How can I launch Dreamweaver CS 3 with license expired message?

I have used Dreamweaver CS 3 to design a website. I used a navigation tool, that is no longer available in CS 5.5. I tried to launch Dreamweaver CS 3, but got the popup message, that it is no longer licensed. Is there any workaround for that?

Is there any workaround for that?
Not really.  You need a licensed copy of the software in order to run it. 
I used a navigation tool, that is no longer available in CS 5.5.
That's a shame.  Those early menus were horrible and they don't work well in modern browsers.  That's why Adobe scrapped them. 
Best to replace the menus you have now with something better.
Nancy O.

Similar Messages

  • EXS24 : how can I launch and stop sound with key (instead of holding key)

    Hi,
    I'm using EXS24 to launch sounds (like pads) : I've created a specific instrument with one sound on each note (with differents zones). I've checked the box "One-" to have the sound that continues without holding the key, but I would like to be able to stop the sound with the same (or an other) key.
    WIthout stopping the other sounds.
    How can I do this ??
    Thanks for your help !
    Etienne

    You can make groups, have your "sample off" key assigned to a short audio file of silence (or just turn the volume parameter of that sample to -96 in the zone editing area of the EXS.
    Make the polyphony of the groups to 1. So you hit your one shot and it is playing through, when you hit the 'blank' key it plays instead - which is playing nothing.
    Depending on what you need, you can copy the blank sound into different groups (hold option and drag) - but this would stop all groups with one key. So if you need independent control, you can copy the same blank sample to different keys, and then group those individually with the different sample triggers.

  • How can I find my iCloud folder with my deleted messages? in it

    Where is the archive folder with the deleted messages in it?

    As Winston says, only if you have made a backup to icloud.  You have to perform a restore to get them back.
    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your device.  Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
    This link gives another overview of backup and restore:
    http://support.apple.com/kb/HT4859?viewlocale=en_US&locale=en_US

  • TS3276 How can I escape a frame block with "Cannot send message using the server Gmail"?

    The Mail send window blocked with the additional message The server "smtp.gmail.com" did not recognise the following recipients:" and appears constantly. It does not prevent me using Mail but I want to get it off my desktop.
    Any ideas?

    Are there any unsent messages in the Outbox?

  • How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line ?

    How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line, on windows ?
    firefoxe... -option? <addon name>?....?

    Does opening this page help: <b>about:addons</b>
    *https://developer.mozilla.org/en/Command_Line_Options

  • How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    Phone A = phone with information you want duplicated
    Phone B = phone that you want to copy from A
    Backup Phone A.
    Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
    Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
    When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
    After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

  • How can I incorporate DreamWeaver to upload all my images onto the website template in filezilla and make changes to the website template?

    I have all my images and website template in filezilla under hostgator as the web server, and how can I incorporate DreamWeaver so I can make changes to the website?

    You dont have to put everything onto your webserver first. You can start with DW locally (with all files stored on your computer) before uploading a completed site to your server.
    You can follow these instructions to define/ setup your site locally in DW: Defining a site in Dreamweaver
    And check out this tutorial to create your website: Creating your first website – Part 1: Setting up your site and project files | Adobe Developer Connection
    Then follow this to sync your files to your webserver: Adobe Dreamweaver * Getting and putting files to and from your server
    Good luck.

  • How can I update Dreamweaver 8  to 8.0.2 if I don't have the  .MSI file?

    How can I update Dreamweaver 8  to 8.0.2 if I don't have the  .MSI file?  I have moved this old copy to newer computer/operating system and don't have all the original discs and things.

    Donny4646 wrote:
    And you can move an installed application if you move a few other files manually and without getting into the registry.
    I'm very skeptical about that as I have dozens of Registry entries associated with my older DW installation.
    Still trying to assist anyway. Check this thread for a reported successful resolution
    https://forums.adobe.com/message/4215502
    Also try this:
    Download the unwrapped 8.0.2 update from Adobe: http://kb2.adobe.com/support/dreamweaver/ts/documents/kb400150/DW802_unwrapped.zip
    Extract the files into a root directory. There should be only one MSI file.
    Open an administrator privilaged command prompt by typing in the Start menu "Command" and right clicking the "Command Prompt" option and selecting "Run as Administrator"
    Navigate to the directory you extracted the files to using the CD command
    Once in the directory with the MSI file run the following command: msiexec /update patchpackage.msp
    Step through the installer, and everything should be fine, open Dream Weaver and go to Help -> About to verify the patch installed.

  • How can I stop Dreamweaver spoiling my code layout?

    For example, if I have:
    <div class="Something">
    <some other stuff>
    </div>
    Then if I save the file and close and reopen it again, I
    sometimes find
    Dreamweaver has changed it to:
    <div class="Something">
    <some other stuff></div>
    Which IMO is far less readable.
    Also, if I paste the following nicely formatted code from one
    document to
    another:
    <p class="whatever">
    Some text
    </p>
    <p class="whatever">
    Some text
    </p>
    Then if I paste it into another document and save,
    Dreamweaver sometimes
    changes it to:
    <p class="whatever">Some text</p>
    <p class="whatever">Some text</p>
    Which again, if there's a lot of text, I find far less
    readable.
    How can I stop it from interfering with my code in this way?
    I looked under
    Preferences, but couldn't see any obvious setting.
    Dave

    That's very helpful, thanks - but what does it mean by
    "Formatted but not
    indented" and "Not Formatted"? They both look identical in
    the preview
    window.
    The other problem is that I don't use consistent rules - or
    rather, I do,
    but my rules are far more complicated and context sensitive
    than the
    Dreamweaver ones. For instance, in general, I have two line
    breaks after a
    </p> tag, but not always - and in any case,
    Dreamweaver's rules don't
    appear to allow for two line breaks before or after any tag.
    Dave
    "slinkmaster" <[email protected]> wrote in
    message
    news:g09o6t$kr9$[email protected]..
    | I've run into it a few times, never could figure out why it
    did it when I
    | saved. But to correct the formatting so that it is more
    readable for you.
    Go to
    | Edit -> Preferences -> Code Format. Click on the "Tag
    Libraries..."
    button.
    | Locate the tags in the list that you want to edit the
    formatting for and
    make
    | it look how you want.
    |

  • How can I launch a site that I designed for a client using their MobileMe account? Can they 'open' my iWeb files on their iWeb software?

    How can I launch a site that I designed for a client using their MobileMe account? Can they 'open' my iWeb files on their iWeb software?

    If you give them the Domain.sites2 file that iWeb used to create the site  they will be able to open it with iWeb application (it has to be the same version as you have) and make changes.  But if you're expected to also make changes you'll need a way to send that file back and forth between the two. 
    Also there's an online MacWorld article that describes a way that both of you could manage the site using Dropbox.  Look at Managing an iWeb site from multiple Macs.
    OT

  • How can I launch FCPX without validating AU plugins?

    I have many hundreds of audio plugins for use with Logic Pro X, the primary app used on my system.  When I launch FCPX, it crashes during AU (plugin) validation.  How can I launch FCPX without validating AU plugins?  Is there an FCPX-specific AU manager?  I do not wish to move AU components around as my primary function is as an audio designer (so I do not wish to disrupt Logic Pro X functionality, even temporarily).
    Thank you for any help that you can provide.

    Thank you for your reply, David.  This is more of an FCPX question rather than a LPX question.  AU plugin validation works fine in LPX.  AU plugin validation crashes FCPX.  So, I am looking for a way to disable AU validation in FCPX (because I don't need the AU plugins in FCPX) ... or ... a way to selectively disable problematic AU plugins from within the FCPX app.  The latter is because I do not believe there is a system-wide way to do this without physically moving AU plugin components so FCPX does not "see" them.  At least one 3rd party tool does this, but I am not interested in affecting my LPX experience in any way.  Sorry if I was not clear in my original post.
    Thanks again for any insight or help that people can provide.  And, Happy Holidays to everyone in the community!

  • How can I do an startup disk with DiskWarriori included?

    How can I do an startup disk with DiskWarrior included?
    I want to do it with System 9.2.2. for those days that apperas an ? in the disk... buf!
    I did one but the Mac didn't recognize it...
    Thanks

    xjulia...
    Remember what I said earlier? ""The tricky parts... Then install your wanted version of Mac OS 9""...
    Install is a key word here.
    Launch your latest Mac OS 9 CD and run the Installer targeting the mounted image. I prefer to do a minimum universal install from within the installer. Uncheck items of no use. If your CD is an older version of Mac OS 9, run the following version of an updater. Same can be done to update your utilities so long as there is a updater available for the utility.
    <hr width="300">
    Copying an already installed System Folder, is a bit to be desired, as you have tons of manual trashing (fixing, weeding, etc.) to do.
    <--OR-->
    Bootable CDs normally contain a copy protected System Folder that is equivalent to fooling around with mother nature. It unfortunately leaves you with many CD cake boxes of coasters in the process.
    <hr width="300">
    By the way— A mounted image gets refreshed in a funny way. Drag the mounted image to the trash and "chug-chug". Click on the [your named].img file and a fresh image gets mounted. Just keep an eye on both as you get the feel.
    ...Ron

  • Can't launch Dreamweaver CS6 Cloud

    I can't launch Dreamweaver CS6 downloaded from the cloud on my sign-on with a Macbook Pro using Lion. I've talked to Adobe support twice -- first time had me set up a new admin user, which opened the program but hasn't got any of my files, next time had me uninstall, fix permissions and reinstall. Nothing has worked. Other cloud programs are working well. Any ideas?

    I believe there is a specific issues with DW's networking stuff used for Business Cartalyst and the Site Panel on some Mac installs. Perhaps you should search and ask in the DW forum...
    Mylenium

  • HT204053 When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

    When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

    1. Launch the App Store
    2. Select Store->Sign Out
    3. Select Store->Sign In and replace the Apple ID with the one you want to use

  • How can I recover my old account with a new one?

    Hi, my hotmail account it was hacked, I can't have acces to my adobe account anymore.
    How can I get acces to my old account with a new Adobe ID?
    I'm already subscribed to creative cloud and I can't have acces to my account and upgrade my products.
    what can I do?
    Thanks

    Thanks Romshina
    I read the link you send me and thanks, but the thing is that I still can't get into my Adobe Id, because when I try they ask me to reset my password in an email they will send me to my old account and there is the problem, because I don't have acces to that old acount, [email protected]
    now this is my new email, because the las one it was hacked and I just can't get back to it.
    So I would like to have access to my account and update this new email account, to have acces to my CC account.
    Thanks
    Date: Fri, 27 Dec 2013 06:51:15 -0800
    From: [email protected]
    To: <Removed by Moderator>
    Subject: Re: How can I recover my old account with a new one? How can I recover my old account with a new one?
        Re: How can I recover my old account with a new one?
        created by Romsinha in Adobe Creative Cloud - View the full discussion
    Hi Guillermo Castellanos,
    Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sig n-faq.html.
    Regards,
    Romit Sinha
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5959347#5959347
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: How can I recover my old account with a new one?
    To unsubscribe from this thread, please visit the message page at Re: How can I recover my old account with a new one?. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe Creative Cloud at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for