How Can i know the orders source. ?? IDOC or VA01
Dear All,
sometimes we create a new order with reference to the order which was created by using IDOC.
How can I know the difference between ..
1) Order created with VA01. (Some of the fields may copied from order created by IDoc.)
2) orders created with IDOC.
Please let me know.
Thank you
Madhu
Thank you for your reply, but the suggestion you have given may work for us. as when we create a order with reference to other order or when we create a order using we19. the newly created order will have all the details of older order and that information will be in EDIDC, which will not be correct.
regards
madhu
Similar Messages
-
How can I control the order of playback on MuVu Mix (USB 2.
What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order?
Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play back.
I tried erasing all contents, then copying the files one by one to the MuVo Mix in the order that I want them to play back (name order). But that is not the order that the files play back.
By the way, in both case, I removed the ".dat" file first. (I also tried keeping the ".dat" file, to no avail.)SSR wrote:
> on the newer MuVos (which I would have thought included the Mix)
> it's filename order. Other than that it's hard to know, but it sounds
> like you ought to contact Support to check.
I did, and they confirmed (very quickly; kudos!) what you and I both expect: the play order is determined by the alphabetical order of the file names. The mistake was mine. I ass-u-me-d that the MSWin folder "Name ^" order was correct. I did not realize that it is not exactly alphabetical when the file name begins with a number (e.g, the track number). I had renumbered songs from a second CD by simply adding 00 to the track number. Thus, songs and 2 of the first CD are played after songs 08 and 09 of the second CD, as they should alphabetically, even though they appear in the order , 2, 08, 09 in the "Name ^" list. Klunk! Mea cupla! -
How can I change the order of the songs listed in a playlist?
How can I change the order of the songs listed in a playlist?
Hello Pokerplayer62,
In order to update the order of items in your playlists on the iPod Nano, you have to update them on the computer, and then sync the updated playlists to your device.
From the iPod Nano User guide here: http://manuals.info.apple.com/en_us/ipod_nano_features_guide.pdf
To set iTunes to update iPod nano automatically with selected playlists:
Open iTunes and select iPod nano in the Source list. Click the Options button and click Music.
Select “Automatically update selected playlists only.” Select the playlists you want.
All the best,
Sterling -
How can i know the price for iphone s5 in Middle East in Oman
hi..
please help me
i want to buy an iphone 5s. how can i buy it from apple store?
how can i know the real price for my country, aware that i am in Middle East exactly in Oman?
and how many time it will take to reach in my country Oman?
please help as soon as you can..
thank youAs I said, if you want to buy it from the USA online Apple store, you will need to have a credit card issued by an American Bank or financial company, you will have to have a USA billing address associated with that card, and you will have to have it shipped to a USA street address.
Aramax is a shipping company - you do not have a credit card from them and they cannot pay for your purchase. Having an account with a shipping company doesn't provide you with a USA source of payment for your purchase.
As I understand it, the Oman government does not allow the iPhone to be sold in Oman, there are no official service providers for it, and thus there is no legitimate source to buy an iPhone from within Oman.
Online Apple stores do not allow payment by foreign means or in foreign currency, they do not do currency exchange, nor do they ship internationally. -
In Function 'MD_STOCK_REQUIREMENTS_LIST_API'
we will get the material requirment order No. and their sub soure order No.
Fox example
if i find a PR, then i will also see 2 PRs as it's sub source.
But how can i relate the orders from function 'MD_STOCK_REQUIREMENTS_LIST_API'?
TKS a million~~Hi,
Can you please explain your need with a clear example, from your initial posting it is not quite clear what you're trying to link.
Regards,
Vivek -
How can i know the table fragments
Hi
How can i know the table is fragmented.
Thank youIf you're in 10g you could try use the Segment Advisor to identify various issues etc with your table. This will also provide recommendations on how to improve things.
(below script shamelessly stolen from the brilliant Oracle Base website)
-- segment_adv_table.sql
-- Use Segment Advisor to analyse a table.
-- Original Version
-- http://www.oracle-base.com/articles/10g/SpaceObjectTransactionManagement10g.php
-- owner is SCOTT
-- table is EMP
-- do a search/replace to change these 2 values and re-run it ;)
DECLARE
l_object_id NUMBER;
BEGIN
-- Create a segment advisor task for the SCOTT.EMP table.
DBMS_ADVISOR.create_task (
advisor_name => 'Segment Advisor',
task_name => 'EMP_SEGMENT_ADVISOR',
task_desc => 'Segment Advisor For EMP');
DBMS_ADVISOR.create_object (
task_name => 'EMP_SEGMENT_ADVISOR',
object_type => 'TABLE',
attr1 => 'SCOTT',
attr2 => 'EMP',
attr3 => NULL,
attr4 => 'null',
attr5 => NULL,
object_id => l_object_id);
DBMS_ADVISOR.set_task_parameter (
task_name => 'EMP_SEGMENT_ADVISOR',
parameter => 'RECOMMEND_ALL',
value => 'TRUE');
DBMS_ADVISOR.execute_task(task_name => 'EMP_SEGMENT_ADVISOR');
END;
-- Display the findings.
SET LINESIZE 250
COLUMN task_name FORMAT A20
COLUMN object_type FORMAT A20
COLUMN schema FORMAT A20
COLUMN object_name FORMAT A30
COLUMN object_name FORMAT A30
COLUMN message FORMAT A40
COLUMN more_info FORMAT A40
SELECT f.task_name,
f.impact,
o.type AS object_type,
o.attr1 AS schema,
o.attr2 AS object_name,
f.message,
f.more_info
FROM dba_advisor_findings f
JOIN dba_advisor_objects o ON f.object_id = o.object_id AND f.task_name = o.task_name
WHERE f.task_name IN ('EMP_SEGMENT_ADVISOR', 'USERS_SEGMENT_ADVISOR')
ORDER BY f.task_name, f.impact DESC; -
If i Know the Interface name of the badi ,how can i know the badi definitio
Hi Experts,
1. If i Know the Interface name of the badi ,how can i know the badi definition name?
2. And also if i know the name of the implimentation class,how can i know the implimantation name and definitin name
Thanks&Regards
Ramakrishna LHi,
in order to find BAdI definition starting from the interface, you should perform a "Where used List" from SE24.
Type your interface name and then, in the where used dialog box, tick the 'Business Add-in" check box.
1.But is there any table which stores Implimentation name and Implimentation class name?
2.And also any table that stores BADI Definitiion name and Implimentation names.
1. SXC_CLASS table; Exit, implementation side: Class assignment (multiple)
2. SXC_EXIT table: Exit: Implementation side: Assignment: Exit - Implementation
Regards,
Andrea -
How can I download the full source code for the Java 3D package
how can I download the full source code for javax.media.j3d
especially I need the Transform3D.java class.
thanks a lot
Meirthank you guys I'll try to do so, I suggest you to
join me.From the one of the (ex-!)Java3D team:
"I'm glad to see that Sun has decided to officially support an
open source Java/OpenGL binding, JOGL. Perhaps they will
eventually decide to make Java 3D open source. However, be
careful what you wish for. The Java 3D source is huge and
complex. There are native sections for Solaris, Windows/OpenGL,
and Windows/Direct3D, plus common code. I don't know how you'd
open source a build process that requires different pieces of
the code be built on different machines running different
operating systems."
Sounds scary - I hope we're ready for it :) -
How can I get the XSLT source code?
How can I get the XSLT source code?
Actually, I want to parse customer reviews for academic purpose.
I'm trying to follow the links in the customer reviews zone.
For example:
In the following page
http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E/sr=1-1/qid=1180473311/ref=cm_cr_dp_all_helpful/102-2890495-8864146?ie=UTF8&n=1065836&qid=1180473311&sr=1-1#customerReviews
in the "customer reviews" section, there is a link "next" that gets the next 10 reviews.
The thing is that I don't know how to imitate its action using java and actually, I'm not sure if it is possible to do that using software.
I tried to look at the source code that I got using the previous java code I posted and I see that the next link always has the following href attributes "http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E"
I tried to see if there is any javascript that tells the page which 10 reviews to get but with no success.
So if anyone knows how to imitate the next link action using software that will sure help me a lot.
Thanks in advance -
How can i know the RPM of my HD?
I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!Hi!!
It doesn't show...
Vendor: NVidia
Product: MCP79 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Those are the 2 texts...
Any idea?
Thanks!! -
How can i Know the email linked to icloud
Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank youWelcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
How can we know the affected reports when i remove object from universe
Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports) -
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
How can I change the order of phone numbers in a contact?
I have contacts that have more than one phone number (I am sure we all have those in this day and age). The importance of the phone numbers varies over time and I want to have the most important one as first on the list. How can I change the order that phone numbers are displayed within a contact?
Thanks for any help.Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.
-
How can we know the format of report
Developed a web application using java SDK.
How can we know the format of report that is is it a crystal report , PDF or excel or hyperling.
If it is crystal report then i use openDoc and the report is opened but if its a hyperlink or PDf i am not able to open the report .
Please help.
ThanksCheck the si_kind or so_progid property of object. You can use oInfoObject.getKind() to retrieve that.
a crystal report would return crystalreport a pdf would return pdf etc.
Maybe you are looking for
-
I was trying to figure out why there was a cricle with a lock image in it on the top of my phone , so i was going through settings and couldnt find anything that was out of ordinary .so then i was trying to make room for a software update.The only th
-
One song in my iPhone music list has "chasing arrows" next to it and won't sync
A recently purchased song won't sync from iTunes 10 to my iPhone 3GS. It looks normal in iTunes and plays correctly, but it doesn't appear on my iPhone, and when I look at the iPhone's music list under the "Devices" folder in iTunes when I have the p
-
Problems with EVGET not Returning Correct Results
We have several reports with EVGETs that are not working. It seems to be limited to gets on a particular datasrc when getting members at the base level. Here is an example. Application: Budgeting Deptid: D_07104 Account: A_612080 Product: P_070040
-
Problem in dbms_output.put_line boolean variable
hello guys m practicing PL/SQL when i try to exicute below code i get following error: DECLARE I BOOLEAN:=TRUE; BEGIN dbms_output.put_line(i); END; error: Error starting at line 1 in command: DECLARE I BOOLEAN:=TRUE; BEGIN dbms_output.put_line(i); EN
-
ImageView under ScrollView wont scroll - Xcode 4 IB
So I am using the Xcode 4.2.1 Interface Builder. I have embedded a Textview into a Scrollview, and it scrolls just fine. But when i insert an ImageView under the ScrollView, it wont scroll with everything else. While the text scrolls, the image is st