How can I know which application is running in gnome 3

In the gnome 2 ,the running application is showed in the panel,
but  in gnome 3,there is no panel
I know that  i can switch to overview by pressing super key(windows key), but I think it is too inconvenient .

I use Gnome Do in the "Docky" mode
see here : http://do.davebsd.com/wiki/Docky

Similar Messages

  • How can I know which applications were opened by someone else who used my computer?

    I'd like to know how to interpret the logs that I get in Console to figure out which applications and which files were opened by someone who used my computer. Thanks for any help you might be able to offer!

    If you go to Settings > General > About > Diagnostics & Usage > Diagnositic & Usage Data you can see what was used if it returns an error of any kind.

  • How can I know what apps are running in the background of Q10

    My battery is not lasting more than 12 hours even though I'm moderately using it. How can I tell which applications are running in the background?

    As of now, the BB10 does not allow any apps to run in the background unless they are baked in the OS or in the active frames. So if an app is not in a active frame, no app is running in the background. try maximizing your battery by switching to wif whenever you have a wifi network.
    Twitter: @ukmight
    1. Click on the " Like " button if you find anything helpful posted.
    2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

  • How can we know WD Appl is running from portral or normal

    Hi Experts,
    Could any body help in this...
    How can we know one application is running from portal or normal application??
    Thanks,
    kris..

    Hi,
    Below code might help you.
    data: lo_api_component    TYPE REF TO if_wd_component,
      lv_cl_environment   TYPE        i,
    lo_wd_application   TYPE REF TO if_wd_application.
    * get application environment: portal or non-portal environment
      lo_wd_application = lo_api_component->get_application( ).
      lv_cl_environment = lo_wd_application->get_client_environment( ).
      IF lv_cl_environment = if_wd_application=>co_client_environment-portal.
    endif.
    Thanks,
    Kranthi.

  • How can i know which version of Smartview is installed on my system ?

    Hi All,
    How can i know which version of Smartview is installed on my system ?

    Do you know what version of Essbase you are running? that could help. You can find that in EAS. Right click on the server name and select edit ptoperties, then look on the environment tab. As a final measure, find the smartview.exe on yout machine right click and select properties. in one of the tabs there might be a version number

  • How can I know which clients are connected to my network through express and which are connected through extreme?

    I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
    Here you can see both routers:
    I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
    Below, one can see the summary of the config for both routers.
    Would somebody explain it?
    Thanks,
    Marcelo
    Message was edited by: Marcelão

    please disregard this answer.
    Message was edited by: Marcelão

  • How can I know which link was clicked in the link list

    Hi everyone
    I'm using list of links in my page to display list of the files in some directory.
    How can I know which link user was clicked. There are some code:
    <%
    String dir = "..//files//";
    File fin = new File(dir);
    File files[]=fin.listFiles();
    for(int i=0;i<files.length;i++)
    File x = files;
    %>
    <%=x.getName()%><br>
    <%
    %>
    Please help

    You need to pass some data on the querystring to the page you are linking to.
    <a href="Main_Work.jsp?file=<%=x.getName()%>"><%=x.getName()%></a><br>
    This will send a parameter called "file" with the value of the file name that the user clicked.
    Now in Main_Work.jsp you can access this data as follows:
    <%
    String s = request.getParameter("file");
    File f = new File("..//files//"+s);
    %>

  • How can i know which index will be used when executing the query ?

    1 ) I have query in which i have 3-4 tables but there multiple index on one column .
    so how can i know which index will be used when executing the query ?
    2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
    3) Please Provide me some document of EXplain plan ?

    Hi Jimmy,
    Consider the below example
    /* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
    CREATE TABLE FIRST AS
    SELECT * FROM all_objects;
    UPDATE FIRST
    SET object_name = 'TEST'
    WHERE owner != 'SCOTT';
    CREATE INDEX idx_first ON FIRST(object_name);
    SELECT *
    FROM FIRST
    WHERE object_name = 'TEST';
    It has not used index
    Execution Plan
    Plan hash value: 2265626682
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
    |* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
    /* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
    SELECT *
    FROM FIRST
    WHERE object_name = 'emp';
    This has used the index
    Execution Plan
    Plan hash value: 1184810458
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
    | 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
    |* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
    From this we can come to the conclusion that, whether to use one index or not by oracle
    would also depend on the data which is present in the table. This has to be this way as
    we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
    scan, it would be a performance hit when it searches for the second query ie where object_name
    ='emp';
    2.
    If we have a query like below.
    select * from emp
    where upper(ename) = upper(:p_ename);
    Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
    Create index idx_ename on emp(upper(ename));
    Regards,
    Cool

  • How can I know which screen-group is?

    Hi experts!!
    I don't know how can I know which screen-group is associaciate to the values...for example, how can I associate  this block to a screen-group for after do this?  IF SCREEN-GROUP1 EQ 'DAT'.
    SELECTION-SCREEN BEGIN OF BLOCK B9 WITH FRAME TITLE TEXT-017.
    SELECTION-SCREEN SKIP.
    SELECT-OPTIONS: FECHA FOR P0001-BEGDA MODIF ID DAT.
    SELECTION-SCREEN END OF BLOCK B9.
    Thanks and regards,
    Rebeca

    Hi,
    Check out this code.
    REPORT  Z94406_TEST_123                         .
    TABLES: pa0001,t549a.
    DATA: n(6) TYPE c.
    SELECTION-SCREEN BEGIN OF BLOCK za2 WITH FRAME.
    PARAMETERS:p1  RADIOBUTTON GROUP grp1 user-command a DEFAULT 'X'.
    SELECT-OPTIONS: s_prd1 FOR n NO-EXTENSION modif id G1.
    PARAMETERS:p2  RADIOBUTTON GROUP grp1.
    SELECT-OPTIONS: s_period FOR pa0001-begda NO-EXTENSION modif id G2.
    SELECTION-SCREEN END OF BLOCK za2.
    AT SELECTION-SCREEN OUTPUT.
    if p1 = 'X'.
    LOOP AT SCREEN.
        IF screen-group1 = 'G2' or screen-group1 = 'G2'.
                screen-input = '0'.
          MODIFY SCREEN.
       ENDIF.
      ENDLOOP.
    ELSE.
      IF screen-group1 = 'G2' or screen-group1 = 'G2'.
          screen-input = '1'.
          MODIFY SCREEN.
       ENDIF.
      ENDLOOP.
       ENDIF.
    Regards,
    Syed

  • How can I know which photos are in the library was used in each album I have created before.

    How can I know which photos are in the library was used in each album I have created before?
    I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
    Is there any method to find this?
    Thanks.

    Album or Book?
    If Album you can find the ones not already used:
    File -> New Smart Album
    Album -> is not -> Any
    Regards
    TD

  • How can i know the servlet is running or not?

    Hi all,
           I have a doubt regarding servlet. I created one servlet and deployed in server. Now i called (RUN) the servlet from the browser. And it is running. Now can i know that the servlet is running or not in the server without seeing in the browser. Can we know the status of the servlet with its URL in the server whether it is running or not?
             Let me explain my problem. In my servlet it will run continously read one table and  do some operation depending on the entries in that table. Now i called the servlet from the browser. After some time i closed the browser. If browser is there i can know whether servlet is running or not. But now how can i know that servlet is running or not. Becoz eventhough we closed the browser the servlet will run in the background. How can i achieve this?
    Thanks and Regards,
    VJR.

    Hi!
    With first call, the servlet will be loaded, and it remains so until server-shutdown, but you need a timer-mechanism execute method calls continuously.
    Regards,
    Thomas

  • How can we know which index is triggered

    hi all ,
    how can we know which index is triggered in perticular select statement ? is that just based on the fields which used in the select statement or can we know from ST05 ?
    thanks,
    ram

    Hi Ram,
    You can go to transaction ST04(if you are authorised)...
    Now select 'Detail analysis menu' button.
    Now select SQL Request button under 'Resource consumption by' section.
    Now in the ' SQL statement pattern by ' field , give the part of the select statement you want to check.
    Now press execute.
    Now select the line item displayed and goto menu option <b>Goto->Explain SQL</b>.
    It will give you the execution plan for the particular SQL statement.
    From here you can get the index values from INDEX RANGE SCAN statement in this output.
    Hope this has been of some help to you...
    Regards,
    SP.

  • How can we know that JVM is running in our system?

    how can we know that JVM is running in our system?

    On a *dows system you can use pslist and the like:
    http://www.sysinternals.com/Utilities/PsTools.html
    http://www.sysinternals.com/Utilities/PsList.html

  • How can I know which file is using by the self-service workflow?

    Dear all:
    In my directory, there are two HRSSA.wft and How can I know which source is using by the workflow of the self-service ?
    my environment is oracle 11.5.9 | self-service 4.1 | workflow builder 2.6
    Thanks
    regards
    Terry

    One way would be to download the HRSSA workflow to a wft file (using the WFLOAD utility - see MOS Doc 578248.1), then comparing this downloaded wft file with the two files you have (using a utility such as diff in Unix). The comparison that reports no differences will identify the wft that was uploaded into the database.
    HTH
    Srini

  • How can I know which has brought down the database SI or SA

    Hi to all,
    Hi
    Sorry about this simple question but i am little bit confused.
    Suppose if i used Shutdown immediate and i use Shutdown abort then how can i know which brought down my database Shutdown immediate(SI) or Shutdown abort(SA)
    Please help me !!!!!

    Hi,
    Ofcourse shutdown abort will execute...
    See the output from alert log
    Tue Jun 01 11:54:17 2010
    Shutting down instance (immediate)
    Stopping background process SMCO
    Tue Jun 01 11:54:35 2010
    Shutting down instance: further logons disabled
    Tue Jun 01 11:54:39 2010
    Shutting down instance (abort)
    License high water mark = 125
    USER (ospid: 5436): terminating the instance
    Instance terminated by USER, pid = 5436
    Tue Jun 01 11:54:42 2010
    Instance shutdown complete
    Thanks,
    Ajikumar G
    Expertise in Oracle Apps...

Maybe you are looking for