How can I load .mov links into a layer

Hello ... I'm new to the dreamweaver forum ... fresh off the
boat from the land of GoLive ...
I'm sure there is an easy way to do this, I just need to be
pointed in the right direction.
I'm working on a dance studio website and I have prepared
about 20 quicktime movies.
I'd like to list the names of the numbers and have them play,
when clicked, in a layer on the same page.
Sort of like youtube, the way the selected video always plays
in the same window.
Thanks in advance,
Netty

Not everyone has the QT plug-in installed for their browser.
The people who
don't have it won't be able to see your .mov files. If you
convert your .mov
files to .flv, you can use a single player and playlists like
this AV player
from Wimpy.
http://www.wimpyplayer.com/affiliates/idevaffiliate.php?id=836
Flash has the advantage of being lower in file size and has
much wider
browser support on both Win & Mac systems.
If you don't have an .mov to .flv converter, Riva Flv encoder
is free:
Riva Download -
http://www.download.com/Riva-FLV-Encoder/3000-2140_4-10320097.html
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Netty2Cent" <[email protected]> wrote in
message
news:fse19r$4e9$[email protected]..
> Hello ... I'm new to the dreamweaver forum ... fresh off
the boat from the
land
> of GoLive ...
>
> I'm sure there is an easy way to do this, I just need to
be pointed in
the
> right direction.
> I'm working on a dance studio website and I have
prepared about 20
quicktime
> movies.
> I'd like to list the names of the numbers and have them
play, when
clicked, in
> a layer on the same page.
> Sort of like youtube, the way the selected video always
plays in the same
> window.
>
> Thanks in advance,
> Netty
>

Similar Messages

  • HT204003 How can I load all giftcards into one

    i have a whole bunch if the same brand giftcards on my passbook how can i put them all into 1

    I have two files the file with the main method has four inner classes.
    i tried to use the jar cvf command but it only jars the file i say to jar the inner classes dont get jared. Is there a way of using one command to jar my two files and include the inner clases that are in one of the files?

  • How can I load TPX Pantones into CS6 Photoshop palette?

    I use the Pantone papers for Fashion and Home and want to be able to load/download these into my photoshop palette rather than having to print out my designs and then match them to the papers by going tirelessly through the book. I've looked on the Pantone website and their links are useless and seem to be sending me round in circles. Photoshop seems to have every other type of Pantone pre-loaded apart from the TPX ones I need! Can any one help?

    You would need the ACB files from Pantone for the TPX books, and install those in the Photoshop presets folder.
    Sorry, but there are several of the more obscure Pantone books that we haven't shipped yet. (and it takes quite a bit of time to clean up and validate them all)

  • How can I import .mov file into dvd studio pro?

    Hi,
    I have a .mov file and want to but a dvd with menu and chapters. But when I try to import the .mov file into dvd studio pro it says Incompatible format. How can I import my .mov file in to dvd studio pro?

    Two ways…
    Transcode into a codec like Pro Res, import into DVDSP and let it do the encoding.
    Or better yet:
    Import into Compressor, choose a DVD preset and let Compressor encode. It will make two files, separate video and audio files. Import those into DVDSP.
    Good luck.
    Russ

  • How can I load my Xlet into commercial STB emulator

    Hi
    I have developed some Xlets, and I could run and view the output of those Xlets in XleTView emulator.Now I want to run these xlets in commerial emulators like MHDK STBS .But I don't know how to load these Xlets into that emulator and run
    Any help would be greatly approiated.
    Thanks in advacne.

    hi
    if you want to test Xlets in the same real environment of a digital television, you can use [ OpenCaster|http://www.avalpa.com/the-key-values/15-free-software/33-opencaster] , it's a free software stand-alone carousel server that can do all the DVB tables to and a sample audio video playout server.
    You just need a supported PCI card that can modulate COFDM and drive directly a DVB STB (for DVB-T terrestrial, you could use a [Dektec DTA110T|http://www.dektec.com/Products/DTA-110T/index.asp], BTW i've no business interest with them.. )
    Hope it helps.
    bye
    andrea Venturi

  • How can I load preview images into an extra file?

    Hi,
    I've got a question concerning those preview images. I wrote a plugin which uses the actual paths of the photos in the catalog an stores those paths of each photo into a log file. Then an external program has access to that file for further handling. So now I would like to use preview photos instead of the raw images. First, because the user might want to use the picture he/she edited with Lightroom; And then because of the size.Processing a preview image of level 5 would be more efficient than the original photo.
    So how can I get those preview photos? And more important: is it possible to store them in an extra file in a jpg format for instance, so that an external program can make use of them?

    Look at source code in PreviewExporter plugin.
    robcole.com - PreviewExporter

  • How can I combine all buttons into one layer?

    I have 5 movie clip buttons in 5 separate layers. Is there a way to merge them all into one layer? i did that and they stop working.

    i want to make a zoomable map with buttons on them.
    also, if i want to animate every button on I dont want to have to tween every layer.

  • How can i load Metadata file into georaster?

    Hello everybody,
    I stone a tiff file in my db,I stone tiff file like this:
    1.create GeoRaster Table:
    create table rm_image_t(
    georid number,
    file_type varchar2(30),
    image_file mdsys.sdo_georaster);
    2.create trigger:
    exec sdo_geor_utl.createdmltrigger('rm_image_t','image_file');
    3.Create raster data table:
    create table rdt1 of mdsys.sdo_raster(
    primary key(rasterid,pyramidlevel,bandblocknumber,rowblocknumber,columnblocknumber))
    lob(rasterblock) store as (nocache nologging);
    4.Grant:
    exec dbms_java.grant_permission('OPER','SYS:java.io.FilePermission','c:\aaa.tif','read');
    call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission','c:\aaa.tif','read' );
    call dbms_java.grant_permission('OPER','SYS:java.io.FilePermission', 'c:\aaa.tif','read' );
    call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission','c:\aaa.tif','read' );
    call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission','c:\aaa.tif','read' );
    call dbms_java.grant_permission('OPER','SYS:java.io.FilePermission', 'c:\aaa.tif','read');
    call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission','c:\aaa.tif','read');
    5.Insert tiff file:
    DECLARE
    geor SDO_GEORASTER;
    BEGIN
    -- Initialize an empty GeoRaster object into which the external image
    -- is to be imported.
    INSERT INTO rm_image_t
    values( 1, 'TIFF', sdo_geor.init('rdt1') );
    -- Import the TIFF image.
    SELECT image_file INTO geor FROM rm_image_t
    WHERE georid = 1 FOR UPDATE;
    sdo_geor.importFrom(geor,'blocksize=(512,512) compression=DEFLATE', 'TIFF', 'file','c:\aaa.tif');
    UPDATE rm_image_t SET image_file = geor WHERE georid = 1;
    COMMIT;
    END;
    Then:
    SQL> SELECT t.georid,
    2 sdo_geor.validategeoraster(t.image_file) isvalid
    3 from rm_image_t t order by georid;
    GEORID ISVALID
    1 TRUE
    But I do not know how to load tiff_file's metadata into georaster.
    Can you help me?thanks!

    My metadata file called aaa.met,it has the following info:
    GROUP = METADATA_FILE
         PRODUCT_CREATION_TIME = 2004-02-12T15:09:20Z
         PRODUCT_FILE_SIZE = 703.1
         STATION_ID = "EDC"
         GROUND_STATION = "SGS"
         GROUP = ORTHO_PRODUCT_METADATA
              SPACECRAFT_ID = "Landsat7"
              SENSOR_ID = "ETM+"
              ACQUISITION_DATE = 2001-10-03
              WRS_PATH = 138
              WRS_ROW = 036
              SCENE_CENTER_LAT = +34.6152272
              SCENE_CENTER_LON = +91.7569675
              SCENE_UL_CORNER_LAT = +35.5648302
              SCENE_UL_CORNER_LON = +90.9958720
              SCENE_UR_CORNER_LAT = +35.2772270
              SCENE_UR_CORNER_LON = +92.9740331
              SCENE_LL_CORNER_LAT = +33.9414953
              SCENE_LL_CORNER_LON = +90.5596099
              SCENE_LR_CORNER_LAT = +33.6605964
              SCENE_LR_CORNER_LON = +92.5005228
              SCENE_UL_CORNER_MAPX = 318373.500
              SCENE_UL_CORNER_MAPY = 3937531.500
              SCENE_UR_CORNER_MAPX = 497638.500
              SCENE_UR_CORNER_MAPY = 3903787.500
              SCENE_LL_CORNER_MAPX = 274455.000
              SCENE_LL_CORNER_MAPY = 3758352.000
              SCENE_LR_CORNER_MAPX = 453691.500
              SCENE_LR_CORNER_MAPY = 3724636.500
              BAND1_FILE_NAME = "aaa.tif"
              GROUP = PROJECTION_PARAMETERS
                   REFERENCE_DATUM = "WGS84"
                   REFERENCE_ELLIPSOID = "WGS84"
                   GRID_CELL_ORIGIN = "Center"
                   UL_GRID_LINE_NUMBER = 1
                   UL_GRID_SAMPLE_NUMBER = 1
                   GRID_INCREMENT_UNIT = "Meters"
                   GRID_CELL_SIZE_PAN = 14.250
                   GRID_CELL_SIZE_THM = 57.000
                   GRID_CELL_SIZE_REF = 28.500
                   FALSE_NORTHING = 0
                   ORIENTATION = "NUP"
                   RESAMPLING_OPTION = "NN"
                   MAP_PROJECTION = "UTM"
              END_GROUP = PROJECTION_PARAMETERS
              GROUP = UTM_PARAMETERS
                   ZONE_NUMBER = +46
              END_GROUP = UTM_PARAMETERS
              SUN_AZIMUTH = 147.9348938
              SUN_ELEVATION = 46.4220192
              QA_PERCENT_MISSING_DATA = 0
              CLOUD_COVER = 0
              PRODUCT_SAMPLES_PAN = 17814
              PRODUCT_LINES_PAN = 15754
              PRODUCT_SAMPLES_REF = 8907
              PRODUCT_LINES_REF = 7877
              PRODUCT_SAMPLES_THM = 4454
              PRODUCT_LINES_THM = 3939
              OUTPUT_FORMAT = "GEOTIFF"
         END_GROUP = ORTHO_PRODUCT_METADATA
         GROUP = L1G_PRODUCT_METADATA
              BAND_COMBINATION = "123456678"
              CPF_FILE_NAME = "L7CPF20011001_20011231_04"
              GROUP = MIN_MAX_RADIANCE
                   LMAX_BAND1 = 191.600
                   LMIN_BAND1 = -6.200
                   LMAX_BAND2 = 196.500
                   LMIN_BAND2 = -6.400
                   LMAX_BAND3 = 152.900
                   LMIN_BAND3 = -5.000
                   LMAX_BAND4 = 241.100
                   LMIN_BAND4 = -5.100
                   LMAX_BAND5 = 31.060
                   LMIN_BAND5 = -1.000
                   LMAX_BAND61 = 17.040
                   LMIN_BAND61 = 0.000
                   LMAX_BAND62 = 12.650
                   LMIN_BAND62 = 3.200
                   LMAX_BAND7 = 10.800
                   LMIN_BAND7 = -0.350
                   LMAX_BAND8 = 243.100
                   LMIN_BAND8 = -4.700
              END_GROUP = MIN_MAX_RADIANCE
              GROUP = MIN_MAX_PIXEL_VALUE
                   QCALMAX_BAND1 = 255.0
                   QCALMIN_BAND1 = 1.0
                   QCALMAX_BAND2 = 255.0
                   QCALMIN_BAND2 = 1.0
                   QCALMAX_BAND3 = 255.0
                   QCALMIN_BAND3 = 1.0
                   QCALMAX_BAND4 = 255.0
                   QCALMIN_BAND4 = 1.0
                   QCALMAX_BAND5 = 255.0
                   QCALMIN_BAND5 = 1.0
                   QCALMAX_BAND61 = 255.0
                   QCALMIN_BAND61 = 1.0
                   QCALMAX_BAND62 = 255.0
                   QCALMIN_BAND62 = 1.0
                   QCALMAX_BAND7 = 255.0
                   QCALMIN_BAND7 = 1.0
                   QCALMAX_BAND8 = 255.0
                   QCALMIN_BAND8 = 1.0
              END_GROUP = MIN_MAX_PIXEL_VALUE
              GROUP = PRODUCT_PARAMETERS
                   CORRECTION_METHOD_GAIN_BAND1 = "CPF"
                   CORRECTION_METHOD_GAIN_BAND2 = "CPF"
                   CORRECTION_METHOD_GAIN_BAND3 = "CPF"
                   CORRECTION_METHOD_GAIN_BAND4 = "CPF"
                   CORRECTION_METHOD_GAIN_BAND5 = "CPF"
                   CORRECTION_METHOD_GAIN_BAND61 = "CPF"
                   CORRECTION_METHOD_GAIN_BAND62 = "CPF"
                   CORRECTION_METHOD_GAIN_BAND7 = "CPF"
                   CORRECTION_METHOD_GAIN_BAND8 = "CPF"
                   CORRECTION_METHOD_BIAS = "IC"
                   BAND1_GAIN = "H"
                   BAND2_GAIN = "H"
                   BAND3_GAIN = "H"
                   BAND4_GAIN = "L"
                   BAND5_GAIN = "H"
                   BAND6_GAIN1 = "L"
                   BAND6_GAIN2 = "H"
                   BAND7_GAIN = "H"
                   BAND8_GAIN = "L"
                   BAND1_GAIN_CHANGE = "0"
                   BAND2_GAIN_CHANGE = "0"
                   BAND3_GAIN_CHANGE = "0"
                   BAND4_GAIN_CHANGE = "0"
                   BAND5_GAIN_CHANGE = "0"
                   BAND6_GAIN_CHANGE1 = "0"
                   BAND6_GAIN_CHANGE2 = "0"
                   BAND7_GAIN_CHANGE = "0"
                   BAND8_GAIN_CHANGE = "0"
                   BAND1_SL_GAIN_CHANGE = "0"
                   BAND2_SL_GAIN_CHANGE = "0"
                   BAND3_SL_GAIN_CHANGE = "0"
                   BAND4_SL_GAIN_CHANGE = "0"
                   BAND5_SL_GAIN_CHANGE = "0"
                   BAND6_SL_GAIN_CHANGE1 = "0"
                   BAND6_SL_GAIN_CHANGE2 = "0"
                   BAND7_SL_GAIN_CHANGE = "0"
                   BAND8_SL_GAIN_CHANGE = "0"
              END_GROUP = PRODUCT_PARAMETERS
              GROUP = CORRECTIONS_APPLIED
                   STRIPING_BAND1 = "NONE"
                   STRIPING_BAND2 = "NONE"
                   STRIPING_BAND3 = "NONE"
                   STRIPING_BAND4 = "NONE"
                   STRIPING_BAND5 = "NONE"
                   STRIPING_BAND61 = "NONE"
                   STRIPING_BAND62 = "NONE"
                   STRIPING_BAND7 = "NONE"
                   STRIPING_BAND8 = "NONE"
                   BANDING = "N"
                   COHERENT_NOISE = "N"
                   MEMORY_EFFECT = "N"
                   SCAN_CORRELATED_SHIFT = "N"
                   INOPERABLE_DETECTORS = "N"
                   DROPPED_LINES = N
              END_GROUP = CORRECTIONS_APPLIED
         END_GROUP = L1G_PRODUCT_METADATA
    END_GROUP = METADATA_FILE
    END
    I want load it into db and query the tif_file use coordinates.
    Can you pls tell me how to do it?

  • How can I load movie on (onPress) and then check if the invoked has not been called by any other members before? Thx

    Hello Everyone,
    I would highly appreciate your wisdom and advice on this
    functionality. Lets say I have two
    movieclips on the stage(ClipA, ClipB). I would like user to
    be able to click on any of them and, this click
    will invode a createclip function which pretty much creates a
    dynamic movieclip and loads
    whatever I assign to it such other existing clips within the
    library. The only problem I have
    makeing the functionality work is that I would like to limit
    the function call to one at a time.
    So if the user clicks on ClipA, function createclip would get
    invoke and will attach the assigned
    movie clip. And when user clicks on ClipB, I would like to
    end the function call that was invoked
    by the ClipA and then then allow ClipB to invoke the
    function.
    Pretty much it would a logic like:
    if(createClip = true)
    end it;
    else
    createClip();
    When a movie is attached, can it be unloaded or unattached?
    I don't know how to write a function that would check if
    function createClip() has
    already been invoked. I would highly appreciate any direction
    in this.

    If the objective is just to get a unique list of authors based on your key, you could use the REPLACE statement in MySQL which functions as an "insert on duplicate key update" type of construct.
    [http://dev.mysql.com/doc/refman/5.0/en/replace.html|http://dev.mysql.com/doc/refman/5.0/en/replace.html]
    Catching an exception to detect dupes is functional but not very elegant. If you use REPLACE then you know your statements will always work. The drawback is that the statement is not portable across databases.

  • In vsn 6.0.2 how can I paste a link into the body of a Yahoo e-mail and have the pasted result appear as a link?

    o/s Windows XP Home
    vsn of Firefox 6.0.2
    Step 1) open firefox
    Step 2) copy link from address bar into clipboard
    Step 3) compose message in Yahoo
    Step 4) paste contents of clipboard into body of the e-mail
    result: the pasted value does NOT become a hyperlink
    <on same pc, with same contents in clipboard>
    Step 5) open IE
    Step 6) compose message in Yahoo
    Step 7) paste contents of clipboard into body of the e-mail
    result: the pasted value becomes a hyperlink ... the fact that the link becomes a hyperlink in the IE browser makes me think that there may be something in the Firefox browser that is controlling whether the pasted value becomes a link.
    I'm not sure, but I believe the update to firefox 6.0.2 was with the past few days.
    I'm not sure, but I do not believe the symptoms from steps 1 - 4 were present a few days ago
    Questions:
    1) could this feature have been introduced in 6.0.2?
    2) I would prefer it if the pasted value would become a
    hyperlink when working in firefox; what steps do I need to take to make this happen?
    Thank you

    Now Tony, I know you can't hear my tone on a forum post but I was not complaining, simply stating facts . This change brought several people in my office to a grinding halt in a long established workflow that is really rather simple (and I thought was already assumed from the original post above ):
    1) Select a set of records in FileMaker Pro 12 and export only their e-mail addresses as a CSV file.
    2) Open that CSV file in Excel.
    3) Copy the column of e-mail address.
    4) paste into the appropriate recipient field in Mail.
    5) Send
    If I were to complain it would be about Apple's typically opaque approach to updates. There is no granular explanation of why changes were made or even "what" changes were made.
    Complaining is futile since Apple is Apple and is unlikely to change, but sometimes it is cathartic to "shout into the void" .
    I had thought about doing something with a formula in Excel and your suggestion was simple and helpful. Again, however, it is only a workaround for a long established helpful behavior that Apple has inexplicably broken/removed in Mavericks Mail.
    I, and the other posters here, would love to have the capability back rather than have to add previously unneeded steps to our workflows.
    Ultimately we may add scripting steps to the FileMaker side to export the address lists with commas inserted already if Apple ends up having permanently removed this feature.

  • How can I import movies NOT into my home folder?

    Recently got a brand new iMac with SSD and classic hard drive.
    The OS and the User folder resides on the SSD but the SSD is limited in size.
    Of course, when importing movies from camera archives or directly from a camera I don't want them to go to the Movies folder in my home folder but instead to another folder on the 2nd 2 TB hard drive.
    However, I couldn't find any setting in iMovie's preferences for this.
    There must be a way! Storing footage on that SSD doesn't make sense at all.
    So, how do I do that with the latest iMovie? (Version 9.1.x)

    On the import screen, you can select your other drive. This selection will become the default until you change it on the import screen.
    For Events that are already on the SSD, you can move them from within iMovie.
    Click View/Events By Disk.
    Now you should see both drives in the Event Library.
    Hold down the command key while dragging the small icon for your event to the icon for the disk other disk drive in the Event Library List. (if you do not hold down the command key, it will Copy, not Move)

  • How can I load xcel data into simulate arbitary signal VI

    Hello,
    I am using the labview arbitary signal creator , now i have a pattern which can be easily created in microsoft xcel but i need to load the data in the simulate arbitary signal VI so essentially i need to convert an xcel file into a LVM file . Can i somehow load the xcel data as LVM data.
    Thanks
    Ams

    Ams wrote:
    Hello,
    I am using the labview arbitary signal creator , now i have a pattern which can be easily created in microsoft xcel but...
    If you can generate it in excel, it would be even easier to generate it directly in LabVIEW. Are we still talking about the staircase funcion?
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=221036
    LabVIEW Champion . Do more with less code and in less time .

  • How can i load a image into a midlet?

    Hi, i placed the png file together wif the midlet in the src directory.
    Image img = Image.createImage("title.png");
    I tried the above code but when i try to load the image in got this error
    Failed loading image.
    anione can help?

    just place your file in /res/ directory not in /src/

  • How can I load iCal data into Calendar and Address Book data into Contacts?

    I just bought a MacBook Pro running Yosemite. Migration Assistant could not read the Backup of my old, dead iMac, so I have been transferring data manually. So far Contacts and Calendar are the only Apps I have not been able to set up.

    What OS was the iMac running? I ask because where data is stored can change.

  • How can I load an external SWF into a movie clip that's inside other movie clip?

    Hi.
    I creating my first flash (actionscript 3.0) website but I'm
    stuck with a visual effect I want to create.
    I have a window on my website called contentWindow. Every
    time you click a button this window is supposed to leave the stage,
    load the requested content and return to the stage.
    The sliding window is a movie clip with 83 frames, 21 to
    enter the stage, 21 to leave the stage again, 20 for nothing (its
    just to simulate the loading time) and 21 to return to the stage.
    Now my goal is, when the user clicks on a navigation button,
    the window exits the stage, loads an external SWF with the content,
    and then returns to the stage.
    I've the "window" movie clip with an instance name of
    "contentWindow". Inside there is another movie clip with an
    instance name of "contentLoader". The content that the user
    requested should appear inside the "contentLoader".
    Now, when the contentWindow leaves the stage, I get this
    error message:
    quote:
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    at rwd_fla::MainTimeline/trigger()
    If I switch
    "contentWindow.contentLoader.addChild(navLoader);" for
    "contentWindow.addChild(navLoader);" it works fine, but the
    external SWF doesn't move with the window.
    How can I load an external SWF into a movie clip that's
    inside other movie clip?

    Hi,
    Recently, I have been putting together a flash presentation.
    And I am just wondering if the following might help you, in your
    communication with the said swf file:
    loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
    onComplete);
    function onComplete(event:Event):void
    event.target.content.thinggy_mc.y -= 100;
    Not the best example, but this allows you to target a mc
    within an external swf file. I think if you look up this code, you
    will have an answer ;)
    Kind Regards,
    Boxing Boom

Maybe you are looking for