How can i know the size of client

hi
how can i know the size of client ?
SAP ECC6
OS AIX 5.2
DB ORACLE10g
regards
Karan

Hi,
1)Test run normal client copy .
=DDt will give the size.
2)There is SAP note for Client size analyse.
Here is 118823
3)run program YSTABSIZ.
Regards,
Muralidhar

Similar Messages

How can I know the size of DB Table

Hi, Guys,
1. How can I know the size of the DB Table in terms of kb
2. If I delete some records from the Table, does the actual size of the Table remains same or will it be reduced.
3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
thanks
Mahesh

Hi
1. How can I know the size of the DB Table in terms of kb
There is no precise method/tcode/program to know the Table size of a tables.
Just based on the record size of a table(say for example 2kb), and if 200 records are there then, we roughly assume that it occupied 400 kb.
All the tables are stored in Table spaces.
2. If I delete some records from the Table, does the actual size of the Table remains same or will it be reduced.
Time being it remains same. it won't get reduced immediately
during some next DB reorganisation it gets reorganised by reducing it.
3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
during next DB reorganisation it gets reorganised by reducing it.
Reward points if useful
Regards
Anji

How can i know the size of ResultSet???

i run a statment
ResultSet rs = cs.executeQuery();
rs.next();
rs.getString(i) ; <-------------------- how can i know what is the max i can i get???????
i didn't find function that returns the size of it !!!!!!!!!!
any one can help me

u want to know the number of rows returned or size of columns?

How can we know the size of the dimension(in Line item Dim)?

Hi to all experts,
We use Line item dimension if the size of dimension is 20% or more of the fact table. My doubt is that how can v know that the size of the dimesion is 20% or more of FT?. But we never store MD in dimension tables......So please help me to understand this scenario? Thanks in advance.

Hi
Normally before modelling you will assume the number of entries in your master data and transactional data..
If your dimension is having 3 characteristics
say A,B .....and these characteristic values are say
A---10,000( Total number of master data records)
B----7,000( Total number of master data records)
then your dimenstion would be 10,000 * 7,000 =700000000
in this case you better keep A in a dimension and B in another dimension.
Normally SAP recommends your dimension table shouldnot exceed 100,000...
so whenever you expect a characteristic is having more values then you should make it as line item...
If you want to add a new characteristic to the existing model then you can decide by comparing the ratio of dimension table to the fact table..
Please have a look at the below url for sizes
dimension size
Hope it helps
Thanks,
Teja
Edited by: Teja badugu on Apr 24, 2008 12:19 PM

How can I know the size of a JViewport laid out in BorderLayout.CENTER?

I have a JPanel inside a JScrollPane. The scroll pane is laid out inside of BorderLayout.CENTER. I need to know the size of the JViewport to do stuff like centering and zooming.
Where can I find the size? All these methods return 0 values for X and Y:
myScrollPane.getViewport().getSize()
myScrollPane().getSize()
myScrollPane.getHorizontalScrollbar().getValue()
Yes, even the scrollbars won't give me any values! It's all because of the BorderLayout!
Any ideas? Thanks.

Sounds like you are accessing the sizes before the views are realized (that is before a call to frame.pack()/show()) They are available only after the layoutManager had a go on it. What is available earlier are preferred/min/max, though.
Greetings
Jeanette

How can we know the size of the partition

HI,
can any one give me a query or procedure to know the size of a partition in a table in bytes
Thanks in advance

user8884944 wrote:
HI,
can any one give me a query or procedure to know the size of a partition in a table in bytes
Thanks in advanceQuery dba_segments
select bytes, segment_name, partition_name from dba_segments
where segment_name = 'Table_name' and partition_name = 'Name of partition'
and owner = 'Owner'Regards
Anurag

How urgent:how can we know the size of a record from result set

hi proffesionals i attend on problum with arrangment,for that what i am doing is i am fetching datas from database and printing in a row vertically.it is not looking good.i want to print it horizontaly like
ae00023 as3333 a6556 a457864 a6576
ae00025 as3336 a6556 a457866 a6578
i wrote the coding like
<%while(resultsetdisplay.next())
{%>
// try to print the datas in horizontal way
<tr>
for (int i=index;i<resultsetdisplay.getFetchSize()-10;i--)
<td class=display><%=resultsetdisplay.getObject(4)%></td>
int i=index;
</tr>
<%}%>
is it prints horizontaly.
help me soon

Hi
You can the Meta Data for the result set and then get the getColumnCount() from the MataData to get the number of columns in the resultset.
Bye

How can I view the size of a particular event in iPhoto '11?

How can I view the size of a particular event in iPhoto '11? The 'Get Info' option is not displaying the size of the event like it used to in iPhoto 8.

But the event does not really have a size - you can export the photos and make the size pretty much what you want - while it is in iPhoto it is an event
I guess that iPhoto could report the size of the original photos as imported - or the size of the modified photos if exported as JPEGs - or the size of the modified photos if exported with a maximum dimension of 1080 - but the event simply is photos and does not have a "size" until you export it
Obviously you want to know the size but the question was
what is your puprose for knowing the size?
WIth that information maybe there is a way to get you what you want
But the basic answer is simply that an event does not have a size - an event is a collection of photos and each photo has either two or three versions in the iPhoto library and each photo can be exported for outside use in several formats and at any size
LN

I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto

I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto.

What format are they? Tiif? Jpeg? You can compress them with a lot of apps - including Preivew and just about any graphics editor out there. I'm not sure that 45mb would crash iPhoto thogh, are yo sure that's the cause? I know that some folks have mentioned pixel dimensions causing issues, as can color profiles.
Regards
TD

How can i know the number of lines in field-symbol internal table

how can i know the number of lines in field-symbol internal table

Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit

How can I know the name of instance (SID)?

Dear all,
After I install the Oracle client in my computer, I would like to change the tnsname.ora. However, I don't know the name of instance (SID) because I am not the one install the database and the DBA is gone. So, how can I know the SID name and the port number as well.
Best Regards,
amy

Hey,
The sid defaults to the database name.
http://www.adp-gmbh.ch/ora/misc/identifiers.html
you can find it by
select name from v$database;
or by
show parameter db_name (run this in sql prompt)
Run the above on the database server.

How can i know the port of my database?

hello,
how can i know the port of my database is working in?
ty

user11933068 wrote:
I don't know how to do this, sorry
:-(TNSNAMES.ORA is used by the client to resolve an alias to an actual server/listenr port/db service name.
TNSNAMES.ORA is found, by defualt, on the client machine at $ORACLE_HOME/network/admin
Here's how it works:
Suppose I have this in my tnsnames.ora:
fubar =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = btzlkfp)
)So, my connect string would look something like this:
$> sqlplus scott/tiger@fubarTNS will take the name 'fubar' and look it up in the tnsnames file. In my example, it will then route the connection request to 'myhost' (using other net services to resolve that to an actual IP address), and place the request on port 1521 at that server. The listener will pick that up and see that scott wants to log on to database 'btzlkpf'.
There's more, but at this stage I want you to understand the connection between what you enter for your connect string and the database itself.

How can I decide the size of HANA server when using DMO of SUM ?

Hi expert,
I want to execute DB migration from MS SQL to SAP HANA by using DMO of SUM.
So I have a question.
How can I decide the size of HANA server when using DMO of SUM ?
Now I have MS SQL in windows server.
But in order to use HANA , I have to prepare Linux server.
I want to know How can I decide the size of this Linux server.
Can I expect the function of data compression in HANA ?
Thanks in advance .
Kazuki.

Kazuki,
Please take attetion:
Your linux box already created = Application server:
Application Server
Based on the measurements SAP doesn't expect any changes concerning CPU, memory and network requirements for the ABAP application server. This means that the existing hardware and network infrastructure can still be used. Please check the PAM (www.service.sap.com/pam) for further details.
SAP HANA Appliance ( porvided by your hardware partner)
Consider SAP Note recommendation for HANA Main Memory, HANA CPU and HANA Disk Space.
Regards,
Edinaldo Junior

How can I reduce the size of the jvm?

I would like to decrease the size of a jvm; I've found a program that makes it, but you don't know how does it works (and you have to pay for it), I'm talking about VM Optimizer 2.0, from Invirtus.
Can anyone tell me how can I reduce the size of the jvm?
Thanks a lot.

I assume you mean the size of a JVM instance in memory and not the size of the JRE which is on the disk.
I don't believe that there is any way at present for your Java code to change the amount of memory available to the JVM. This shouldn't matter too much, though. Firstly, you can control the size of the JVM from the command prompt with the -Xms and -Xmx options. Secondly, any remotely reasonable operating system is going to wait until the JVM has requested memory before allocating all of it. If you start a JVM with a 2Gb heap, it does not occupy 2Gb of physical memory straight away.
Finally, I did a Google on InVirtus VM Optimizer and must request some information. What does that software have to do with Java? It's designed to reduce the size of a virtual computer as created by a prorgam such as VMWare. It has nothing to do with the Java virtual machine.

How can we know that size of dimension is more than fact table?

how can we know that size of dimension is more than fact table?
this was the question asked for me in interview

Hi Reddy,
This is common way finding the size of cube or dimensions or KF.
Each keyfiure occupies 10 Bytes of memory
Each Char occupies 6 Bytes of memory
So in an Infocube the maximum number of fields are 256 out of which 233 keyfigure, 16 Dimesions and 6 special char.
So The maximum capacity of a cube
= 233(Key figure)10 + 16(Characteristics)6 + 6(Sp.Char)*6
In general InfoCube size should not exceed 100 GB of data
Hope it answer your question.
Regards,
Varun

How can i know the size of client

Similar Messages

Maybe you are looking for