How can I know the ECC version on my SAP
Hello,
My partner suggested me to change the ECC version to one upper to 5.0, but I don´t know what my version is, How can I know that?
What is the prerequirement that I need to install an upper version of ECC?
Thanks.
"SAP R/3 Enterprise" is "SAP R/3 Enterprise 4.7"
short excursion to "SAP release versions" (starting at 4.6):
SAP R/3 4.6C
SAP R/3 Enterprise 4.7 (Extensions 110)
SAP R/3 Enterprise 4.7 (Extensions 200)
SAP ECC 5.0
SAP ERP 6.0 (formerly known as SAP ECC 6.0)
next release roundabout 2010 available
so, starting form your release you can upgrade to the next relese in the line: SAP ECC 5.0 or to the current release (SAP ERP 6.0)
kr, achim
Similar Messages
-
How can I know the PersonalJava version on my iPaq?
Hello,
I am a real novice and trying to get started. I have an iPaq H3950.
In some prerequisites for continuing my actions, there is required that I have PersonalJava version 3.1 on my handheld. How can I find out if I meet this requirement? If not, what should I do to do so?
Thanks for any feedback.Thanks, mymdamin.
Does that Personal Java version 3.1 already exist?
In fact, it is for installing an SAP Mobile Engine.
Next to this, also an AWT (Abstract Window Toolkit) is required for the user interface. Is this included, or should I get it elsewhere? -
HT3939 how can i know the ios version with out activate the divice?
hi, my iphone 4 was locked with ktf korea, and i made the payment for unlocking the phone through internet one month ago,
but i am not able to do the second step which provided by the unlocking site, i don't know which ios is running in it ,
can i get it with out activate the phone....Are you able to access the home screen? With the app that looks like a cog, it's the settings app, then you scroll a little way down to General, then the first thing you should see is "About", hit that, scroll down until you see "Version", that is your iOS that your phone is currently running. OR go to Settings > General > Software Update> and it'll tell you there too. OR try plugging your phone into your computer via 30 pin/usb cord. I'm assuming you already have an iTunes account with a current iTunes I.D. and passcode, once you plug it in and iTunes recognizes the device, in the top right it will say "iPhone" and this little bar that says that will have a spinning icon while it is synced to iTunes, click it and in the banner at the top of iTunes will say what version of iTunes the iPhone 4 has.
-
How can i know the size of client
hi
how can i know the size of client ?
SAP ECC6
OS AIX 5.2
DB ORACLE10g
regards
KaranHi,
1)Test run normal client copy .
=DDt will give the size.
2)There is SAP note for Client size analyse.
Here is 118823
3)run program YSTABSIZ.
Regards,
Muralidhar -
How can i know the version of autoconfig ?
hi
I am on 12.1.1
to determine my autopatch version i used Note 390666.1
i ran
SET head off Lines 120 pages 100
col n_patch format A10
col bug_number format A10
col patch_name format A10
spool LACF_ptch_level.txt
select ' LACF ' FROM dual;
select bug_number, decode(bug_number,
'4494373' ,'R12.TXK.A'
,'5872965' ,'R12.OAM.A'
,'5909746' ,'R12.TXK.A.1'
,'5917601' ,'R12.TXK.A.2'
,'6077487' ,'R12.TXK.A.DELTA.3'
,'6145693' ,'R12.Rapidclone Cons Jan2008'
,'6776948' ,'R12.Rapidclone CONSOLIDATED'
) n_patch, last_update_date
FROM ad_bugs
WHERE bug_number IN ( '4494373', '5872965', '5909746', '5917601', '6077487', '6145693', '6776948' );
the output was
4494373 R12.TXK.A 04-JAN-07
4494373 R12.TXK.A 22-JAN-08
5872965 R12.OAM.A 22-OCT-07
5872965 R12.OAM.A 22-OCT-07
5909746 R12.TXK.A. 22-OCT-07
1
5909746 R12.TXK.A. 21-JAN-08
1
5917601 R12.TXK.A. 22-OCT-07
2
5917601 R12.TXK.A. 21-JAN-08
2
6077487 R12.TXK.A. 22-OCT-07
DELTA.3
6077487 R12.TXK.A. 21-JAN-08
DELTA.3
6145693 R12.Rapidc 06-NOV-08
lone Cons
Jan2008
how can i know the version of autoconfig from that?
ThanksHi,
4494373 R12.TXK.A 04-JAN-07
4494373 R12.TXK.A 22-JAN-08
5872965 R12.OAM.A 22-OCT-07
5872965 R12.OAM.A 22-OCT-07
5909746 R12.TXK.A. 22-OCT-07
5909746 R12.TXK.A. 21-JAN-08
5917601 R12.TXK.A. 22-OCT-07
5917601 R12.TXK.A. 21-JAN-08
6077487 R12.TXK.A. 22-OCT-07
6077487 R12.TXK.A. 21-JAN-08
6145693 R12.Rapidc 06-NOV-08
how can i know the version of autoconfig from that?The above indicates that the latest patches applied are 6077487 and 6145693.
To find the latest AutoConfig and Rapid Clone patches on R12, please refer to:
Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
Thanks,
Hussein -
How can I know the version of Application Server Java Virtual Machine
How can I know the version of Application Server Java Virtual Machine?
Thanks a lot.Thats easy. Your jdk/jre are located in the App Server home directory. Just run the java command under the jdk directory with the "-version" switch and it will provide you with detailed information about your VM.
For example if you're doing it at command prompt it will be something like
java -versionI hope this will be useful to you.
Regards,
Wasif -
How can i know the RPM of my HD?
I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!Hi!!
It doesn't show...
Vendor: NVidia
Product: MCP79 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Those are the 2 texts...
Any idea?
Thanks!! -
How do we know the portal version ?
Hi ,
Could you help on this .
How do I know the exact version of my portal , J2ee engine .where is the best place to see this .
Thanks
AneezJoshua,
Thanks for your speed reply . I just copied from the location you have told me and pasted before .
Portal Version Details
#Tue May 03 18:51:22 CEST 2005
Creation-Date=20050503
Creation-Time=1851
Manifest-Version=1.0
Implementation-Title=Portal version.info
JDK-Version=1.3
Creation-User=jointadm
Implementation-Vendor=SAP AG
Sync-Changelist=45786
Implementation-Vendor-Id=com.sap
version=6.0.12.0.0
Specification-Vendor=SAP AG
Implementation-Version=6.4.0.0.200505031851
Make-Release=60NW_VAL_REL
Sync-Timestamp=2005/05/03 16\:36\:13
Version History
6.0.12.0.0.Enterprise_Portal_Support_Release
Can u make out some thing ?
Aneez -
How can i know the table fragments
Hi
How can i know the table is fragmented.
Thank youIf you're in 10g you could try use the Segment Advisor to identify various issues etc with your table. This will also provide recommendations on how to improve things.
(below script shamelessly stolen from the brilliant Oracle Base website)
-- segment_adv_table.sql
-- Use Segment Advisor to analyse a table.
-- Original Version
-- http://www.oracle-base.com/articles/10g/SpaceObjectTransactionManagement10g.php
-- owner is SCOTT
-- table is EMP
-- do a search/replace to change these 2 values and re-run it ;)
DECLARE
l_object_id NUMBER;
BEGIN
-- Create a segment advisor task for the SCOTT.EMP table.
DBMS_ADVISOR.create_task (
advisor_name => 'Segment Advisor',
task_name => 'EMP_SEGMENT_ADVISOR',
task_desc => 'Segment Advisor For EMP');
DBMS_ADVISOR.create_object (
task_name => 'EMP_SEGMENT_ADVISOR',
object_type => 'TABLE',
attr1 => 'SCOTT',
attr2 => 'EMP',
attr3 => NULL,
attr4 => 'null',
attr5 => NULL,
object_id => l_object_id);
DBMS_ADVISOR.set_task_parameter (
task_name => 'EMP_SEGMENT_ADVISOR',
parameter => 'RECOMMEND_ALL',
value => 'TRUE');
DBMS_ADVISOR.execute_task(task_name => 'EMP_SEGMENT_ADVISOR');
END;
-- Display the findings.
SET LINESIZE 250
COLUMN task_name FORMAT A20
COLUMN object_type FORMAT A20
COLUMN schema FORMAT A20
COLUMN object_name FORMAT A30
COLUMN object_name FORMAT A30
COLUMN message FORMAT A40
COLUMN more_info FORMAT A40
SELECT f.task_name,
f.impact,
o.type AS object_type,
o.attr1 AS schema,
o.attr2 AS object_name,
f.message,
f.more_info
FROM dba_advisor_findings f
JOIN dba_advisor_objects o ON f.object_id = o.object_id AND f.task_name = o.task_name
WHERE f.task_name IN ('EMP_SEGMENT_ADVISOR', 'USERS_SEGMENT_ADVISOR')
ORDER BY f.task_name, f.impact DESC; -
How can i Know the email linked to icloud
Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank youWelcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
How can we know the affected reports when i remove object from universe
Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports) -
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
How can we know the format of report
Developed a web application using java SDK.
How can we know the format of report that is is it a crystal report , PDF or excel or hyperling.
If it is crystal report then i use openDoc and the report is opened but if its a hyperlink or PDf i am not able to open the report .
Please help.
ThanksCheck the si_kind or so_progid property of object. You can use oInfoObject.getKind() to retrieve that.
a crystal report would return crystalreport a pdf would return pdf etc. -
in the old version at the bottom of the sceen it displayed the total number of media and the size of the files. how can i get the new version to diplay this?
You're welcome. It was frustrating for me as well until I stumbled across "the fix"
-
How can i know the number of lines in field-symbol internal table
how can i know the number of lines in field-symbol internal table
Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit
Maybe you are looking for
-
How to enter a specific view size
I'm brain dead for some reason. Where do you type in a value if you need to see the page a specific size? I want to view at 137% which I think is equal to actual size. I know if CS4 it was at bottom left but I can't find it in 5.
-
When trying to access the iCloud, I am getting a message requiring I sign in. This I attempt to do. However, I then get the message "Cannot Sign In", and "This Apple ID is valid, but is not an iCloud account". Somewhat perplexed & confused, I then se
-
Does anybody else get this. Burn a play list to cd, when the finished CD mounts itself at the end the finder shows one CD with the burn list name and still shows the blank cd which is not there as i have one drive. To get rid of them i have to eject
-
Stop 'save as' opening new file?
I have been saving an illustrator CS3 file as PDF at various stages. I have to make small changes to the .ai file and then save to PDF throughout the work. The trouble is that the .ai file closes and the new pdf opens in its place. This is a nuisa
-
No longer audio on .avi files when attempting to use Elements 9
I have compiled 20 years of videos from family videos and converted them to .avi files. I now want to edit these files into other smaller videos to give to my children. I have Premiere Elements 9. When I get one of these files using PE9 there is n