How can I know which file is using by the self-service workflow?

Dear all:
In my directory, there are two HRSSA.wft and How can I know which source is using by the workflow of the self-service ?
my environment is oracle 11.5.9 | self-service 4.1 | workflow builder 2.6
Thanks
regards
Terry

One way would be to download the HRSSA workflow to a wft file (using the WFLOAD utility - see MOS Doc 578248.1), then comparing this downloaded wft file with the two files you have (using a utility such as diff in Unix). The comparison that reports no differences will identify the wft that was uploaded into the database.
HTH
Srini

Similar Messages

  • How can I know which link was clicked in the link list

    Hi everyone
    I'm using list of links in my page to display list of the files in some directory.
    How can I know which link user was clicked. There are some code:
    <%
    String dir = "..//files//";
    File fin = new File(dir);
    File files[]=fin.listFiles();
    for(int i=0;i<files.length;i++)
    File x = files;
    %>
    <%=x.getName()%><br>
    <%
    %>
    Please help

    You need to pass some data on the querystring to the page you are linking to.
    <a href="Main_Work.jsp?file=<%=x.getName()%>"><%=x.getName()%></a><br>
    This will send a parameter called "file" with the value of the file name that the user clicked.
    Now in Main_Work.jsp you can access this data as follows:
    <%
    String s = request.getParameter("file");
    File f = new File("..//files//"+s);
    %>

  • How can i determine which devices are used at the moment?

    Hi all,
    I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface.  I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
    Thanks,
    Omer
    Solved!
    Go to Solution.

    Hi Omer,
    so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
    GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
    That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How can I know which orb im using?

    Hello all
    im trying to move from javaIDL to jacORB in my application
    I point my class path to the jacORB.jar and it is first in the list
    how can I be sure im using jacORB and not javaIDL ?
    Because the declaration is the same in the code. (import org.omg.CORBA.ORB;)

    You need to set ORB properties.
    Not fammiliar with JacORB but Orbix case looks like:
    Properties props = new Properties();
    props.put("org.omg.CORBA.ORBClass", "IE.Iona.OrbixWeb.CORBA.ORB");
    props.put("org.omg.CORBA.ORBSingletonClass", "IE.Iona.OrbixWeb.CORBA.singletonORB");
    orb = ORB.init(args, props);
    Anyway, check JacORB docs.
    found this:
    p.put("org.omg.CORBA.ORBClass", "org.jacorb.orb.ORB");
    p.put("org.omg.CORBA.ORBSingletonClass", "org.jacorb.orb.ORBSingleton");
    Message was edited by:
    algr

  • How can I select which photo is used on the cover of an i-Photo book?

    I have created a photobook, and can do most things I need, but the photo selected by Autoflow for the cover is not the one I want. Can anyone tell me how to change it?

    You can drag any of your photos to the coverpage.
    Click onto the title page to select it and open the Photos Browser window, then drag the photo you want to use onto the title page.

  • How can I know which photos are in the library was used in each album I have created before.

    How can I know which photos are in the library was used in each album I have created before?
    I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
    Is there any method to find this?
    Thanks.

    Album or Book?
    If Album you can find the ones not already used:
    File -> New Smart Album
    Album -> is not -> Any
    Regards
    TD

  • How can i know which index will be used when executing the query ?

    1 ) I have query in which i have 3-4 tables but there multiple index on one column .
    so how can i know which index will be used when executing the query ?
    2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
    3) Please Provide me some document of EXplain plan ?

    Hi Jimmy,
    Consider the below example
    /* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
    CREATE TABLE FIRST AS
    SELECT * FROM all_objects;
    UPDATE FIRST
    SET object_name = 'TEST'
    WHERE owner != 'SCOTT';
    CREATE INDEX idx_first ON FIRST(object_name);
    SELECT *
    FROM FIRST
    WHERE object_name = 'TEST';
    It has not used index
    Execution Plan
    Plan hash value: 2265626682
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
    |* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
    /* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
    SELECT *
    FROM FIRST
    WHERE object_name = 'emp';
    This has used the index
    Execution Plan
    Plan hash value: 1184810458
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
    | 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
    |* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
    From this we can come to the conclusion that, whether to use one index or not by oracle
    would also depend on the data which is present in the table. This has to be this way as
    we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
    scan, it would be a performance hit when it searches for the second query ie where object_name
    ='emp';
    2.
    If we have a query like below.
    select * from emp
    where upper(ename) = upper(:p_ename);
    Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
    Create index idx_ename on emp(upper(ename));
    Regards,
    Cool

  • How can I determine which codec to use?

    I'm using PE7 on a PC. I have HD video shot with a Canon. Each video - there are six of them - is less than five minutes. After I finished editing, I uploaded them to youtube and emailed a link to my client, but my client complained that they were out of focus. I explained that it was the compression that youtube uses, and that I'd render them to disk for him to look at.
    Trouble is, I can't figure out which codec to use. All I know is that I want clear, sharp video, suitable for posting on the net. These are scientific videos, showing some chemical processes involving gasoline with ethanol and water.
    Can someone point me in the right direction?
    TIA

    I guess I need to explain better. The HD videos I'm editing will not end up on youtube, but will be posted on a government agency's website. I originally posted them on youtube just so the client could take a look without me having to attempt to email large video files or burn to disk, since the client is in a different location from me.
    The area of video editing and production that I'm the least knowledgeable - and therefore the most insecure - is when I attempt to render and save a video. Every video project I go through the same frustration of having a project that I'm happy with, but having a final product that either 1) does not look at all sharp or 2) results in a file size which is too large. In this case, since the final video files will be posted online, they need to be small enough for viewing over the net while maintaining enough sharpeness and quality that the video does not look out of focus.
    If you take a look at this video, for example: http://www.youtube.com/watch?v=t_X0IKPJrng you can see why my client thought it was out of focus. However, I know that the original footage is very sharp.This link is only temporary, as I've already been told that the agency I work for will not allow them to be posted on youtube.
    So, my question is, when I'm rendering and saving a video project from PE7, how do I know what settings to use for the highest quality, yet smallest file size? The manual does not go into much detail about the pros and cons of various codecs, nor does it say much about what settings do what. It's like Adobe expects me to already know this information.
    Is the problem with the video above simply that youtube compresses the videos I upload? Is Vimeo a better site to upload videos and maintain sharpness? In PE7, is there a way to set it up to upload to Vimeo, or should I render and save as an MP2 or MP4 file and then manually upload?
    Surely there's a site which goes into much greater details about the various settings I can use in PE, and how those settings affect the final viewing product.
    Thanks a lot for your help. I realize my questions show an extreme lack of experience, but that's why I'm here, right?

  • How can we know which index is triggered

    hi all ,
    how can we know which index is triggered in perticular select statement ? is that just based on the fields which used in the select statement or can we know from ST05 ?
    thanks,
    ram

    Hi Ram,
    You can go to transaction ST04(if you are authorised)...
    Now select 'Detail analysis menu' button.
    Now select SQL Request button under 'Resource consumption by' section.
    Now in the ' SQL statement pattern by ' field , give the part of the select statement you want to check.
    Now press execute.
    Now select the line item displayed and goto menu option <b>Goto->Explain SQL</b>.
    It will give you the execution plan for the particular SQL statement.
    From here you can get the index values from INDEX RANGE SCAN statement in this output.
    Hope this has been of some help to you...
    Regards,
    SP.

  • How can I know which has brought down the database SI or SA

    Hi to all,
    Hi
    Sorry about this simple question but i am little bit confused.
    Suppose if i used Shutdown immediate and i use Shutdown abort then how can i know which brought down my database Shutdown immediate(SI) or Shutdown abort(SA)
    Please help me !!!!!

    Hi,
    Ofcourse shutdown abort will execute...
    See the output from alert log
    Tue Jun 01 11:54:17 2010
    Shutting down instance (immediate)
    Stopping background process SMCO
    Tue Jun 01 11:54:35 2010
    Shutting down instance: further logons disabled
    Tue Jun 01 11:54:39 2010
    Shutting down instance (abort)
    License high water mark = 125
    USER (ospid: 5436): terminating the instance
    Instance terminated by USER, pid = 5436
    Tue Jun 01 11:54:42 2010
    Instance shutdown complete
    Thanks,
    Ajikumar G
    Expertise in Oracle Apps...

  • How can I know which clients are connected to my network through express and which are connected through extreme?

    I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
    Here you can see both routers:
    I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
    Below, one can see the summary of the config for both routers.
    Would somebody explain it?
    Thanks,
    Marcelo
    Message was edited by: Marcelão

    please disregard this answer.
    Message was edited by: Marcelão

  • How can i get a file header using this method cl_gui_frontend_services= gui

    Hi Experts,
    How can i get a file header using this method cl_gui_frontend_services=>gui_download
    Thanks
    Basu

    Hi,
    You can use the FM - GUI_DOWNLOAD to specify the headers. It can be done in the following manner -
    TYPES: BEGIN OF ty_head, "Structure for header
                 h(10) TYPE c,
                 END OF ty_head.
    DATA: it_head  TYPE TABLE OF ty_head WITH HEADER LINE.
    "Adding header details
    it_head-h = 'Field1'.
    APPEND it_head.
    it_head-h = 'Field2'.
    APPEND it_head.
    it_head-h = 'Field3'.
    APPEND it_head.
    it_head-h = 'Field4'.
    APPEND it_head.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                        = p_file
       filetype                        = 'ASC'
       write_field_separator           = 'X'
       header                          = '00'  "<= note this
      TABLES
        data_tab                        = it_tab
       fieldnames                      = it_head[] "<= Pass your header table here
    EXCEPTIONS
       OTHERS                          = 1.
    Hope this helps.
    Regards,
    Himanshu

  • How can i know which version of Smartview is installed on my system ?

    Hi All,
    How can i know which version of Smartview is installed on my system ?

    Do you know what version of Essbase you are running? that could help. You can find that in EAS. Right click on the server name and select edit ptoperties, then look on the environment tab. As a final measure, find the smartview.exe on yout machine right click and select properties. in one of the tabs there might be a version number

  • How can I know which screen-group is?

    Hi experts!!
    I don't know how can I know which screen-group is associaciate to the values...for example, how can I associate  this block to a screen-group for after do this?  IF SCREEN-GROUP1 EQ 'DAT'.
    SELECTION-SCREEN BEGIN OF BLOCK B9 WITH FRAME TITLE TEXT-017.
    SELECTION-SCREEN SKIP.
    SELECT-OPTIONS: FECHA FOR P0001-BEGDA MODIF ID DAT.
    SELECTION-SCREEN END OF BLOCK B9.
    Thanks and regards,
    Rebeca

    Hi,
    Check out this code.
    REPORT  Z94406_TEST_123                         .
    TABLES: pa0001,t549a.
    DATA: n(6) TYPE c.
    SELECTION-SCREEN BEGIN OF BLOCK za2 WITH FRAME.
    PARAMETERS:p1  RADIOBUTTON GROUP grp1 user-command a DEFAULT 'X'.
    SELECT-OPTIONS: s_prd1 FOR n NO-EXTENSION modif id G1.
    PARAMETERS:p2  RADIOBUTTON GROUP grp1.
    SELECT-OPTIONS: s_period FOR pa0001-begda NO-EXTENSION modif id G2.
    SELECTION-SCREEN END OF BLOCK za2.
    AT SELECTION-SCREEN OUTPUT.
    if p1 = 'X'.
    LOOP AT SCREEN.
        IF screen-group1 = 'G2' or screen-group1 = 'G2'.
                screen-input = '0'.
          MODIFY SCREEN.
       ENDIF.
      ENDLOOP.
    ELSE.
      IF screen-group1 = 'G2' or screen-group1 = 'G2'.
          screen-input = '1'.
          MODIFY SCREEN.
       ENDIF.
      ENDLOOP.
       ENDIF.
    Regards,
    Syed

  • HT1338 I wanted to import files but the computer says that there is not enough free space. how can i see which files take up the space?

    I wanted to import files but the computer says that there is not enough free space. how can i see which files take up the space?

    Here's freeing up disk space.
    DALE

Maybe you are looking for