How can i know landuage of the String?

I don't know if the problem is too common but may be locality information can help somehow...
But I did not find any methods/utils for that.

Impossible!!
It shold have an easy solution!You're right! It is very easy!
String string = "Hello World";
Locale locale = string.getLocale();Sigh...You should sigh ... as a previous poster (above you) noted, locale does not guarantee language. If my locale is Switzerland, is the string in German, French, Italian or Schweizerdeutsch ?

Similar Messages

How can we know version of the database ?

Hi all,
How can we know the version of the under lying database ? Please share your ideas.
Thanks

Hi,
Choose System->Status Menu item to open the status window.
You can see the DB data in the Bottom right.
Regards
Karthik D

How can we know what r the reports done on a particular cube or ods

Hi Fnds ,
I just want to know what r the reports done on my CUBE or ODS.
is there ant specfic table or t-code for that.

Hi Ravi,
Double-click on your DSO/ Cube, go to the 'where-used list' option on the top right-hand side. When you drop-down, you can see all the objects where the DSO/Cube is used. If it is being used in a query, the same would be displayed
Rgds,
Sonal

How can we know who deleted the objects (iView, Page, ...) ?

Hi All
Can you tell us how to find the Portal user id that deleted iView ?
Thank you very much,
Anek.

Hi
As far as I know, such an audit trail is not created.
It is really down to individual companies to set in place standards and controls for migrating metadata between environments. Most companies have their DBA or senior administrator do such migrations and don't let multiple people have permission to do so. Even though you might have multiple Discoverer administrators you really should have one Discoverer controller who has overall responsibility.
I think you should take what happened as a wake up call to enforce stricter control going forwards. Migrating from production to test is nowhere near as dangerous as the other way round.
Best wishes
Michael

How can I know the delta field for CO-PA datasource?

Hi,folks:
How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
Full points will be given to u.
Martin Xie

Dear Martin,
The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
See this link...
http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
Also check ROOSOURCE in R3, asmentioned by Dinesh.
Hope it helps.

How can i know the size of ResultSet???

i run a statment
ResultSet rs = cs.executeQuery();
rs.next();
rs.getString(i) ; <-------------------- how can i know what is the max i can i get???????
i didn't find function that returns the size of it !!!!!!!!!!
any one can help me

u want to know the number of rows returned or size of columns?

How can i know the logging time per data acquisition?

Hi There,
I'm using SignalExpress version 2.5.1 Tektronix Edition.
I'm connecting my PC with a Tektronix Oscilloscope through Ethernet cross-cable.
I use SignalExpress to log the data, the question is how can i know what will the time be for each data that acquire and saved in the log?
As inside the log, under the time row, it just only show number in sequence but not time.
Hope that some one can help me on the matter.
Thanks in advance.
Good Day!

hi Priyanka,
you can try
1. check in metadata repository to get the data target name. rsa1->metadata repository->query
2. if query exist in system, go to BEx Analyzer, type in query technical name or description, and 'change'/display the query in query designer, data target name is on right side (cube/ods).
or 3. go to table RSRREPDIR, COMPID = query technical name, and INFOCUBE is the data target name. (if you only know query description, go to table RSZELTTXT, get ELTUID and put the value to COMPUID in RSRREPDIR to get INFOCUBE the data target name)
after got the data target, go to rsa1->infoprovider, locate the data target, and right click 'show dataflow', you will get the datasource name.
hope this helps.

How can we know the return code of BDC Program ?

Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
Harish

Hi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
        msgnr type t100-msgnr,
        text type t100-text,
       end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
       AUART TYPE VBAK-AUART,
       KUNNR TYPE RV45A-KUNNR,
       BSTKD TYPE VBKD-BSTKD,
       MABNR TYPE RV45A-MABNR,
       KWMENG(2) type C,
       KBETR(2) type C,
      END OF DD_VA01.
DATA:IT_VA01     Like TABLE OF DD_VA01,
     WA_VA01     Like LINE OF IT_VA01,
     WA_VA01_F   Like LINE OF IT_VA01,
     IT_BDCDATA TYPE TABLE OF BDCDATA,
     WA_BDCDATA Like Line OF IT_BDCDATA,
     W_FNAME     TYPE STRING,
     messtab like bdcmsgcoll occurs 0 with header line,
     it_errmess type table of errmess,
     wa_errmess like line of it_errmess,
     err_message type string.
data: zf1 type i,
      zc1 type c value '2',
      fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
     WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
     WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
       PERFORM set_header_flag.
       PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = W_FNAME
      HAS_FIELD_SEPARATOR = '#'
    TABLES
      DATA_TAB            = IT_VA01.
endform.
form call_transaction.
    PERFORM bdc_field       using 'BDC_OKCODE' '/11'.
    CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
    refresh it_bdcdata.
endform.
FORM set_header_flag.
       WA_VA01_F-AUART = WA_VA01-AUART.
       WA_VA01_F-KUNNR = WA_VA01-KUNNR.
       WA_VA01_F-BSTKD = WA_VA01-BSTKD.
       if zf1 = 1.
           PERFORM call_transaction.
       endif.
       zf1 = 1.
endform.   "set_header_flag.
form create_bdc_header_data.
     perform bdc_dynpro      using 'SAPMV45A' '0101'.
     perform bdc_field       using 'VBAK-AUART' WA_VA01-AUART.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     perform bdc_field       using 'KUAGV-KUNNR' WA_VA01-KUNNR.
     perform bdc_field       using 'VBKD-BSTKD' WA_VA01-BSTKD.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMSSY0' '0120'.
     perform bdc_field       using 'BDC_CURSOR' '04/06'.
     perform bdc_field       using 'BDC_OKCODE' '=CHOO'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
     CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
     perform bdc_field       using 'BDC_CURSOR' FN.
     perform bdc_field       using FN WA_VA01-KWMENG.
     CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-KBETR.
     CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-MABNR.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
    if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
        SELECT SINGLE msgnr text FROM T100
                        into wa_errmess
                        WHERE SPRSL = MESSTAB-MSGSPRA
                          AND ARBGB = MESSTAB-MSGID
                          AND MSGNR = MESSTAB-MSGNR.
        IF SY-SUBRC = 0.
          err_message = wa_errmess-TEXT.
          IF err_message CS '&1'.
            REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
          ELSE.
            REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
          ENDIF.
          CONDENSE err_message.
          WRITE: / MESSTAB-MSGTYP, err_message .
        ELSE.
          WRITE: / MESSTAB.
        ENDIF.
    endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO   = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR     2148     0001235     R-1162     8     17
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     6     25
OR     2148     0001235     R-1162     4     12
OR     2148     0001236     R-1162     3     12
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     1     25
OR     2148     0001236     R-1162     7     12
OR     2148     0001236     R-1161     8     30
OR     2148     0001236     100-400     10     25
OR     2148     0001235     R-1161     5     30
OR     2148     0001235     100-400     2     25
OR     2148     0001235     R-11621     3     12
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     1     25
OR     2148     0001235     R-1162     7     12
OR     2148     0001235     R-1161     8     30
OR     2148     0001235     100-400     10     25
OR     2148     0001236     R-1162     8     17
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     6     25
OR     2148     0001236     R-1162     4     12
OR     2148     0001236     R-1161     5     30
OR     2148     0001236     100-400     2     25

How can I know which link was clicked in the link list

Hi everyone
I'm using list of links in my page to display list of the files in some directory.
How can I know which link user was clicked. There are some code:
<%
String dir = "..//files//";
File fin = new File(dir);
File files[]=fin.listFiles();
for(int i=0;i<files.length;i++)
File x = files;
%>
<%=x.getName()%><br>
<%
%>
Please help

You need to pass some data on the querystring to the page you are linking to.
<a href="Main_Work.jsp?file=<%=x.getName()%>"><%=x.getName()%></a><br>
This will send a parameter called "file" with the value of the file name that the user clicked.
Now in Main_Work.jsp you can access this data as follows:
<%
String s = request.getParameter("file");
File f = new File("..//files//"+s);
%>

How can i know the port of my database?

hello,
how can i know the port of my database is working in?
ty

user11933068 wrote:
I don't know how to do this, sorry
:-(TNSNAMES.ORA is used by the client to resolve an alias to an actual server/listenr port/db service name.
TNSNAMES.ORA is found, by defualt, on the client machine at $ORACLE_HOME/network/admin
Here's how it works:
Suppose I have this in my tnsnames.ora:
fubar =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = btzlkfp)
)So, my connect string would look something like this:
$> sqlplus scott/tiger@fubarTNS will take the name 'fubar' and look it up in the tnsnames file. In my example, it will then route the connection request to 'myhost' (using other net services to resolve that to an actual IP address), and place the request on port 1521 at that server. The listener will pick that up and see that scott wants to log on to database 'btzlkpf'.
There's more, but at this stage I want you to understand the connection between what you enter for your connect string and the database itself.

How can I know the database is using Cost Based or Rule Based?

Hi all expertise,
How can I know the database is using Cost Based or Rule Based?
If cost based it is using, what methods are need to use to minimize the cost when database is running? And which tables I can see the performance of the database?
Thanks
Amy

how to see database setting ?
use this
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 1
optimizer_features_enable string 9.2.0
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_max_permutations integer 2000
optimizer_mode string CHOOSE
choose means if table statistics is available then it will use cost
else
use rule based optimizer
for seeing performnace of table use
set autotrace on
and run your query
if it doen't show cost.it means it use rule based
for using cost based
u will calculate table statistics
9i
dbms_stats.gather_table_stats('owner','table');
8i
analyze table <table_name> compute statistics;
hope it will help you
kuljeet pal singh

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can I know that the listener is starting up?

Hi,
I follow the instruction in ACS Oracle Installation guide. I believe that many of you use the document to install oracle. I have a question when I try to start the listener. when I execute ./listener8i stop or ./listener8i start I got the same message, which is different from the message in the ACS document.
Here is the message:
Oracle 8i listener start/stop
Startting the Listener for 8i:
LSNRCTL for Linux: Version 8.1.6.0.0 - Production on 31-AUG-2000 14:00:00
(c) Copyright 1998, 1999, Oracle Corporation. All rights reserved.
TNS-01106: Listener using listener name LISTNENER has already been startd.
Is the message above correct? How can I know the listener is started up?
TIA,
Tony

try "lsnrctl status" on the linux command line.
for further info use "lsnrctl help"

How can we know the affected reports when i remove object from universe

Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.

Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports)

How can i know landuage of the String?

Similar Messages

Maybe you are looking for