. But -FIH doesn't seem to support Phenom II at all. So provided that the information in the CPU support page is correct, it's fairly important to me to know which model I have. But in case nobody knows how I can distinguish between them; if I buy a Phenom II X6 CPU and it turns out that my motherboard doesn't support it; what is the worst thing that can happen? Will I break the CPU or motherboard, or will it simply not work, but the hardware will still be fine?
Thanks.

So this is a MS-7501 Version 1.0 card, in addition to being a K9A2VM. The entire web refers to it as "K9A2VM-FD / FHI". One will work, and the other will go up in smoke. And there is no easy way to know which is which. So how can I know? The reason I bought this card was so I could upgrade the CPU at a later time. Now it seems that's not possible, because the available information is so very poor. I've never had to gamble when purchasing hardware from other vendors. Is this common for MSI?

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal, How can i know whether my phone is in use??

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget. How can i know whether my phone is in use??

You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can I know that the listener is starting up?

Hi,
I follow the instruction in ACS Oracle Installation guide. I believe that many of you use the document to install oracle. I have a question when I try to start the listener. when I execute ./listener8i stop or ./listener8i start I got the same message, which is different from the message in the ACS document.
Here is the message:
Oracle 8i listener start/stop
Startting the Listener for 8i:
LSNRCTL for Linux: Version 8.1.6.0.0 - Production on 31-AUG-2000 14:00:00
(c) Copyright 1998, 1999, Oracle Corporation. All rights reserved.
TNS-01106: Listener using listener name LISTNENER has already been startd.
Is the message above correct? How can I know the listener is started up?
TIA,
Tony

try "lsnrctl status" on the linux command line.
for further info use "lsnrctl help"

How can I know if my podcast is still under review a week after its submission ?

Similar Messages

Maybe you are looking for