How can I load bitmaps/vector graphics in my application using only actionscript 3.0?
I want to have DisplayObject that will randomly contain bitmaps/vectors from some database. I want to implement this using only code. How?
use the loader class:
var loader:Loader=new Loader();
loader.load(new URLRequest("image1.jpg"));
addChild(loader); // or, yourdisplayobject.addChild(loader)
Similar Messages
-
How can i order more copies of a iPhoto book using only the order number
how can i order more copies of an iPhoto book I made
by using only the order number
as I deleted by mistake a copy of it on my iphotoI know the horse is out of the barn but this tutorial might be of help for future books: iP12 - Archiving an iPhoto 9 (11) Book for Editing and/or Ordering at a Later Date.
If you're starting over from scratch with a book I suggest you create a new library just for that book. Put the photos you want in the book in an album in your current library and use the paid version of iPhoto Library Manager to copy that album into the book library.
This will keep the book library small for easy saving to CD or DVD or to an EHD. If you delete photos from your full library it won't affect the book library.
Happy Holidays -
How do I know/how can I control which video card a particular application uses?
Hey there--
Simple question: I have the ATI Radeon HD 2600 256 MB and the NVIDIA Quadro FX 5600 1536 MB installed via PCIe ports on an early 2008 Mac Pro. I've decided for a multitude of reasons that I'd like my displays to be plugged into the HD 2600, but I want certain applications-- Final Cut, games, etc-- to use the FX 5600. How can I be sure that this is happening? Is it possible? Will more intensive applications automatically utilize the proper card?
Thanks much.Yes, it means the 7970 requires 1 x 6 pin and 1 x 8 pin. The Mac Pro supplies 2 x 6 pin, which is 75 Watts each.
So Mac Pro can supply 75 Watts from PCIe slot and 2 x 75 Watts from 2 x 6 pin for the total of 225 Watts.
The 7970 requires more than 225 Watts. There are people that run these cards from internal power and say the additional power pulled over the traces on the Mainboard won't damage the board, but I've seen several reports of burned out Mainboards and more commonly the PSU just shuts the Mac Pro down hard for safety reasons. Remember: the 2 x 6 pin ports power runs over traces(!) on the board, not over cables. If you over tax them this is a lot more dangerous as with cables.
It's up to everyone to decide for themself if they want to risk running cards above the power provided by the Mac Pro.
The safe way is always to go for 2 x SATA to 1 x 6 pin adapter and 2 x 6 pin to 1 x 8 pin adapters and provide the power for 7970 / R9 280x or GTX 780 in the Mac Pro like that. Or get an external / additional PSU for power hungry GPUs. That works, too.
But you will obviously lose 2 x SATA ports. I run eSATA with RAID5 anyway, since RAID5 in the Mac Pro is too much of a hassle.
Of course all that matters if it works in the end. But official power specifications are a matter you shouldn't take too lightly. -
How can i input Arabic text in my web application using unicode
hello
i am working on struts project i m working on internationalization api now as far as label and messages are concern are properly displayed through resource file s but i want to input the text throught text field in Arabic also now can any one telll me how can i achieve this i will be thankful if some one helps me .
thanks
Farrukhgimbal2 wrote:
sabre150 wrote:
AccadSoft wrote:
please guys I need an answer.To get answers about using iText I use "iText In Action, 2nd edition" by the prime author of iText - Bruno Lowagie.Classic way to make money - make the API free and sell the documentation. Also an honorable way to make money IMO.I was using iText before 2004 when the first edition of the book came out ( 4 years or so after the library was first introduced) and it was hard work. PDF is a very complex document format and just using the Javadoc does not really get you anywhere. There are many 'gotchas' in iText and most of the iText tutorials cover only the very basics and pretty much none of the 'gochas'. The book starts off with very simple examples that could be constructed from the Javadoc but then it does move on to the more complex issues. Worth every penny. -
How can I make ANY vector graphics with graphics2D and save on clipboard?
I am at my wits end here, and need some help. Simply put, I have a program that creates a basic x-y graph, drawn in a jpanel. I want to create the graph as a vector (emf, eps, svg, I don't care anymore, any of them would be good). But, all I get is a jpg or bitmap.
I tried using the infamous FreeHEP programs, but it won't recognize the output as anything but "image" which means bitmap/jpg.
The user enters x/y data, clicks a button, which crreates a jpanel thusly:
public class GraphMaker extends JPanel {
static BufferedImage image = new BufferedImage(600, 500, BufferedImage.TYPE_INT_ARGB);
GraphMaker(double[] xVals, double[] yVals, double[] sems){
setPreferredSize(new Dimension (600,500));
symSize = 10;
XminV = 0;
XmaxV = 0;
// code here just converts input x and y's to pixel coordinates, spacing of ticks, etc...
for (int i =0;i < ArLn; i++){
gX[i] = xO + (gX[i] * xRat);
gX[i] -= xStart;
gY[i] = gY[i] * yRat;
gY[i] = yEnd - gY;
semVal[i] = semVal[i]*yRat;
Ymin = yEnd - (Ymin*yRat);
Ymax = yEnd - (Ymax*yRat);
BufferedImage anImage = new BufferedImage(600, 500, BufferedImage.TYPE_INT_ARGB);
Graphics2D g2 = anImage.createGraphics();
g2.setBackground(white);
g2.setColor( Color.WHITE );
g2.fillRect(0,0,600,500);
g2.setStroke(stroke);
// here I use the values to draw lines and circles - nothing spectacular:
g2.setPaint(Color.blue);
int ii = 0;
for ( int j = 0; j < ArLn[ii]; j++ ) {
g2.fill(new Ellipse2D.Float(LgX[ii][j] - symOffst, gY[ii][j]-symOffst, symSize,symSize));
g2.draw(new Line2D.Float(LgX[ii][j],(gY[ii][j]-semVal[ii][j]),LgX[ii][j],(gY[ii][j]+semVal[ii][j])));
g2.draw(new Line2D.Float(LgX[ii][j]-2.0f,(gY[ii][j]-semVal[ii][j]),LgX[ii][j]+2.0f,(gY[ii][j]-semVal[ii][j])));
g2.draw(new Line2D.Float(LgX[ii][j]-2.0f,(gY[ii][j]+semVal[ii][j]),LgX[ii][j]+2.0f,(gY[ii][j]+semVal[ii][j])));
g2.draw(new Line2D.Float(xLoVal[ii],yLoVal[ii],xHiVal[ii],yHiVal[ii]));
image = anImage;
And, when the user clicks on the "copy" button, invokes this:
public class Freep implements Transferable, ClipboardOwner {
public static final DataFlavor POSTSCRIPT_FLAVOR = new DataFlavor("application/postscript", "Postscript");
private static DataFlavor[] supportedFlavors = {
DataFlavor.imageFlavor,
POSTSCRIPT_FLAVOR,
DataFlavor.stringFlavor
private static JPanel chart;
private int width;
private int height;
public Freep(JPanel theGraph, int width, int height) {
this.theGraph = Graphs;
this.width = width;
this.height = height;
//******This is the key method right here: It is ALWAYS imageFlavor, never anything else. How do I make this an EPS flavor?
public Object getTransferData(DataFlavor flavor) throws UnsupportedFlavorException, IOException {
if (flavor.equals(DataFlavor.imageFlavor)) {
return GraphMaker.image;
else if (flavor.equals(POSTSCRIPT_FLAVOR)) {
return new ByteArrayInputStream(epsOutputStream().toByteArray());
else if (flavor.equals(DataFlavor.stringFlavor)) {
return epsOutputStream().toString();
} else{
throw new UnsupportedFlavorException(flavor);
private ByteArrayOutputStream epsOutputStream() throws IOException {
EPSDocumentGraphics2D g2d = new EPSDocumentGraphics2D(false);
g2d.setGraphicContext(new org.apache.xmlgraphics.java2d.GraphicContext());
ByteArrayOutputStream out = new ByteArrayOutputStream();
public DataFlavor[] getTransferDataFlavors() {
return supportedFlavors;
public boolean isDataFlavorSupported(DataFlavor flavor) {
for(DataFlavor f : supportedFlavors) {
if (f.equals(flavor))
return true;
return false;
public void lostOwnership(Clipboard arg, Transferable arg1) {
The same happens with FreeHEP - I want the flavor to be EMF, but the program sees an image so it is always imageFlavor. I know I am missing something, but what, I don't know.
thanks for your help.I don't think there's a built-in solution. One workaround I've seen is to create a dummy graphics class that overrides the desired drawing functions. Instead of actually drawing pixels, the object writes postscript commands to a buffer. There also seems to be commercial code that does exactly this.
-
I have deleted the scroll bar twice in 4 years and I still don't know how to set it back. Please help.
hi Samberl
thanks a lot for the fast reply.
I was dragging folders from main folders on the laptop-desktop onto the external drive icon - to copy them across....
Your suggestion sounds very promising - I didn't know about 'cloning'.
Yes the idea is to backup the laptop - I thought I would just move it all now, new - and then keep saving/dragging physically across to the new drive myself each day or two...
Would this be the sizeof the internal hard drive = c.500 gb ? = under the HD icon on desktop is written :
" 499.76gb , 311.5 gb free "
I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
I have found CCC [carbon copy cloner] googling - looks good.
When CCC site says it backs up the hard drive - would this mean all my files [over 100 gb] that are mostly in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon, would all copy across successfully [wherever they are in the computer ] ?
thanks again, hope you can clarify these things and then I will go for it.
It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
Julie -
HT204365 How can I transfer several pdf files to another app using only the iPad?
I have several PDF files in iBooks.
I also use Notes Plus, which reads pdf files.
In any application (other than iBooks) that reads pdf files, the curved arrow asks me if I want to open the pdf in another program - e.g. Notes Plus
But iBooks' curved arrow only offers to email or print.
I believe Apple should update iBooks to allow pdf files to open in other applications.
Do you agree? Or is there some way - without emailing or internet connection, without computer syncing - only using the iPad alone - that I can transfer pdf files from iBooks to Notes Plus and other apps?Short of emailing it to yourself for which you do need an Internet connection, there is no way to open that PDF in another app. iBooks just does not allow for it.
If you want to see Apple add the capability to iBooks, let them know about it.
http://www.apple.com/feedback/ipad.html -
How can I load a graphic in SOFFCONT1 into an SAP picture control?
At my customer site, GOS attachments to PM notifications are stored in SOFFCONT1, so I can't use cl_bds_document_set to get a URL that I can pass to the load method of the SAP picture control.
How can I load the actual graphic in SOFFCONT1 into an SAP picture control?
Or do I have to configure IW22 so it stores in BDS content servers, not SOFFCONT1?
If this is the case, how do configure IW22 so GOS knows to store attachments as BDS documents rather than in SOFFCONT1 ???
Thanks
djhThis explains how to make sure your PC and bin documents are saved on your HTTP content server, instead of in the database:
http://help.sap.com/saphelp_nw04/helpdata/en/c0/1aca5823ee11d3a2db00a0c943858e/content.htm -
How can I load my data faster? Is there a SQL solution instead of PL/SQL?
11.2.0.2
Solaris 10 sparc
I need to backfill invoices from a customer. The raw data has 3.1 million records. I have used pl/sql to load these invoices into our system (dev), however, our issue is the amount of time it's taking to run the load - effectively running at approx 4 hours. (Raw data has been loaded into a staging table)
My research keeps coming back to one concept: sql is faster than pl/sql. Where I'm stuck is the need to programmatically load the data. The invoice table has a sequence on it (primary key = invoice_id)...the invoice_header and invoice_address tables use the invoice_id as a foreign key. So my script takes advantage of knowing the primary key and uses that on the subsequent inserts to the subordinate invoice_header and invoice_address tables, respectively.
My script is below. What I'm asking is if there are other ideas on the quickest way to load this data...what am I not considering? I have to load the data in dev, qa, then production so the sequences and such change between the environments. I've dummied down the code to protect the customer; syntax and correctness of the code posted here (on the forum) is moot...it's only posted to give the framework for what I currently have.
Any advice would be greatly appreciated; how can I load the data faster knowing that I need to know sequence values for inserts into other tables?
DECLARE
v_inv_id invoice.invoice_id%TYPE;
v_inv_addr_id invoice_address.invoice_address_id%TYPE;
errString invoice_errors.sqlerrmsg%TYPE;
v_guid VARCHAR2 (128);
v_str VARCHAR2 (256);
v_err_loc NUMBER;
v_count NUMBER := 0;
l_start_time NUMBER;
TYPE rec IS RECORD
BILLING_TYPE VARCHAR2 (256),
CURRENCY VARCHAR2 (256),
BILLING_DOCUMENT VARCHAR2 (256),
DROP_SHIP_IND VARCHAR2 (256),
TO_PO_NUMBER VARCHAR2 (256),
TO_PURCHASE_ORDER VARCHAR2 (256),
DUE_DATE DATE,
BILL_DATE DATE,
TAX_AMT VARCHAR2 (256),
PAYER_CUSTOMER VARCHAR2 (256),
TO_ACCT_NO VARCHAR2 (256),
BILL_TO_ACCT_NO VARCHAR2 (256),
NET_AMOUNT VARCHAR2 (256),
NET_AMOUNT_CURRENCY VARCHAR2 (256),
ORDER_DT DATE,
TO_CUSTOMER VARCHAR2 (256),
TO_NAME VARCHAR2 (256),
FRANCHISES VARCHAR2 (4000),
UPDT_DT DATE
TYPE tab IS TABLE OF rec
INDEX BY BINARY_INTEGER;
pltab tab;
CURSOR c
IS
SELECT billing_type,
currency,
billing_document,
drop_ship_ind,
to_po_number,
to_purchase_order,
due_date,
bill_date,
tax_amt,
payer_customer,
to_acct_no,
bill_to_acct_no,
net_amount,
net_amount_currency,
order_dt,
to_customer,
to_name,
franchises,
updt_dt
FROM BACKFILL_INVOICES;
BEGIN
l_start_time := DBMS_UTILITY.get_time;
OPEN c;
LOOP
FETCH c
BULK COLLECT INTO pltab
LIMIT 1000;
v_err_loc := 1;
FOR i IN 1 .. pltab.COUNT
LOOP
BEGIN
v_inv_id := SEQ_INVOICE_ID.NEXTVAL;
v_guid := 'import' || TO_CHAR (CURRENT_TIMESTAMP, 'hhmissff');
v_str := str_parser (pltab (i).FRANCHISES); --function to string parse - this could be done in advance, yes.
v_err_loc := 2;
v_count := v_count + 1;
INSERT INTO invoice nologging
VALUES (v_inv_id,
pltab (i).BILL_DATE,
v_guid,
'111111',
'NONE',
TO_TIMESTAMP (pltab (i).BILL_DATE),
TO_TIMESTAMP (pltab (i).UPDT_DT),
'READ',
'PAPER',
pltab (i).payer_customer,
v_str,
'111111');
v_err_loc := 3;
INSERT INTO invoice_header nologging
VALUES (v_inv_id,
TRIM (LEADING 0 FROM pltab (i).billing_document), --invoice_num
NULL,
pltab (i).BILL_DATE, --invoice_date
pltab (i).TO_PO_NUMBER,
NULL,
pltab (i).net_amount,
NULL,
pltab (i).tax_amt,
NULL,
NULL,
pltab (i).due_date,
NULL,
NULL,
NULL,
NULL,
NULL,
TO_TIMESTAMP (SYSDATE),
TO_TIMESTAMP (SYSDATE),
PLTAB (I).NET_AMOUNT_CURRENCY,
(SELECT i.bc_value
FROM invsvc_owner.billing_codes i
WHERE i.bc_name = PLTAB (I).BILLING_TYPE),
PLTAB (I).BILL_DATE);
v_err_loc := 4;
INSERT INTO invoice_address nologging
VALUES (invsvc_owner.SEQ_INVOICE_ADDRESS_ID.NEXTVAL,
v_inv_id,
'BLAH INITIAL',
pltab (i).BILL_DATE,
NULL,
pltab (i).to_acct_no,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
SYSTIMESTAMP,
NULL);
v_err_loc := 5;
INSERT INTO invoice_address nologging
VALUES ( SEQ_INVOICE_ADDRESS_ID.NEXTVAL,
v_inv_id,
'BLAH',
pltab (i).BILL_DATE,
NULL,
pltab (i).TO_ACCT_NO,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
SYSTIMESTAMP,
NULL);
v_err_loc := 6;
INSERT INTO invoice_address nologging
VALUES ( SEQ_INVOICE_ADDRESS_ID.NEXTVAL,
v_inv_id,
'BLAH2',
pltab (i).BILL_DATE,
NULL,
pltab (i).TO_CUSTOMER,
pltab (i).to_name,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
SYSTIMESTAMP,
NULL);
v_err_loc := 7;
INSERT INTO invoice_address nologging
VALUES ( SEQ_INVOICE_ADDRESS_ID.NEXTVAL,
v_inv_id,
'BLAH3',
pltab (i).BILL_DATE,
NULL,
'SOME PROPRIETARY DATA',
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
SYSTIMESTAMP,
NULL);
v_err_loc := 8;
INSERT
INTO invoice_event nologging (id,
eid,
root_eid,
invoice_number,
event_type,
event_email_address,
event_ts)
VALUES ( SEQ_INVOICE_EVENT_ID.NEXTVAL,
'111111',
'222222',
TRIM (LEADING 0 FROM pltab (i).billing_document),
'READ',
'some_user@some_company.com',
SYSTIMESTAMP);
v_err_loc := 9;
INSERT INTO backfill_invoice_mapping
VALUES (v_inv_id,
v_guid,
pltab (i).billing_document,
pltab (i).payer_customer,
pltab (i).net_amount);
IF v_count = 10000
THEN
COMMIT;
END IF;
EXCEPTION
WHEN OTHERS
THEN
errString := SQLERRM;
INSERT INTO backfill_invoice_errors
VALUES (
pltab (i).billing_document,
pltab (i).payer_customer,
errString || ' ' || v_err_loc
COMMIT;
END;
END LOOP;
v_err_loc := 10;
INSERT INTO backfill_invoice_timing
VALUES (
ROUND ( (DBMS_UTILITY.get_time - l_start_time) / 100,
2)
|| ' seconds.',
(SELECT COUNT (1)
FROM backfill_invoice_mapping),
(SELECT COUNT (1)
FROM backfill_invoice_errors),
SYSDATE
COMMIT;
EXIT WHEN c%NOTFOUND;
END LOOP;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
errString := SQLERRM;
INSERT INTO backfill_invoice_errors
VALUES (NULL, NULL, errString || ' ' || v_err_loc);
COMMIT;
END;Hello
You could use insert all in your case and make use of sequence.NEXTVAL and sequence.CURRVAL like so (excuse any typos - I can't test without table definitions). I've done the first 2 tables, so it's just a matter of adding the rest in...
INSERT ALL
INTO invoice nologging
VALUES ( SEQ_INVOICE_ID.NEXTVAL,
BILL_DATE,
my_guid,
'111111',
'NONE',
CAST(BILL_DATE AS TIMESTAMP),
CAST(UPDT_DT AS TIMESTAMP),
'READ',
'PAPER',
payer_customer,
parsed_francises,
'111111'
INTO invoice_header
VALUES ( SEQ_INVOICE_ID.CURRVAL,
TRIM (LEADING 0 FROM billing_document), --invoice_num
NULL,
BILL_DATE, --invoice_date
TO_PO_NUMBER,
NULL,
net_amount,
NULL,
tax_amt,
NULL,
NULL,
due_date,
NULL,
NULL,
NULL,
NULL,
NULL,
SYSTIMESTAMP,
SYSTIMESTAMP,
NET_AMOUNT_CURRENCY,
bc_value,
BILL_DATE)
SELECT
src.billing_type,
src.currency,
src.billing_document,
src.drop_ship_ind,
src.to_po_number,
src.to_purchase_order,
src.due_date,
src.bill_date,
src.tax_amt,
src.payer_customer,
src.to_acct_no,
src.bill_to_acct_no,
src.net_amount,
src.net_amount_currency,
src.order_dt,
src.to_customer,
src.to_name,
src.franchises,
src.updt_dt,
str_parser (src.FRANCHISES) parsed_franchises,
'import' || TO_CHAR (CURRENT_TIMESTAMP, 'hhmissff') my_guid,
i.bc_value
FROM BACKFILL_INVOICES src,
invsvc_owner.billing_codes i
WHERE i.bc_name = src.BILLING_TYPE;Some things to note
1. Don't commit in a loop - you only add to the run time and load on the box ultimately reducing scalability and removing transactional integrity. Commit once at the end of the job.
2. Make sure you specify the list of columns you are inserting into as well as the values or columns you are selecting. This is good practice as it protects your code from compilation issues in the event of new columns being added to tables. Also it makes it very clear what you are inserting where.
3. If you use WHEN OTHERS THEN... to log something, make sure you either rollback or raise the exception. What you have done in your code is say - I don't care what the problem is, just commit whatever has been done. This is not good practice.
HTH
David
Edited by: Bravid on Oct 13, 2011 4:35 PM -
How can I load an external SWF into a movie clip that's inside other movie clip?
Hi.
I creating my first flash (actionscript 3.0) website but I'm
stuck with a visual effect I want to create.
I have a window on my website called contentWindow. Every
time you click a button this window is supposed to leave the stage,
load the requested content and return to the stage.
The sliding window is a movie clip with 83 frames, 21 to
enter the stage, 21 to leave the stage again, 20 for nothing (its
just to simulate the loading time) and 21 to return to the stage.
Now my goal is, when the user clicks on a navigation button,
the window exits the stage, loads an external SWF with the content,
and then returns to the stage.
I've the "window" movie clip with an instance name of
"contentWindow". Inside there is another movie clip with an
instance name of "contentLoader". The content that the user
requested should appear inside the "contentLoader".
Now, when the contentWindow leaves the stage, I get this
error message:
quote:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at rwd_fla::MainTimeline/trigger()
If I switch
"contentWindow.contentLoader.addChild(navLoader);" for
"contentWindow.addChild(navLoader);" it works fine, but the
external SWF doesn't move with the window.
How can I load an external SWF into a movie clip that's
inside other movie clip?Hi,
Recently, I have been putting together a flash presentation.
And I am just wondering if the following might help you, in your
communication with the said swf file:
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
onComplete);
function onComplete(event:Event):void
event.target.content.thinggy_mc.y -= 100;
Not the best example, but this allows you to target a mc
within an external swf file. I think if you look up this code, you
will have an answer ;)
Kind Regards,
Boxing Boom -
How can I load a .pst file to an instrument in logic express 9?
I have some instruments plug-in settings from my old computer that I used with logic, and I want to load them into logic so I can use them on the computer I moved them to. On any instrument I try (ES1, ES2, EXS24 and the rest) it won't allow me to load the files (.pst files) and I know I should be able to. Am I just going about it wrong or using the wrong instrument? How can I load these files so that I can use the instruments again?
Pages is not in a format compatible for what you want to do.
After you save a a Pages document, go to File > Export > and choose either Word or Pdf format. You can also choose RTF or PlainText too. Then you can email to yourself or others.
Good Luck.
Adam -
How can I load data into table with SQL*LOADER
how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961 -
How can i load Client side XML file to Table
Hi,
How can i load the all the XML files (near 10,000 files) available in client machine to the XML table .
I did try with directrory list in the Webutility demo form, but when the number of file is near to 1,500 its giving error.
Please suggest the best method to implement my requirements.
1. XML fies are in a folder in end users machine(Windows OS)
2. I need to load all the XML files to table (Oracle Database is in Unix)
I am using forms 10g
Thanks in advance.
RizlyHi,
What is the error you are getting when you reach 1,500 records? Can you post it? You mentioned you are using the webutil to load them. How you are loading? From the client machine you are loading to the database directly? Can you post the code you are using for that?
-Arun -
How can i load a VI from LABVIEW ver 6.0.1b3 to LABVIEW ver 6.1
How can i load a VI from LABVIEW ver 6.0.1b3 to LABVIEW ver 6.1......I want to load a vi but i'm getting this error:
LabVIEW load error code 9:VI version (6.1) is newer than LabVIEW version (6.0.1b3)
My LabVIEW ver is 6.1
Please help ......it's important
ThanksI am having similar issues with a *.exe from LV6.1. I have the runtime engine for 6.1 and recently upgraded to 8.2 from 7.1. I've never had 6.1 on my machine. I am able to install this executible and runtime engine on a machine with 7.1 and can run the *.exe fine.
I get a load error and am not sure why. I have had similar issues with old VI's that I have written in 7.1 executing on this machine w/ 8.2
any suggestions.
Attachments:
error.zip 14 KB -
How can I load a CMYK jpeg image
How can I load a CMYK jpeg image (originally saved from Photoshop) and then
turn it into an rgb BufferedImage, in order to display it on screen in an
applet?
I first tried ImageIO.read(), but that does not work for cmyk jpegs. I then
looked into the com.sun.image.codec.jpeg package, and tried methods like
decodeAsBufferedImage() and decodeAsRaster().
The first one (decodeAsBufferedImage) returned an image, but it seems that
it was interpreted as an ARGB, and the colors were incorrect.
I then read the documentation which (amongst many other things) stated that
"If the user needs better control over conversion, the user must request the
data as a Raster and handle the conversion of the image data themselves."
This made sense, so I took to decodeAsRaster(), only to find that I could
not figure out how to carry out the desired conversion.
Of course, I have looked into the documentation for BufferedImage, Raster,
ColorModel, ColorSpace etc, but after a while I was lost. (Before I got lost
I read that you can convert images with the help of methods like toRGB,
toCIEXYZ.)
I have a feeling that this is probably pretty simple if you just know how to
do it, but I sure would need some directions here.
Any help would be appreciated. Thanks.You can either use the "Place" command from the main menu, under "File", or you can just open it, select the move tool "V", the click in the image and drag it to the other file's tab.
Maybe you are looking for
-
Hi everyone, I pre-ordered my iPhone 6 on (Sept 12th at 11:30PM) that is almost 24 hours after pre ordering opened up. During the checkout time, my estimated delivery was Oct 1 - Oct 6 and this is the same date shown on my order confirmatione email.
-
My itunes on windows 8 doesnt seem to recognise any of my apple devices(ipad, iphone 5).
My itunes on widows 8 doesnt recognise devices. I have reinstalled itunes and yet the same problem occurs. Please can you help!!
-
TS1468 Where is the compilation option in version 11?
I have a single album what was split into 5 sections because of variations on artist name. Past support articles suggested using the Compilation option when selecting the multiple split portions. Where is that option in version 11 of iTunes? I do no
-
Java.lang.IllegalArgumentException: org.apache.fop.svg.SVGElementMapping
Hi, I have an FOP application which presents the data retrieved from database in a PDF format. Now when Iam trying to deploy the FOP application to OC4J and I get the following error. java.lang.IllegalArgumentException: org.apache.fop.svg.SVGElementM
-
How do I export Full Quality from iMovie 11?
Basically, I want to export a version in as high a quality as possible for archive purposes. So if in the future, I need to convert to as-yet-undeveloped file types, I have as close to the (edited) source as possible. iMovieHD had a "Full Quality" se