How can I lengthen a line in a presentation with an action?

all in the subject

Thanks—it does the trick. It actually is better than using animation, because I eventually transfer the file to my iPad, and Keynote on the iPad doesn't support animation, but does support builds!

Similar Messages

  • How can I use more lines to show a field of a row in a report?

    How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
    Thanks for any help.

    I was wondering if an answer was found for this one.
    I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
    So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

  • How can i remove a line from an ordinary text file?

    It is easy to remove a line from a file by rewriting the file. how can i remove a line without rewriting ? Also, do not use whitespaces to overwrite the line. I expect a perfect line deletion code .....

    gimbal2 wrote:
    hsc71 wrote:
    It's the way you communicate. Try to be carefull with the words you use in your post. It's easy to insult people just by choosing the wrong words. Bold text and capitals is equal to shouting.
    shock. You said "wrong words". I am seriously offended by that!
    Seriously, would you care that I am offended? I really hope not... Say what you want, people will find reasons to take offense one way or the other.Hehe, maybe you're right, but the OP still has no answer.............and in the end that's what he/she is looking for.

  • How can I make a line at 40 degree angle in Keynote 6

    How can you make a line of 40 degrees (or anywhere between 40 to 45) angle in the new Keynote 6.2.2. It seems they took away that nice feature from the previous version. When I move one end of a line, it locks onto 45 when I get near that angle, and jumps off directly to 34 when I try to move away. Previously you could click on a line to transform the ends into red spots, and move them independently to any angle or length. Now it locks onto 45, or 135 or 90 etc. I don't have any of the guides on or any other feature. This is supposed to happen only when holding shift key (which is also a great feature). If it locks onto the magic angles without holding shift, then there is no sense if having that feature at all.

    Press the command key when dragging, this switches off snapping and allows continuous placement.
    If you like numerical control:     Inspector > Format > Arrange > Rotate

  • How can you change your line access selection?  I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

    How can you change your line access selection?  I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

        DIVAB71,
    Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • How can I add a line item to delivery?

    Hi all,
    How can I add a line item in a delivery without using BDC?
    Regards!
    Curtis

    Hi,
    I have tried
    BAPI_OUTB_DELIVERY_CHANGE
    and this only allows you to change existing lines not add lines.
    Since its outboud delivery that I'm interested in I will not look at the inbound that you suggested.
    Any other suggestions would be appreciated.
    Regards!
    Curtis

  • How can hide the command line of a t.code in the portal

    Dear Experts.
    I have the following doubt:
    How can hide the Command Line of a Report that is called with a T.Code in the portal?
    Attach Image:
    [Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
    When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line  using
    ~webgui_simple_toolbar
    ~singletransaction
    ~NOHEADEROKCODE
    With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
    But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
    The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
    In this moment I have used the two options:
    1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
    RESULT:
    SAP Web Application Server
             500 Connection timed out
            Error: -5
           Version: 7000
           Component: ICM
           Date/Time: Sat Jun 12 20:26:39 2010 
           Module: icxxthr_mt.c
           Line: 2698
           Server: xyxab...
    Error Tag: {-}
    Detail: Connection to partner timed out after 60s
    2)  created an Iview Transaction  in the portal and  call my transaction.
    RESULT.
    [Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
    But not can hide the field Command Line and other buttons.
    I think that the command :
    ~webgui_simple_toolbar
    ~singletransaction
    ~NOHEADEROKCODE
    Only can be used if I create a service using the T.Code SICF .
    Best Regards
    Carmen.

    Hi Carmen,
    The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
    You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
    ~okcode=/nSU01
    And you can pass parameters in the same way:
    ~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
    By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
    Regards, Rory

  • How can i connect phone line to capsule

    how can i connect phone line to capsule?

    The phone line must connect to a modem, then the modem connects to the Time Capsule.

  • How can i find start line of any functions or procedures stored in package body?

    hi
    how can i find start line of any functions or procedures stored in package body?
    is there any way to write a query from for example user_source?
    thanks

    how can i find start line of any functions or procedures stored in package body?
    Why? What will you do differently if a procedure starts on line 173 instead of line 254?
    Tell us what PROBLEM you are trying to solve so we can help you find the best way to solve it.
    If you use PL_SCOPE that info is available in the *_IDENTIFIERS views. See 'Using PL/Scope in the Advanced Dev Doc
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28424/adfns_plscope.htm
    Try this simple sample code. The query is modified from that doc sample:
    -- tell the compiler to collect the info
    ALTER SESSION SET PLSCOPE_SETTINGS='IDENTIFIERS:ALL';
    -- recompile the package
    CREATE OR REPLACE package SCOTT.pack1 as
    PROCEDURE proc1;
    PROCEDURE proc2;
    END;
    CREATE OR REPLACE package BODY SCOTT.pack1 as
    PROCEDURE proc1 IS
    BEGIN
      NULL;
    END;
    PROCEDURE proc2 IS
    BEGIN
      proc1;
    END;
    PROCEDURE proc3 IS
    BEGIN
      proc1;
      proc2;
    END;
    END;
    -- query the info for the package spec
    WITH v AS (
      SELECT    Line,
                Col,
                INITCAP(NAME) Name,
                LOWER(TYPE)   Type,
                LOWER(USAGE)  Usage,
                USAGE_ID,
                USAGE_CONTEXT_ID
        FROM USER_IDENTIFIERS
          WHERE Object_Name = 'PACK1'
            AND Object_Type = 'PACKAGE'
    SELECT LINE, RPAD(LPAD(' ', 2*(Level-1)) ||
                     Name, 20, '.')||' '||
                     RPAD(Type, 20)||
                     RPAD(Usage, 20)
                     IDENTIFIER_USAGE_CONTEXTS
      FROM v
      START WITH USAGE_CONTEXT_ID = 0
      CONNECT BY PRIOR USAGE_ID = USAGE_CONTEXT_ID
      ORDER SIBLINGS BY Line, Col
    LINE,IDENTIFIER_USAGE_CONTEXTS
    1,Pack1............... package             declaration        
    2,  Proc1............. procedure           declaration        
    3,  Proc2............. procedure           declaration        
    -- query the info for the package body - change 'PACKAGE' to 'PACKAGE BODY' in the query above
    LINE,IDENTIFIER_USAGE_CONTEXTS
    1,Pack1............... package             definition         
    2,  Proc1............. procedure           definition         
    6,  Proc2............. procedure           definition         
    8,    Proc1........... procedure           call               
    10,  Proc3............. procedure           declaration        
    10,    Proc3........... procedure           definition         
    12,      Proc1......... procedure           call               
    13,      Proc2......... procedure           call               

  • How can I disappear the lines of the grid from the picture?

    Please help!
    This photo was made through a grid.
    http://www.flickr.com/photos/apexivision/4468964280/sizes/o/in/photostream/
    My question is: how can I disappear the lines of the grid from the picture with Photoshop CS2?  Thanks!!!

    Select the offending parts with a fuzzy-edged selection and adjust the curves to get some relief.
    Then Burn and Dodge can be your friends as well.
    Some things that can help:  Make a duplicate layer so you have the original to compare against (and to go back to as needed.  Work in 16 bits / channel and (ideally) at an upsampled resolution.  Add a Curves adjustment layer above with the curves pulled up so you can lighten up the shadows as needed and see that you're getting things right even in the dark shadows.
    You may need to do some selective noise reduction in the places you've enhanced, as the lightening and darkening will bring up the noise.
    -Noel

  • How can i add a line separator on Dreamweaver?

    Hi
    How can i add a line separator on Dreamweaver?
    Thanks

    Do you mean a Horizontal Rule (the <hr/> tag)?
    Click where you want it to appear and go to Insert > Horizontal Rule, or drag and drop from the Common heading of the Insert window.
    If that's not what you're talking about, could you be a bit more descriptive as to what you are trying to accomplish?

  • How can I add a line but keep the number I have from tmobile

    How can I add a line but keep the number I have from Tmobile

    Hi, Janice!
    I'm just guessing, but I imagine you'd get your question answered faster in the AE forum.

  • When using large text my lines overpal, how can I increase the line spacing?

    When using large text my lines overpal, how can I increase the line spacing?

    Press 'Ctrl + Enter' after the numbered item to insert blank space below it. If you press 'Enter', the next line will start with the next number. As long as you want to type lines without a numbering, press 'Ctrl + Enter' and type the line.

  • How can I make the line segment tool repeat several times?

    How can I make the line segment tool repeat several times?

    If this is what you want, hold the ~ key on your keyboard while dragging with the tool.
    If you want spaced copies of the completed line, use the Transform Effects from the Effects menu.

  • How can we delete a line from the table control .

    hi all
    how can we delete a line from the table control .
    situation is.
    created table control in se51 which will display the data of a table.
    how could i select a line from the table control ?
    how could i delete the selected lines form the table.
    thanks in advance

    Change the Table Control attributes such that user can only select a single record(row).
    <u>Tip to delete a selected record</u>
    1) write a module 'Mark' in the PAI as below
    PROCESS AFTER INPUT.
    MODULE cancel AT EXIT-COMMAND.
    LOOP WITH CONTROL table_view.
    MODULE read_table_control.
    FIELD flag MODULE mark ON INPUT.
    ENDLOOP.
    MODULE user_command_0100.
    2) Module Mark is below.
    MODULE mark INPUT.
    CHECK flag = 'X'.
    x = table_view-top_line + sy-stepl - 1.
    Delete itab INDEX x.
    ENDMODULE. " mark INPUT
    Table_view is the TableControl Name.
    'flag' is of type char(1) available in the Internal table which was assigned to the select option in the table control.
    <u>award if uesful</u>
    Regards,
    Sudheer

Maybe you are looking for