How can I listen to a sound file on Internet?

How can I listen to a sound file? On Internet

You need to download other browsers from the App Store. Use the App Store app And search for browsers you'll find a bunch of them. Download one that will do what you want. Once it's downloaded tap on the app icon to start the app.

Similar Messages

How can I merge many short sound files into 1 file?

Hello I have a bunch of 1 or 2 second long mp3 files that I'd like to merge together to make just 1 file.
Is there a way to do it in iTunes? I know you can merge tracks when importing Audio CDs but I'm not sure how to do it with files already on the computer.
Any suggestions?
Thanks!

Thanks Chris I'll check it out. Meantime I found Audio Hijack and that worked fine for capturing the system audio as the mp3's played in iTunes.
The trial version adds noise after you've been recording for 10 minutes but that's no prob. 'cuz I only needed it for about 5 minutes at a time.

How Can I listen to the line-in on my T400?

When I am at my desk, I've always had my satellite radio plugged into the line-in on my computer so that I can listen to it through the same speakers. With my new T400, I have the radio's output plugged into the line-in on the Advanced Dock. I know that it's getting a signal because if I record with Microsoft Sound Recorder, it records the radio.
How can I listen live to the signal coming into the line-in?

You can thank Microsoft for this one. They disabled the pass-through ability in Vista. Apparently too many people complained about feedback issues when trying to use webcams or VOIP programs and didn't know to mute the Line-In on the mixer. It took me forever to find how to correct it.
The following will enable the input sliders in your playback devices so audio pass through works without having to run through an application like it worked in XP. Remember, always backup your Registry just in case. I had to create new Keys for filter and SpeakerHp but yours may already be there
1) Open regedit (Start->Run, type regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE1031*8}\0000\Settings\filter\SpeakerHp\
3) Create a new Binary Value
4) Give it the name EnableInputMonitor
5) Set it's value to 01
6) Restart your machine
7) Open your Playback Devices (right click on volume control icon in system tray, select Playback Devices)
8) Open the Speakers/Headphones
9) Go to the levels tab
10) Unmute the input monitor
T500 - P8600 2.4Ghz Core 2 Duo, Modded - 4GB Patriot DDR3 and 320GB Caviar Black 7200rpm drive with Ati HD3650 and Catalyst 9.6 modded drivers - Vista Business 32bit stripped down to bare bones with VM's from Ubuntu to Win7RC1 64-bit.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

How can I listen to itunes and play a game at the same time on my ipad 4?

How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game. The game has its own sound control so I can turn off its sound while i listen to itunes tracks. But I don't know how to set it up so the ipad does both.

Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

How can I tell if someone copied files off of my G4?

I left my G4 unlocked because itunes was running for the stereo, I walked in to my office on someone acting funny. How can I determine if he copied files off of my Dual G4 onto a usb thumb drive, CD or DVD... Can I simply check an activity log, console or terminal?? All I need to know is if someone did anything which my system other then listen to itunes during a three hour window. Thanks in advance

You need to look at your system log in Console utility. Open Console in the /Applications/Utilities folder (cmd-shift-U will get you there right away), which will open with the console.log file. Click the Logs icon to reveal the other log files available, and you should find system.log right under console.log. Click system.log.
Now, in the filter window in the upper right corner of the window, type diskarbitration to filter. That will tell you if any thumb drive was connected, at least. This is the kind of thing you should find, maybe. The time stamp is important.
You may need to go back several swapped system.log versions, to be sure, so you need to then reveal the log files and folders under /var/log by clicking the triangle, then go down that list until you see eight files named system.log.0.gz through system.log.7.gz. Click each in turn and if they are not very short, filter again on diskarbitration.
Now, if you find something suspicious, you need to preserve the specific log file, as it will be rotated out by the daily maintenance. Bring up the Go to Folder dialog from Finder by the keyboard shortcut of cmd-shift-G, and type in /var/log as the name of the folder. This will bring up a folder with the log files of interest, which is normally an invisible folder. Select the log file you want to protect and duplicate it using cmd-D. Then move that duplicate to someplace safe.
You may also find CD burn information in the diskrecording.log file as well.
Message was edited by: old comm guy to add the last log file to look for.

How can we give the Data Format (File Type ) in Runtime

Hi all,
How can we give the Data Format (File Type ) in Runtime for the following method,
cl_gui_frontend_services=>gui_download.
Thanks in advance
Sri

There is a filetype parameter which you can set
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
*    BIN_FILESIZE              =
    filename                  =
*    FILETYPE                  = 'ASC'
*    APPEND                    = SPACE
*    WRITE_FIELD_SEPARATOR     = SPACE
*    HEADER                    = '00'
*    TRUNC_TRAILING_BLANKS     = SPACE
*    WRITE_LF                  = 'X'
*    COL_SELECT                = SPACE
*    COL_SELECT_MASK           = SPACE
*    DAT_MODE                  = SPACE
*    CONFIRM_OVERWRITE         = SPACE
*    NO_AUTH_CHECK             = SPACE
*    CODEPAGE                  = SPACE
*    IGNORE_CERR               = ABAP_TRUE
*    REPLACEMENT               = '#'
*    WRITE_BOM                 = SPACE
*    TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
*    FILELENGTH                =
changing
    data_tab                  =
* EXCEPTIONS
*    FILE_WRITE_ERROR          = 1
*    NO_BATCH                  = 2
*    GUI_REFUSE_FILETRANSFER   = 3
*    INVALID_TYPE              = 4
*    NO_AUTHORITY              = 5
*    UNKNOWN_ERROR             = 6
*    HEADER_NOT_ALLOWED        = 7
*    SEPARATOR_NOT_ALLOWED     = 8
*    FILESIZE_NOT_ALLOWED      = 9
*    HEADER_TOO_LONG           = 10
*    DP_ERROR_CREATE           = 11
*    DP_ERROR_SEND             = 12
*    DP_ERROR_WRITE            = 13
*    UNKNOWN_DP_ERROR          = 14
*    ACCESS_DENIED             = 15
*    DP_OUT_OF_MEMORY          = 16
*    DISK_FULL                 = 17
*    DP_TIMEOUT                = 18
*    FILE_NOT_FOUND            = 19
*    DATAPROVIDER_EXCEPTION    = 20
*    CONTROL_FLUSH_ERROR       = 21
*    NOT_SUPPORTED_BY_GUI      = 22
*    ERROR_NO_GUI              = 23
*    others                    = 24

How can I create an csv/excel file using pl/sql and then sending that file

How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244}

HT1848 when i purchase ringtones and they download directly to the music app on iphone, how can I move them to SOUNDS in SETTINGS so I can assign to various functions please?

when i purchase ringtones and they download directly to the music app on iphone, how can I move them to SOUNDS in SETTINGS so I can assign to various functions please?

You would have to create the ringtones.
Google will find several way to do this.
You cannot buy ready made ringtones from your computer.

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

My computer crashed necessitating re-install of op sys and all programs including iTunes. At the iTunes store when I click a song in my library get error message "can't find, do you want to search?" What's happening? How can I listen to my library on this

My computer crashed necessitating re-install of operating sys and all programs including iTunes. When I click on a song in my library I get an error message "can't find this song, want to search?" What gives? How can I listen to songs in my library on this computer now?

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

How can I print mulitple different .ai files onto one page in Illustrator CS6?

How can I print mulitple different .ai files onto one page in Illustrator CS6? I have all of the files organized by Arrange Documents>Tile All in Grid and I would like to print the files in this format so that they can all be seen at once when printed out onto one page.
Some background is that I have 16 different cad drawings that I have converted and edited in illustrator. I'd like to basically make a contact sheet with all 16 drawings so that they can be reviewed on one sheet of paper after printing. But each drawing is in it's own unique file, and I have not figured out how to put them all onto one page for printing.

You can place them (linked) into a new Illustrator file and print from there.
The original files will need pdf compatability.

If I imported a CD into my iTunes library from one computer how can I listen to it from another computer?

If I imported a CD into my iTunes library from one computer how can I listen to it from another computer? I imported music from a CD into my compter at work and when I got home and went to my iTunes account none of the songs were in my library. I also noticed that on my Work computer there were a couple songs that I had to click on the little 'cloud' icon before I could listen to them (these were not songs I imported they were songs that were already in my library). Not sure if this makes semse...help.

jamie171 wrote:
My question is since I have imported them into my iTunes library from one computer why can't I access them from my iTunes library from another computer that I have authorized to access whats in my library? Is there no way to import songs only once into the library and then access them from all my authorized computers?
Only if you have iTunes Match or of the computers are on the same local network.

How can I locate my iTunes library files. When I click on my itunes icon the message appears, "The file iTunes Library.itl." cannot be found because it was created by a newer version of iTunes."

How can I locate my iTunes library files? When I click on my iTunes icon rather than my iTunes files I receive, " The file iTunes Library.itl." cannot be read because it was created by a newer version of iTunes." I have already tried to update my iTunes program.

Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file.

How can I share a *.java source file across multiple projects in NetBeans?

I'm sure this simple and a pretty common operation but how can I share a *.java source file across multiple projects in NetBeans? Right now I keep cut, coping and pasting the same source file between multiple projects to re-use the same code. But I could I make this source file a library file or something like that so that I could access it from any project. I assume this would be a generic operation but I mentioned NetBeans for clarity. Thanks.

fiebigc wrote:
I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
>I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
Create a class library.
Write your code, compile it to .class files, put those class files in a .jar file and include the jar file in the classpath whenever you want to compile a project against it.

How can I listen to a sound file on Internet?

Similar Messages

Maybe you are looking for