How can I know the total size of a playlist ?

I can't find anymore the size of a playlist in mb or gb. There are only the number of elements and the days but no more the actual size...
I tried to switched the presentation mode but I still cannot find it.

Thanks. That answers my question. It's jut not obvious that clicking at the header of the first column will restore the established sequence. Even if the listing is re-sorted by artist name or album title, the left column still lists as 1, 2, 3....25 instead of 18, 12, 5, 3... or whatever the different sorting has done to your desired track sequence. The behavior of the numbers in the column makes it look more like a simple track count. It would be nice if there was a "track count" column and a "play order" column whereby if you click on Copy To Play Order off the right click, the "play order" is renumbered to match the "track count" column according to however you currently have the tracks listed. Anyhow, question answered. Many thanks!

Similar Messages

How can i see the total size of files which i have been selected?

I want move my files including movies and photo to the tumpdrive.
But, my tumpdrive told me which was only 500MB space.
Therefore, i decided that choose some movies and photo to there.
When i chose the files i don't know how much of the total size which i've been selected.
if above 500MB, i could move.

With them selected, press the Option, Command, and I keys.
(75125)

How can I get the total size of my disk and each partition's information?

I am new to Solairs9. I use the format utility to list my partitions, but there are many unassigned partitions. I pasted the format response below:
# format
AVAILABLE DISK SELECTIONS:
0. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000011c6413e10,0
Specify disk (enter its number): 0
format> partition
partition> print
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 302 - 13482 63.96GB (13181/0/0) 134129856
1 swap wu 0 - 301 1.47GB (302/0/0) 3073152
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 home wm 13483 - 14086 2.93GB (604/0/0) 6146304
The part number from 3 to 6 are unassigned. What does this mean? How much space of these unassigned partitions? How can I mount these unassigned partitions to my local directories?
Thanks.

The important detail is the cylinders not the partition numbers. The partitions are simply slots where cylinder space can be assigned if its available.
The backup partition (2) represents the whole disk and shows you have 14086 cylinders available.
But you'll notice that all of those cylinders are already assigned to various partitions. So there is no free space available.

Error Message Said to Use Dual-Layer Disc - How Can I Know the File Size?

This is my first attempt at using iMovie. I used slides, added a music and speaking track over it.
I would like to reduce the size to a standard DVD rather than using expensive dual-layer discs. How do I determine the size?
My Mac is only 80 GB, is that a problem?
Thanks,
Carlos Marques

It seems as if perhaps you've clicked, in iMovie, on 'File' and 'Burn Project to Disc...' instead of Exporting to iDVD.
When you Export to iDVD, your project ought to easily fit on a DVD.
But if you've chosen 'Burn Project to Disc...' that doesn't make a playable DVD ..it creates a backup data disc, and, as Fred suggests, if you're using large or detailed photos, that may need a lot of space ..much more than when using iDVD to make a playable video disc.
(..iDVD compresses everything so that anything up to one or two hours' worth will fit on a 4.7GB DVD, as Fred described. Burning a Project to a disc just copies all the data that's in your iMovie project without compressing anything; without converting hi-resolution photos to the low resolution of a movie. That may be why it's suggesting that you need a Dual-Layer disc if you did choose 'Burn Project to Disc...' by mistake..)

How can I calculate the total size of my email messages?

I have an iMac and MacBook Pro. I use Apple's Mail application on each computer and have three email accounts that are feeding into it. I currently synchronize everything through MobileMe. I want to know how to calculate how many MB (probably several GB!) of space my email messages are now using, as I want to upgrade to Lion on the two computers and will soon be getting a 32BG iPad on which I would like to use the Mail application as well. I'd like to know in advance if I need to pay for more than the 5GB of free storage that iCloud will give me before making these changes, as I don't want to lose my email messages. For various reasons, I'd prefer not to go the route of archiving the messages. I can't figure out how to calculate how much space the messages are currently using.

The important detail is the cylinders not the partition numbers. The partitions are simply slots where cylinder space can be assigned if its available.
The backup partition (2) represents the whole disk and shows you have 14086 cylinders available.
But you'll notice that all of those cylinders are already assigned to various partitions. So there is no free space available.

How can i know the size of client

hi
how can i know the size of client ?
SAP ECC6
OS AIX 5.2
DB ORACLE10g
regards
Karan

Hi,
1)Test run normal client copy .
=DDt will give the size.
2)There is SAP note for Client size analyse.
Here is 118823
3)run program YSTABSIZ.
Regards,
Muralidhar

How can I know the size of DB Table

Hi, Guys,
1. How can I know the size of the DB Table in terms of kb
2. If I delete some records from the Table, does the actual size of the Table remains same or will it be reduced.
3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
thanks
Mahesh

Hi
1. How can I know the size of the DB Table in terms of kb
There is no precise method/tcode/program to know the Table size of a tables.
Just based on the record size of a table(say for example 2kb), and if 200 records are there then, we roughly assume that it occupied 400 kb.
All the tables are stored in Table spaces.
2. If I delete some records from the Table, does the actual size of the Table remains same or will it be reduced.
Time being it remains same. it won't get reduced immediately
during some next DB reorganisation it gets reorganised by reducing it.
3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
during next DB reorganisation it gets reorganised by reducing it.
Reward points if useful
Regards
Anji

How can u know the process chain total time, individual time?

Hi guru's
How can u know the process chain total time, individual time?
and what options will available in sm37?
Thanks
prabha reddy

Hi Prabha
Iam not very sure about total time and individual times.
But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status 2.start date & time 3. Log ID of each process chain.
or you can go to log view of particular individual chain to know how long it has run.
SM37: tcode for simple job selection.
here you check the status of job.
you can select for certain conditions like
1. scheduled
2. released
3. ready
4.active
5. cancelled
Assign points if it was helpful
Revert back if you need further info/
regards
AP

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Yes you can buy whatever you want if your credit card is in good standing.
Before you buy, read the size of the download in iTunes/App/iBook Store.
Rule of thumb, you need to reserve about 10% of your total space.

Hi experts . how can we know the stock details for a perticular plant?

hi experts . how can we know the stock details for a perticular plant

check this code
REPORT YSG_MATSTK_REP    LINE-SIZE 220
                          LINE-COUNT 50(5).
*&                       DATA DECLARATION                              *
TABLES: MARA,              "GENERAL MASTER DATA
        MARC,              "PLANT DATA FOR MATERIAL
        MARD,              "STORAGE LOCATION DATA FOR MATERIAL
        MBEW,              "MATERIAL VALUATION
        MVKE,              "SALES DATA FOR MATERIAL
        MAKT.              "MATERIAL DESCRIPTION
DATA: BEGIN OF I_MARA OCCURS 0,
           MATNR LIKE MARA-MATNR,"MATERIAL NUMBER
           MBRSH LIKE MARA-MBRSH,"INDUSTRY SECTOR
           MEINS LIKE MARA-MEINS,"BASE UNIT OF MEASURE
      END OF I_MARA.
DATA: BEGIN OF I_MARC OCCURS 0,
          MATNR LIKE MARC-MATNR,"MATERIAL NUMBER
          WERKS LIKE MARC-WERKS,"PLANT
          LVORM LIKE MARC-LVORM,"FLAG MATERIAL FOR DELETION AT PLANT
                                "LEVEL
          PSTAT LIKE MARC-PSTAT,"MAINTENANCE STATUS
          DISPO LIKE MARC-DISPO,"MRP CONTROLLER
      END OF I_MARC.
DATA: BEGIN OF I_MAKT OCCURS 0,
           MATNR LIKE MAKT-MATNR,"MATERIAL NUMBER
           MAKTX LIKE MAKT-MAKTX,"MATERIAL DESCRIPTION
      END OF I_MAKT.
DATA: BEGIN OF I_MVKE OCCURS 0,
           MATNR LIKE MVKE-MATNR,"MATERIAL NUMBER
           VKORG LIKE MVKE-VKORG,"SALES ORGANIZATION
           VTWEG LIKE MVKE-VTWEG,"DISTRIBUTION CHANNEL
      END OF I_MVKE.
DATA: BEGIN OF I_MARD OCCURS 0,
           MATNR LIKE MARD-MATNR,"MATERIAL NUMBER
           LGORT LIKE MARD-LGORT,"STORAGE LOCATION
           LABST LIKE MARD-LABST,"VALUATED STOCK WITH UNRESTRICTED USE
      END OF I_MARD.
DATA: BEGIN OF I_OUT OCCURS 0,
        MATNR LIKE MARC-MATNR,
        WERKS LIKE MARC-WERKS,
        LVORM LIKE MARC-LVORM,
        PSTAT LIKE MARC-PSTAT,
        DISPO LIKE MARC-DISPO,
        MBRSH LIKE MARA-MBRSH,
        MEINS LIKE MARA-MEINS,
        MAKTX LIKE MAKT-MAKTX,
        VKORG LIKE MVKE-VKORG,
        VTWEG LIKE MVKE-VTWEG,
        LGORT LIKE MARD-LGORT,
        LABST LIKE MARD-LABST,
      END OF I_OUT.
DATA : TOT TYPE I. " TOT - TOTAL TO PRINT STOCK
*&                   S E L E C T I O N - S C R E E N                   *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
                S_DISPO FOR MARC-DISPO.
SELECTION-SCREEN END OF BLOCK B1.
*&                  I N I T I A L I Z A T I O N                      *
INITIALIZATION.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
S_MATNR-LOW = 'M-14'.
S_MATNR-HIGH = 'M-18'.
P_WERKS = '3000'.
S_LGORT-SIGN = 'I'.
S_LGORT-OPTION = 'EQ'.
S_LGORT-LOW = '0001'.
S_LGORT-HIGH = '0004'.
S_DISPO-SIGN = 'I'.
S_DISPO-OPTION = 'EQ'.
S_DISPO-LOW = '001'.
S_DISPO-HIGH = '002'.
APPEND S_DISPO.
APPEND S_LGORT.
APPEND S_MATNR.
CLEAR S_DISPO.
CLEAR S_LGORT.
CLEAR S_MATNR.
*&             S T A R T - O F - S E L E C T I O N                     *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
                      WHERE WERKS EQ P_WERKS
                      AND MATNR IN S_MATNR
                      AND DISPO IN S_DISPO
                      AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
    EXIT.
ENDIF.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
                      FOR ALL ENTRIES IN I_MARC
                      WHERE MATNR = I_MARC-MATNR
                      AND WERKS EQ P_WERKS
                      AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
    EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
                      FOR ALL ENTRIES IN I_MARC
                      WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
    EXIT.
ENDIF.
LOOP AT I_MARC.
    MOVE-CORRESPONDING I_MARC TO I_OUT.
    CLEAR MARC.
    SELECT SINGLE MATNR MBRSH MEINS FROM MARA
                     INTO CORRESPONDING FIELDS OF MARA
                     WHERE MATNR = I_OUT-MATNR.
    IF SY-SUBRC = 0.
      MOVE: MARA-MBRSH TO I_OUT-MBRSH,
            MARA-MEINS TO I_OUT-MEINS.
    ELSE.
      CONTINUE.
    ENDIF.
    SELECT SINGLE MATNR MAKTX FROM MAKT
                    INTO CORRESPONDING FIELDS OF MAKT
                    WHERE MATNR = I_OUT-MATNR.
    IF SY-SUBRC = 0.
      MOVE: MAKT-MAKTX TO I_OUT-MAKTX.
    ELSE.
      CONTINUE.
    ENDIF.
    LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
      MOVE: I_MARD-LABST TO I_OUT-LABST,
            I_MARD-LGORT TO I_OUT-LGORT.
      APPEND I_OUT.
    ENDLOOP.
    LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
      MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
            I_MVKE-VTWEG TO I_OUT-VTWEG.
      APPEND I_OUT.
    ENDLOOP.
    CLEAR I_OUT.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME = 'C:\matstk.TXT'
   FILETYPE                        = 'ASC'
TABLES
    DATA_TAB                        = I_OUT.
*&                  T O P - O F - P A G E                              *
TOP-OF-PAGE.
WRITE:/ 'DATE:' ,SY-DATUM.
*&                  E N D - O F - P A G E                              *
END-OF-PAGE.
WRITE: / SY-ULINE,
         /100 'PAGNO: ',SY-PAGNO,
         SY-ULINE.
*&        E N D -- O F -- S E L E C T I O N                           *
END-OF-SELECTION.
LOOP AT I_OUT.
    AT FIRST.
      WRITE :/ 'MATERIAL EXTRACTION REPORT',
               SY-ULINE.
    ENDAT.
    WRITE:/    SY-VLINE,
               I_OUT-MATNR,SY-VLINE,
               I_OUT-MEINS,SY-VLINE,
               I_OUT-WERKS,SY-VLINE,
               I_OUT-LVORM,SY-VLINE,
               I_OUT-PSTAT,SY-VLINE,
               I_OUT-DISPO,SY-VLINE,
               I_OUT-MBRSH,SY-VLINE,
               I_OUT-MAKTX,SY-VLINE,
               I_OUT-VKORG,SY-VLINE,
               I_OUT-VTWEG,SY-VLINE,
               I_OUT-LGORT,SY-VLINE,
               I_OUT-LABST,SY-VLINE.
    TOT = TOT + I_OUT-LABST.
    AT NEW MATNR.
      WRITE : 'NEW RECORD',
               SY-VLINE.
    ENDAT.
    AT END OF LABST.
      WRITE : 'STOCK = ',
               TOT,
               SY-VLINE,
               SY-ULINE.
    ENDAT.
    AT LAST.
      FORMAT COLOR 7 INTENSIFIED OFF.
      WRITE : /159 'TOTAL STOCK = ',
                 TOT.
    ENDAT.
ENDLOOP.
    WRITE : /159 'TOTAL STOCK = ',
                 TOT.
regards,
srinivas
<b>*reward for useful answers*</b>

How can I change the page size of a scanned PDF document?

How can I change the page size of a scanned PDF document?
I scanned a 50-page document with an HP 5610xi All-In-One using the software that comes with it: HP Scan Pro. Though the physical document has standard 8.5" x 11" pages, the PDF resulting from scanning has page size set to 35.42 × 48.67 inches (according to Preview's "Tools > Inspector". I want to resize the pages to 8.5" x 11". Shouldn't Preview be able to do that with "Tools > Adjust Size..."? When I try, the menu option is grey so I can't select it.
I'm using Preview Version 4.2.

Thanks for the insight; that explains why it's the wrong size. I selected 300dpi scanning (which is the default, actually), but HP Scan Pro evidently created a PDF with 72dpi indicated. I want it fixed because I want to distribute the file to other people and have them able to print or display it without problems.
I still don't know why Preview won't let me change it, but your question about whether I wanted to print it did lead me to find a workaround: "File > Print" and "Save as PDF..." saved it with the correct page size.

How can i know the number of lines in field-symbol internal table

how can i know the number of lines in field-symbol internal table

Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output?

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output? Is there any other ways of achieving this?

wongrayd wrote:
Thanks. I do not have the experience on burning discs from iMovie for the movie after editing (ie for video discs players). It seems that i cannot find the relevant command in the tool bar for this purpsoe. Would you please show me the way?
The command is gone because iDVD has been discontinued by Apple. After Apple discontinued iDVD they removed the iDVD burning link from iMovie. I still use iDVD sometimes, only because I have an old copy.
wongrayd wrote:
You have mentioned about Handbrake as a converter. What is the RF no. (under Constant Quality) meant? It seems that the smaller the no. is, the better quality will be. What is the optimal no.? or should we use the Average Bitrate? Again, what is the best rate? Furthermore, which format is more suitable or the best: H264 or mpeg 2/4?
I don't know what RF means. When I have used HandBrake, I've used presets that apply to what I want to do, so I don't know the meaning of each individual setting. However, it appears that many of them are listed in the HandBrake User's Guide that is linked from the Help menu in the program:
https://trac.handbrake.fr/wiki/HandBrakeGuide
wongrayd wrote:
For iMac, except iMovie, what other software is the best for the amateur? I have read Photoshop. Can this support m2ts files and user friendly?
Photoshop is not amateur-level software, and although it can edit a video, it cannot burn a DVD. Unfortunately, because I still use iMovie, I haven't tried anything else. You might want to read the reviews of various DVD-burning applications in the Mac App Store.
And maybe another forum member will jump in and help us here!

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can I know the total size of a playlist ?

Similar Messages

Maybe you are looking for