How can I know the numbers of my podcast hits and downloads?
I need your help
iTunes does not provide statistics. The only way to tell is either to have logs from your server, or to use something like Feedburner which then uses a proxy for the URLs so it can count downloads (though this can present problens).
This page from Apple offers some information:
http://www.apple.com/itunes/podcasts/specs.html#tracking
This depends on it being possible to set up these facilities on your server. Note that tracking usage of the feed itself is pretty meaningless, since any subscriber's iTunes will check the feed at 15 minute intervals while iTunes is running.
Similar Messages
-
How can i know the numbers of records in a DB table
Hi,
I need something like describe for itab but for the db tables. Is there some easy way?
Thanks in advanceHi,
Use SELECT COUNT(*)..... Syntax.
Go through this link as well
Whis is best Select count or Describe ?
Regards,
Satish
Message was edited by:
Satish Panakala -
How can i know the RPM of my HD?
I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!Hi!!
It doesn't show...
Vendor: NVidia
Product: MCP79 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Those are the 2 texts...
Any idea?
Thanks!! -
How can i Know the email linked to icloud
Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank youWelcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
How can we know the affected reports when i remove object from universe
Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports) -
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
How can we know the format of report
Developed a web application using java SDK.
How can we know the format of report that is is it a crystal report , PDF or excel or hyperling.
If it is crystal report then i use openDoc and the report is opened but if its a hyperlink or PDf i am not able to open the report .
Please help.
ThanksCheck the si_kind or so_progid property of object. You can use oInfoObject.getKind() to retrieve that.
a crystal report would return crystalreport a pdf would return pdf etc. -
How can i know the number of lines in field-symbol internal table
how can i know the number of lines in field-symbol internal table
Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit -
How can I know the number of ejb instances
Hi all,
We need to know how can we get the number of ejb instances (entity and session) while the application is running.
We have a memory leak, so we need to know the amount opf memory used.
Please, it´s quite urgent, can anybody help us? It seems like an Oracle 9ias 903 bug.
ThanksI'm not sure if this will help you, but the "Spy" application that comes with OC4J stand-alone may help. I suggest you search this forum's archives for the words "Spy" and "AggreSpy".
Good Luck,
Avi. -
How can I know the name of instance (SID)?
Dear all,
After I install the Oracle client in my computer, I would like to change the tnsname.ora. However, I don't know the name of instance (SID) because I am not the one install the database and the DBA is gone. So, how can I know the SID name and the port number as well.
Best Regards,
amyHey,
The sid defaults to the database name.
http://www.adp-gmbh.ch/ora/misc/identifiers.html
you can find it by
select name from v$database;
or by
show parameter db_name (run this in sql prompt)
Run the above on the database server. -
How can I know the length of the image data section of a PSD file
I'm a C++ programmer developing a project to parse PSD files, and it's necessary to know whether there is a length field indicating the length of the image data in image data section of a PSD file, if not, how can I know the length?
Thank you.Sorry I can't help, maybe there is some information in the SDK?
http://www.adobe.com/devnet/photoshop/sdk.html
Or someone might be able to help in this forum?
http://forums.adobe.com/community/photoshop/photoshop_sdk -
How can I know the name of the file that the user has currently open ?
Hello
I'm developing a module for x3dv.
http://hiperia3d.blogspot.com/search/label/X3DV%20Module%20For%20Netbeans
I am going to add a button to open the files when I click it.
I just need to know how can I know the name of the file that the user has currently open in the editor. What variable holds it in Netbeans?
Thank you
JordiIf you are using the JFileChooser to open the document, I would create another class with this included:
//initiate class variables
private File f;
//create JFileChooser
JFileChooser fc = new JFileChooser();
fc.setMultiSelectionEnabled(false);
fc.setFileSelectionMode(JFileChooser.FILES_ONLY)
//set the chooser to initialise File f with the file selected
int status = fc.showOpenDialog(null);
if (status == JFileChooser.APPROVE_OPTION)
f = fc.getSelectedFile();
public File getFile()
return f;
} -
How can i know the size of client
hi
how can i know the size of client ?
SAP ECC6
OS AIX 5.2
DB ORACLE10g
regards
KaranHi,
1)Test run normal client copy .
=DDt will give the size.
2)There is SAP note for Client size analyse.
Here is 118823
3)run program YSTABSIZ.
Regards,
Muralidhar -
How can i know the port of my database?
hello,
how can i know the port of my database is working in?
tyuser11933068 wrote:
I don't know how to do this, sorry
:-(TNSNAMES.ORA is used by the client to resolve an alias to an actual server/listenr port/db service name.
TNSNAMES.ORA is found, by defualt, on the client machine at $ORACLE_HOME/network/admin
Here's how it works:
Suppose I have this in my tnsnames.ora:
fubar =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = btzlkfp)
)So, my connect string would look something like this:
$> sqlplus scott/tiger@fubarTNS will take the name 'fubar' and look it up in the tnsnames file. In my example, it will then route the connection request to 'myhost' (using other net services to resolve that to an actual IP address), and place the request on port 1521 at that server. The listener will pick that up and see that scott wants to log on to database 'btzlkpf'.
There's more, but at this stage I want you to understand the connection between what you enter for your connect string and the database itself. -
How can i know the no of servlets
how can i know the no of servlets present in single application
you webapp (servlet) can create a static variable. when a request has been made, you increment this number...provides a request parameter (http param) that will return this count number.
Maybe you are looking for
-
Where can I find a tutorial for editing iMovie on iPhone 4S
Where can I find a tutorial for editing iMovie on iPhone 4s
-
How to extract data for this tcode
Hello BW Experts, I have a transaction code in R/3. i observe that is a using a program P1 and structure S1 to generate the table display in the r/3 transaction. i go to se38 and display the code, it seems to be a module pool. Any suggestions for ext
-
How can I delete captions from a group of photos? Aperture 3.3
Is it possible to do it after having selected them all? I have 600 of them and I wouldn't like to do it one by one... Is that possible? Luca
-
What camcorder are you using with FCE that's compatible
I'd like to hear from folks so other folks know what's compatible and what is not. I know Apple has a list but it's outdated. old, and not comprehensive. By you stating what make & model your camcorder is and if it works with FCE will help a lot of f
-
How do I extend the amount of rings before it goes to message bank?
I have read you press the phone symbol and type #61# and press call on the keypad. Then on the text that appears on your screen on the forth line after the numbers you put the amount of seconds you want your phone to ring for. I don't have a forth l