How can I know the end of TCP stream and/or SOAP over HTTP flow
Hi all!
I want to read SOAP messages over HTTP, from sniffed TCP fragments.
How can I decide that the TCP and/or the HTTP fragmenst finished?
For example there is a SOAP message sliced to 5 TCP packets, and the first packet contains the HTTP header and some SOAP content too. The last packet contains the SOAP XML's ending XML-tag </soap:Envelope>.
I don't want to watch every packet's end like "if the end string is </soap:Envelope> then it is the last packet", I just simply want to know which is the last packet of that message.
The TCP connection won't be closed after the message arrives, and let's say the HTTP header doesn't contain a Content-Length field.
A TCP connection is just a stream of bytes. It doesn't care what those bytes are. HTTP is built on top of TCP and specifies the ability to make a request without closing the connection (HTTP 1.1 Keep Alive). So you need to understand the HTTP protocol, understand whether it's a Keep Alive connection or not, and then do the same thing a browser would to do understand when a reply has been completed and the connection is available for the next request. Otherwise, you'll just look like you're getting loads of unrelated data as you sniff the connection. Oh, and you'll probably need to understand the HTTP chunking protocol too.
Similar Messages
-
my computer broke and i lost all files including ITunes. what happens to all the stuff purchased already. will this appear in itues when i download it agian? how can i save the music on my ipod and transfere it over to the new itunes?
Unfortunely, all movies and songs purchased in iTunes will be lost...you'll have to purchase them again! Any applications you've purchased, you can download again for free.
Music Rescue is a program you can use to transfer any and all data (music, movies, pictures..) from your iPod to your computer, and iTunes.
http://www.kennettnet.co.uk/products/musicrescue/ -
How can I know the end of DataInputStream when I use readUTF()
I use the readUTF() method of DataInputStream in client to read String from server
I use catch EOFExcetpion to let the client know the end of the InputStream(that is when the server close its socket) , however it seems that donen't work
what can I do ?
class client
public void method()
DataInputStream in=new DataInputStream(socket.getInputStream);
try{
try{
while(true)
String temp= in.readUTF();
System.out.println(temp.charAt(.........));
}catch( EOFException e){}
}catch(IOException ioe){}
}when server closes , it seems that the" System.out.println "sentence keep going
the above is the simplified version, the original one is too long to put hereI think the readUTF method will straight away return you the whole content as a string and you don't have to put it in a loop.
The EOF Exception will be thrown only when the stream reaches the end before reading all the bytes.
Thanx and Regards,
Anish K George -
Help with : How Can I know the schedule for a JOB, and How Can I Change?
Hi
I have a job and I know the name...I review in table TBTCO and I saw that this jobs is schedule at 11:00 AM and at 4:00 PM, but I need to change the schedule for this job..and that this job will execute al least four times during the day...I don´t know how can I change the schedule??
I was thinking that if I run the transaction directly I can run, Im not sure, because I try to do in QAS environment... I when I try to run the program..the system doesn´t do anything..this mean I cant execute with F8, such as if I should be complete a parameter, but all the fields are completed.
Thank you for your help, I promese that I will gice you points for your help.
AliceThank you at all.
I was reviewing the options that you send me, but Im confused about... if its possible edit the schedule that this job has in this moment, because if I enter the transaction SM36 or try to see SM37..in production environment I can´t see this schedule...
And Im not sure to do the correct steps to create something new... in QAS environment..I can´´t see this job.
All of yours help are really important
Thank you again!
Alice -
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
How can i know the port of my database?
hello,
how can i know the port of my database is working in?
tyuser11933068 wrote:
I don't know how to do this, sorry
:-(TNSNAMES.ORA is used by the client to resolve an alias to an actual server/listenr port/db service name.
TNSNAMES.ORA is found, by defualt, on the client machine at $ORACLE_HOME/network/admin
Here's how it works:
Suppose I have this in my tnsnames.ora:
fubar =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = btzlkfp)
)So, my connect string would look something like this:
$> sqlplus scott/tiger@fubarTNS will take the name 'fubar' and look it up in the tnsnames file. In my example, it will then route the connection request to 'myhost' (using other net services to resolve that to an actual IP address), and place the request on port 1521 at that server. The listener will pick that up and see that scott wants to log on to database 'btzlkpf'.
There's more, but at this stage I want you to understand the connection between what you enter for your connect string and the database itself. -
Hi experts . how can we know the stock details for a perticular plant?
hi experts . how can we know the stock details for a perticular plant
check this code
REPORT YSG_MATSTK_REP LINE-SIZE 220
LINE-COUNT 50(5).
*& DATA DECLARATION *
TABLES: MARA, "GENERAL MASTER DATA
MARC, "PLANT DATA FOR MATERIAL
MARD, "STORAGE LOCATION DATA FOR MATERIAL
MBEW, "MATERIAL VALUATION
MVKE, "SALES DATA FOR MATERIAL
MAKT. "MATERIAL DESCRIPTION
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,"MATERIAL NUMBER
MBRSH LIKE MARA-MBRSH,"INDUSTRY SECTOR
MEINS LIKE MARA-MEINS,"BASE UNIT OF MEASURE
END OF I_MARA.
DATA: BEGIN OF I_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,"MATERIAL NUMBER
WERKS LIKE MARC-WERKS,"PLANT
LVORM LIKE MARC-LVORM,"FLAG MATERIAL FOR DELETION AT PLANT
"LEVEL
PSTAT LIKE MARC-PSTAT,"MAINTENANCE STATUS
DISPO LIKE MARC-DISPO,"MRP CONTROLLER
END OF I_MARC.
DATA: BEGIN OF I_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR,"MATERIAL NUMBER
MAKTX LIKE MAKT-MAKTX,"MATERIAL DESCRIPTION
END OF I_MAKT.
DATA: BEGIN OF I_MVKE OCCURS 0,
MATNR LIKE MVKE-MATNR,"MATERIAL NUMBER
VKORG LIKE MVKE-VKORG,"SALES ORGANIZATION
VTWEG LIKE MVKE-VTWEG,"DISTRIBUTION CHANNEL
END OF I_MVKE.
DATA: BEGIN OF I_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,"MATERIAL NUMBER
LGORT LIKE MARD-LGORT,"STORAGE LOCATION
LABST LIKE MARD-LABST,"VALUATED STOCK WITH UNRESTRICTED USE
END OF I_MARD.
DATA: BEGIN OF I_OUT OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
LVORM LIKE MARC-LVORM,
PSTAT LIKE MARC-PSTAT,
DISPO LIKE MARC-DISPO,
MBRSH LIKE MARA-MBRSH,
MEINS LIKE MARA-MEINS,
MAKTX LIKE MAKT-MAKTX,
VKORG LIKE MVKE-VKORG,
VTWEG LIKE MVKE-VTWEG,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
END OF I_OUT.
DATA : TOT TYPE I. " TOT - TOTAL TO PRINT STOCK
*& S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
S_DISPO FOR MARC-DISPO.
SELECTION-SCREEN END OF BLOCK B1.
*& I N I T I A L I Z A T I O N *
INITIALIZATION.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
S_MATNR-LOW = 'M-14'.
S_MATNR-HIGH = 'M-18'.
P_WERKS = '3000'.
S_LGORT-SIGN = 'I'.
S_LGORT-OPTION = 'EQ'.
S_LGORT-LOW = '0001'.
S_LGORT-HIGH = '0004'.
S_DISPO-SIGN = 'I'.
S_DISPO-OPTION = 'EQ'.
S_DISPO-LOW = '001'.
S_DISPO-HIGH = '002'.
APPEND S_DISPO.
APPEND S_LGORT.
APPEND S_MATNR.
CLEAR S_DISPO.
CLEAR S_LGORT.
CLEAR S_MATNR.
*& S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
WHERE WERKS EQ P_WERKS
AND MATNR IN S_MATNR
AND DISPO IN S_DISPO
AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
EXIT.
ENDIF.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND WERKS EQ P_WERKS
AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
EXIT.
ENDIF.
LOOP AT I_MARC.
MOVE-CORRESPONDING I_MARC TO I_OUT.
CLEAR MARC.
SELECT SINGLE MATNR MBRSH MEINS FROM MARA
INTO CORRESPONDING FIELDS OF MARA
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MARA-MBRSH TO I_OUT-MBRSH,
MARA-MEINS TO I_OUT-MEINS.
ELSE.
CONTINUE.
ENDIF.
SELECT SINGLE MATNR MAKTX FROM MAKT
INTO CORRESPONDING FIELDS OF MAKT
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MAKT-MAKTX TO I_OUT-MAKTX.
ELSE.
CONTINUE.
ENDIF.
LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
MOVE: I_MARD-LABST TO I_OUT-LABST,
I_MARD-LGORT TO I_OUT-LGORT.
APPEND I_OUT.
ENDLOOP.
LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
I_MVKE-VTWEG TO I_OUT-VTWEG.
APPEND I_OUT.
ENDLOOP.
CLEAR I_OUT.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\matstk.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = I_OUT.
*& T O P - O F - P A G E *
TOP-OF-PAGE.
WRITE:/ 'DATE:' ,SY-DATUM.
*& E N D - O F - P A G E *
END-OF-PAGE.
WRITE: / SY-ULINE,
/100 'PAGNO: ',SY-PAGNO,
SY-ULINE.
*& E N D -- O F -- S E L E C T I O N *
END-OF-SELECTION.
LOOP AT I_OUT.
AT FIRST.
WRITE :/ 'MATERIAL EXTRACTION REPORT',
SY-ULINE.
ENDAT.
WRITE:/ SY-VLINE,
I_OUT-MATNR,SY-VLINE,
I_OUT-MEINS,SY-VLINE,
I_OUT-WERKS,SY-VLINE,
I_OUT-LVORM,SY-VLINE,
I_OUT-PSTAT,SY-VLINE,
I_OUT-DISPO,SY-VLINE,
I_OUT-MBRSH,SY-VLINE,
I_OUT-MAKTX,SY-VLINE,
I_OUT-VKORG,SY-VLINE,
I_OUT-VTWEG,SY-VLINE,
I_OUT-LGORT,SY-VLINE,
I_OUT-LABST,SY-VLINE.
TOT = TOT + I_OUT-LABST.
AT NEW MATNR.
WRITE : 'NEW RECORD',
SY-VLINE.
ENDAT.
AT END OF LABST.
WRITE : 'STOCK = ',
TOT,
SY-VLINE,
SY-ULINE.
ENDAT.
AT LAST.
FORMAT COLOR 7 INTENSIFIED OFF.
WRITE : /159 'TOTAL STOCK = ',
TOT.
ENDAT.
ENDLOOP.
WRITE : /159 'TOTAL STOCK = ',
TOT.
regards,
srinivas
<b>*reward for useful answers*</b> -
How can i know the table fragments
Hi
How can i know the table is fragmented.
Thank youIf you're in 10g you could try use the Segment Advisor to identify various issues etc with your table. This will also provide recommendations on how to improve things.
(below script shamelessly stolen from the brilliant Oracle Base website)
-- segment_adv_table.sql
-- Use Segment Advisor to analyse a table.
-- Original Version
-- http://www.oracle-base.com/articles/10g/SpaceObjectTransactionManagement10g.php
-- owner is SCOTT
-- table is EMP
-- do a search/replace to change these 2 values and re-run it ;)
DECLARE
l_object_id NUMBER;
BEGIN
-- Create a segment advisor task for the SCOTT.EMP table.
DBMS_ADVISOR.create_task (
advisor_name => 'Segment Advisor',
task_name => 'EMP_SEGMENT_ADVISOR',
task_desc => 'Segment Advisor For EMP');
DBMS_ADVISOR.create_object (
task_name => 'EMP_SEGMENT_ADVISOR',
object_type => 'TABLE',
attr1 => 'SCOTT',
attr2 => 'EMP',
attr3 => NULL,
attr4 => 'null',
attr5 => NULL,
object_id => l_object_id);
DBMS_ADVISOR.set_task_parameter (
task_name => 'EMP_SEGMENT_ADVISOR',
parameter => 'RECOMMEND_ALL',
value => 'TRUE');
DBMS_ADVISOR.execute_task(task_name => 'EMP_SEGMENT_ADVISOR');
END;
-- Display the findings.
SET LINESIZE 250
COLUMN task_name FORMAT A20
COLUMN object_type FORMAT A20
COLUMN schema FORMAT A20
COLUMN object_name FORMAT A30
COLUMN object_name FORMAT A30
COLUMN message FORMAT A40
COLUMN more_info FORMAT A40
SELECT f.task_name,
f.impact,
o.type AS object_type,
o.attr1 AS schema,
o.attr2 AS object_name,
f.message,
f.more_info
FROM dba_advisor_findings f
JOIN dba_advisor_objects o ON f.object_id = o.object_id AND f.task_name = o.task_name
WHERE f.task_name IN ('EMP_SEGMENT_ADVISOR', 'USERS_SEGMENT_ADVISOR')
ORDER BY f.task_name, f.impact DESC; -
How can i know the RPM of my HD?
I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!Hi!!
It doesn't show...
Vendor: NVidia
Product: MCP79 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Those are the 2 texts...
Any idea?
Thanks!! -
How can i Know the email linked to icloud
Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank youWelcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
How can we know the affected reports when i remove object from universe
Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports) -
How can we know the format of report
Developed a web application using java SDK.
How can we know the format of report that is is it a crystal report , PDF or excel or hyperling.
If it is crystal report then i use openDoc and the report is opened but if its a hyperlink or PDf i am not able to open the report .
Please help.
ThanksCheck the si_kind or so_progid property of object. You can use oInfoObject.getKind() to retrieve that.
a crystal report would return crystalreport a pdf would return pdf etc. -
How can i know the number of lines in field-symbol internal table
how can i know the number of lines in field-symbol internal table
Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit -
How can i remove the end pice/pin from my headphones out of my computer?
how can i remove the end pice/pin of my headphones out of my computer?
IF you cannot pull it out with your finger tips, you need to take the machine in for service to an Apple Store or AASP. Doing this type of work yourself could seriously damage the computer so it's best left to professionals.
-
How can I know the name of instance (SID)?
Dear all,
After I install the Oracle client in my computer, I would like to change the tnsname.ora. However, I don't know the name of instance (SID) because I am not the one install the database and the DBA is gone. So, how can I know the SID name and the port number as well.
Best Regards,
amyHey,
The sid defaults to the database name.
http://www.adp-gmbh.ch/ora/misc/identifiers.html
you can find it by
select name from v$database;
or by
show parameter db_name (run this in sql prompt)
Run the above on the database server.
Maybe you are looking for
-
How I got sound out of my Audigy 2 in Bet
We all know how there's no drivers out yet for Vista Beta 2...so people are suggesting all kinds of things to try to get our SB cards to work... I have Vista Beta 2 Build 5384 installed and I have an Audigy 2 ZS card...and no matter what Audigy drive
-
Hi All, I am using box command to draw lines in main window in sap script.I am able to see the lines in print preview but not if take the print out. Please sugest. Thanks Mohit
-
Upgraded to iOS5, lost my photos and ringtones.
Photo app starts, has no folders, and quits after 2 sec. Ringtones are gone, will not restore from sync, and sync itself seems to bail out part way thru. I can find no backup on my computer. When taking a pic or vid with camera app, it "takes" but
-
Parallels Desktop - what is the speed impact?
My fuzzy impression (no numbers to confirm this) is that instead of the Mac being a full-blazing 2.33 GHz machine it maybe slows down to like a 1.8 - 1.9 GHz machine when a Windows XP VM is running in Parallels Desktop. When I suspend the VM things s
-
When I try to download a book it stalls at about 50% done then goes back to home page. I am not able to finish the download. How do I fix this issue?