How can I load mavericks on a new drive, and then re-load all my software on that drive?

My operating drive has bad sectors. Bought a new one to load on Mavericks and re-load all my software. How can I do this?

If your Pro came with install CD's or DVD's, you would use them to install the OS that came with the computer, and then upgrade to Mavericks. If Snow Leopard came with your Pro, as it says in your profile, that should work.
If your Pro did not originally come with installer discs, then you would need an OSX recovery disk assistant
OS X Recovery Disk Assistant v1.0 , or an internet connection, to do internet recovery OS X: About OS X Recovery
Another option is a Mavericks installer disk, which you can make yourself with DiskMaker X
Once you get the Mavericks installer downloaded, but before you install it, make an installer with DiskMakerX so you'll have it for the next time you need it. The installer deletes itself after you do the install.

Similar Messages

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.
I want so set up itunes on my laptop and make sure that I get all of my old music and any music shared from my sons' itunes accounts. Do I have to set up itunes on my new laptop first and then use the same logins? Really concerned about losing any music, etc.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

How can I uninstall Quicktime Pro 7.4.5 and then install on a new system?

Hi,
How can I uninstall Quicktime Pro 7.4.5 and then install on a new system?
I've got a new computer and I want to uninstall Quicktime Pro 7.4.5 and then install on the new system. Maybe I'm overlooking something, but a bunch of other applications have easy 'uninstall' functions right in the application toolbar. Why doesn't Quicktime?????
Thanks.

I've read that Q/T is not just a simple application but in reality, a major component of the OS. This is where it varies from other similar acting apps like WMV, AVI, FLV etc. To butress this statement, in a vague way, I remember seeing a graphic of the Mac OS when Apple was first pushing "X". QuickTime was in the same general area of depth in programming as UNIX.
So, you might not want to delete all of QuickTime just the Reg Key which should/could/might put you back to the non Q/T Pro functionality and thence legal to install on another machine.
Just be certain that the version on the new machine is the same as on the old machine or expect to buy a new $30 key.
Cheers-
Mark

Im switching email accounts on my itunes account am the computer isnt recognizing purchases made from my other account on the new one (apps). How can I sign in with my new account and get the purchases apps on both accounts?

Im switching email accounts on my itunes account am the computer isnt recognizing purchases made from my other account on the new one (apps). How can I sign in with my new account and get the purchases apps on both accounts?

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

HT201269 Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

- The iTunes backup that iTunes makes included photos in the camera roll. If yo go to iTunes>Preferences>Devices what is the date of the backup? Is it when the photos were on the iPod? You have to restore from that backup.
- What may have happened is that you backup the iPod after you restored the iPod but before restoring from backup. iTunes only keeps one backup and overwrites the previous backup with the changes.

How can i extract a person from a picture and then animate the person

how can i extract a person from a picture and then animate the person

Basically you select the person using the various selection tools, copy the selection to the clipboard, and paste the selection onto the destination picture. Then use the Move tool to resize/reposition the person as necessary. Here is a tutorial demonstrating this as well as some advanced techniques.
http://home.earthlink.net/~msand42/PSE/composite/

How can i back up voicemails on my pc and then be able to listen to them

How can I back up voicemails to my PC and then be able to listen to them on my PC (click and play in quick-time or similar player vs storing in some type of unreadable file type)? I have googled and the only solution seems to involve buying a program. If so, what is the best program to purchase?

3rd party software like this one http://www.wideanglesoftware.com/touchcopy/index.php

HT4623 How can I get rid of this new update and go back to the previous one and how can I register a complaint with Apple?

How can I get rid of this new 7.0.2 update and go back to the previous one and how can I register a complaint with Apple?

You can't go back.
You can leave feedback: http://www.apple.com/feedback

HT1349 Itouch serial #9C******203. I have a new computer and want to retrieve all of the music that I have purchased on i Tunes. How do I get my library back?

I have a new computer and want to retrieve all of my purchased itunes back into my library. How do I do this?
<Serial Number Edited by Host>

Hi cummingsak,
If you are looking to transfer your iTunes library to a new computer, you may find the following article helpful:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Regards,
- Brenden

How can I copy with render to new drive?

I am using an external hard drive to work on a project and I need to move everything to a new external drive, but the renders and some media files will not connect. All my preferences are set to each external hard drive on each project. The project is in HD and I do not want to re-render if I can help it. I can reconnect media and for some reason all the sections show up, but have to do it one section at a time and I would like to select all. Some renders show up, but not all. I can plug up the old external hard drive and everything is there...renders and all. How can I have a backup or copy of the same project with renders and not have to render twice?

Thanks for the reply. FCP seems to have this problem from all the post I've read and it seems Apple has nothing to say about it. We have hours of footage to assemble and right now the only option seems is to go to the more expensive setup and ditch FCP, but I'm not sure Avid will be the solution and for 34,000, it's a bit much to see how well it works. I hope in a few weeks something will be released that will solve this problem, but I don't expect that to take place. If we go with SD, the re-render is not that big a deal, but for HD, it's a bit much to re-render every time FCP has this problem. I plan to purchase a new system along with the latest version of FCS, but I was having these issues when I was using FCP 4 HD and the solution was to be fixed with the next release.

HT204003 How can I load all giftcards into one

i have a whole bunch if the same brand giftcards on my passbook how can i put them all into 1

I have two files the file with the main method has four inner classes.
i tried to use the jar cvf command but it only jars the file i say to jar the inner classes dont get jared. Is there a way of using one command to jar my two files and include the inner clases that are in one of the files?

Old HHD failed, how can I install an OSx onto new drive?

My old stock HDD failed, and I had to replace it. I have time machine on an external hard drive, and am using it to communicate here. However, when I try to install an OSx (Mountain Lion) onto my new drive, it says: "Cannot install OS. Contact AppeCare." I used disk utility to make sure it says Mac OS Extended (Journaled). What can I do?

Try this: Boot the MBP with the OPTION+COMMAND+R keys. The display should result in a picture with a revolving globe. If you follow the directions, this will connect you to the Apple servers. You then will be able to install the original OSX that came with the MBP (Lion). Do not forget to format the HDD in Disk Utility>Erase (to Mac OS Extended (Jourrnaled)) before installing the OSX.
If you had Mt. Lion on that MBP, it should be in your App Store account. You may download it from there.
You will need a solid Internet connection.
Ciao.

How can I open a PDF stored in IXOS and then display it in a BSP

Hello gurus,
I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the line selected. (even if I know it depends on an ID attribute of that assignment block) I want to to call a transaction launcher with the url for the pdf in the IXOS that has an ID that identifies which line in the assignment block the user has clicked the pdf icon for (does that make sense?)
Therefore, I am assuming the PDF should correspond to the relance ID of the row in the assignment block, but I would like more information as per the business logic involved in able to achieve the desired results for this particular specification. I already confirmed that the XURL or any other attribute in the BOL object does not contain the URL to use for this. I have looked at the class I was told that it may contain the required business logic for determining which PDF in IXOS to fetch for a particular row, and I am currently trying to reverse engineer the logic through looking at other code and using the debugger, but so far I haven'T had much luck.
Here are some questions I have now for the functional side in the meantime:
1) Can we fetch the PDF in IXOS for each line of an assignment block?
2) Which URL should I call with the transaction launcher? a URL link to the PDF on the IXOS system??
3) Do we have to configure a transaction in the IMG to be launched?
4) Do we have to create a logical link there that I will make dynamic to call the right PDF for each table line?
5) Are there any existing examples of this or a similar functionality/ logic that I could refer to, preferably in CRM 7 WebUI?
6) Do you have any code to just display a PDF in a new window? Or prompt a download?
One possible way I thought of would be for me to have a logical link defined in the IMG, that I could call passing it different attributes (eg. some object id, etc) and then return the PDF and display it in the UI in a new browser window by itself. Alternatively, we can just prompt a download. What do you think would be the optimal behaviour here?
Please do not hesitate to propose any potential solution. Any partial answers/ links to wikis/ other threads, anything would be much appreciated.
Thank you in advance.
Best regards,
Jonathan Laplante

Hi,
I partially answered your question in another posting but I feel that you´re in the wrong forum for your problem. This is for BSP development and you talk about CRM.

How can I store a form name with path and then call form from a table

Is it possible that any form that I built I store that form in some table in DB and then call that form from table, if yes, then how can i get this functionality. I am not very experience in form and do not know if it can be done because i think if it is possible then this can be a good security for application and easy to handle as well.
Thanks in advance
Maz

If you have a Forms block based on this table:
declare
module varchar2(100);
begin
module := :block.column;
call_form ( module ) ;
end;If you don't have any blok based on that table
declare
module varchar2(100);
begin
select module_name
into module
from ...
where ...
call_form ( module ) ;
end;Francois

How can I edit budgeted cost/unit in excel and then import into P6?

I would like to edit resource assignements (budgeted cost/unit) month by month in an excel file, and then import it into P6. Is this possible?
It seems that the resource assignments month by month cannot be exported to an excel file. Is there anyone who can help me find a solution to this problem?
Thanks a lot.
By the way, I foud I can use the reporting function to get the excel file with month by month resource assignment information and can edit the values, but I cannot then import the changes into P6.

not sure if this helps at all, but..
when you refer to importing units (or costs) by period, do you mean past financial period actual data or future bucket planning data ?
if it's the former, you can select corresponding financial period fields (period actual units and/or cost) for export to excell. unfortunately not sure why they are marked (*) which means they cannot be modified and reimported just as easily.
an update of the same fields in the P6 database can be performed through P6 Timesheets (or similar solutions) through SDK (and possibly API or Webservices).
if it's the latter, i don't see how *"future bucket planning" or any other non-linear distribution* (which can be a bit too much and quite time consuming in p6), can be made easier in excell.
i think predefined non-linear resource curves are a good compromise, but if that doesn't suit your needs, you can define *"custom resource curves"* of your own for resource assignments using the resource usage spreadsheet.
you would need to enter values for budgeted units for several future intervals (depending on the timescale)
e.g. for months 1 to 4, you manually set budgeted units to 1, 0, 2 and 4h respectively, resulting in a total of budgeted units for the assignment of 7h.
if you then modify the 7h to 70h, the sistem will adjust the period values proportionally to the initial values, resulting 10, 0, 20 and 40 h respectively.
best of luck

How can I load mavericks on a new drive, and then re-load all my software on that drive?

Similar Messages

Maybe you are looking for