How can I load TPX Pantones into CS6 Photoshop palette?

I use the Pantone papers for Fashion and Home and want to be able to load/download these into my photoshop palette rather than having to print out my designs and then match them to the papers by going tirelessly through the book. I've looked on the Pantone website and their links are useless and seem to be sending me round in circles. Photoshop seems to have every other type of Pantone pre-loaded apart from the TPX ones I need! Can any one help?

You would need the ACB files from Pantone for the TPX books, and install those in the Photoshop presets folder.
Sorry, but there are several of the more obscure Pantone books that we haven't shipped yet. (and it takes quite a bit of time to clean up and validate them all)

Similar Messages

HT204003 How can I load all giftcards into one

i have a whole bunch if the same brand giftcards on my passbook how can i put them all into 1

I have two files the file with the main method has four inner classes.
i tried to use the jar cvf command but it only jars the file i say to jar the inner classes dont get jared. Is there a way of using one command to jar my two files and include the inner clases that are in one of the files?

How can I load my Xlet into commercial STB emulator

Hi
I have developed some Xlets, and I could run and view the output of those Xlets in XleTView emulator.Now I want to run these xlets in commerial emulators like MHDK STBS .But I don't know how to load these Xlets into that emulator and run
Any help would be greatly approiated.
Thanks in advacne.

hi
if you want to test Xlets in the same real environment of a digital television, you can use [ OpenCaster|http://www.avalpa.com/the-key-values/15-free-software/33-opencaster] , it's a free software stand-alone carousel server that can do all the DVB tables to and a sample audio video playout server.
You just need a supported PCI card that can modulate COFDM and drive directly a DVB STB (for DVB-T terrestrial, you could use a [Dektec DTA110T|http://www.dektec.com/Products/DTA-110T/index.asp], BTW i've no business interest with them.. )
Hope it helps.
bye
andrea Venturi

How can I load preview images into an extra file?

Hi,
I've got a question concerning those preview images. I wrote a plugin which uses the actual paths of the photos in the catalog an stores those paths of each photo into a log file. Then an external program has access to that file for further handling. So now I would like to use preview photos instead of the raw images. First, because the user might want to use the picture he/she edited with Lightroom; And then because of the size.Processing a preview image of level 5 would be more efficient than the original photo.
So how can I get those preview photos? And more important: is it possible to store them in an extra file in a jpg format for instance, so that an external program can make use of them?

Look at source code in PreviewExporter plugin.
robcole.com - PreviewExporter

How can i load Metadata file into georaster?

Hello everybody,
I stone a tiff file in my db,I stone tiff file like this:
1.create GeoRaster Table:
create table rm_image_t(
georid number,
file_type varchar2(30),
image_file mdsys.sdo_georaster);
2.create trigger:
exec sdo_geor_utl.createdmltrigger('rm_image_t','image_file');
3.Create raster data table:
create table rdt1 of mdsys.sdo_raster(
primary key(rasterid,pyramidlevel,bandblocknumber,rowblocknumber,columnblocknumber))
lob(rasterblock) store as (nocache nologging);
4.Grant:
exec dbms_java.grant_permission('OPER','SYS:java.io.FilePermission','c:\aaa.tif','read');
call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('OPER','SYS:java.io.FilePermission', 'c:\aaa.tif','read' );
call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('OPER','SYS:java.io.FilePermission', 'c:\aaa.tif','read');
call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission','c:\aaa.tif','read');
5.Insert tiff file:
DECLARE
geor SDO_GEORASTER;
BEGIN
-- Initialize an empty GeoRaster object into which the external image
-- is to be imported.
INSERT INTO rm_image_t
values( 1, 'TIFF', sdo_geor.init('rdt1') );
-- Import the TIFF image.
SELECT image_file INTO geor FROM rm_image_t
WHERE georid = 1 FOR UPDATE;
sdo_geor.importFrom(geor,'blocksize=(512,512) compression=DEFLATE', 'TIFF', 'file','c:\aaa.tif');
UPDATE rm_image_t SET image_file = geor WHERE georid = 1;
COMMIT;
END;
Then:
SQL> SELECT t.georid,
2 sdo_geor.validategeoraster(t.image_file) isvalid
3 from rm_image_t t order by georid;
GEORID ISVALID
1 TRUE
But I do not know how to load tiff_file's metadata into georaster.
Can you help me?thanks!

My metadata file called aaa.met,it has the following info:
GROUP = METADATA_FILE
     PRODUCT_CREATION_TIME = 2004-02-12T15:09:20Z
     PRODUCT_FILE_SIZE = 703.1
     STATION_ID = "EDC"
     GROUND_STATION = "SGS"
     GROUP = ORTHO_PRODUCT_METADATA
          SPACECRAFT_ID = "Landsat7"
          SENSOR_ID = "ETM+"
          ACQUISITION_DATE = 2001-10-03
          WRS_PATH = 138
          WRS_ROW = 036
          SCENE_CENTER_LAT = +34.6152272
          SCENE_CENTER_LON = +91.7569675
          SCENE_UL_CORNER_LAT = +35.5648302
          SCENE_UL_CORNER_LON = +90.9958720
          SCENE_UR_CORNER_LAT = +35.2772270
          SCENE_UR_CORNER_LON = +92.9740331
          SCENE_LL_CORNER_LAT = +33.9414953
          SCENE_LL_CORNER_LON = +90.5596099
          SCENE_LR_CORNER_LAT = +33.6605964
          SCENE_LR_CORNER_LON = +92.5005228
          SCENE_UL_CORNER_MAPX = 318373.500
          SCENE_UL_CORNER_MAPY = 3937531.500
          SCENE_UR_CORNER_MAPX = 497638.500
          SCENE_UR_CORNER_MAPY = 3903787.500
          SCENE_LL_CORNER_MAPX = 274455.000
          SCENE_LL_CORNER_MAPY = 3758352.000
          SCENE_LR_CORNER_MAPX = 453691.500
          SCENE_LR_CORNER_MAPY = 3724636.500
          BAND1_FILE_NAME = "aaa.tif"
          GROUP = PROJECTION_PARAMETERS
               REFERENCE_DATUM = "WGS84"
               REFERENCE_ELLIPSOID = "WGS84"
               GRID_CELL_ORIGIN = "Center"
               UL_GRID_LINE_NUMBER = 1
               UL_GRID_SAMPLE_NUMBER = 1
               GRID_INCREMENT_UNIT = "Meters"
               GRID_CELL_SIZE_PAN = 14.250
               GRID_CELL_SIZE_THM = 57.000
               GRID_CELL_SIZE_REF = 28.500
               FALSE_NORTHING = 0
               ORIENTATION = "NUP"
               RESAMPLING_OPTION = "NN"
               MAP_PROJECTION = "UTM"
          END_GROUP = PROJECTION_PARAMETERS
          GROUP = UTM_PARAMETERS
               ZONE_NUMBER = +46
          END_GROUP = UTM_PARAMETERS
          SUN_AZIMUTH = 147.9348938
          SUN_ELEVATION = 46.4220192
          QA_PERCENT_MISSING_DATA = 0
          CLOUD_COVER = 0
          PRODUCT_SAMPLES_PAN = 17814
          PRODUCT_LINES_PAN = 15754
          PRODUCT_SAMPLES_REF = 8907
          PRODUCT_LINES_REF = 7877
          PRODUCT_SAMPLES_THM = 4454
          PRODUCT_LINES_THM = 3939
          OUTPUT_FORMAT = "GEOTIFF"
     END_GROUP = ORTHO_PRODUCT_METADATA
     GROUP = L1G_PRODUCT_METADATA
          BAND_COMBINATION = "123456678"
          CPF_FILE_NAME = "L7CPF20011001_20011231_04"
          GROUP = MIN_MAX_RADIANCE
               LMAX_BAND1 = 191.600
               LMIN_BAND1 = -6.200
               LMAX_BAND2 = 196.500
               LMIN_BAND2 = -6.400
               LMAX_BAND3 = 152.900
               LMIN_BAND3 = -5.000
               LMAX_BAND4 = 241.100
               LMIN_BAND4 = -5.100
               LMAX_BAND5 = 31.060
               LMIN_BAND5 = -1.000
               LMAX_BAND61 = 17.040
               LMIN_BAND61 = 0.000
               LMAX_BAND62 = 12.650
               LMIN_BAND62 = 3.200
               LMAX_BAND7 = 10.800
               LMIN_BAND7 = -0.350
               LMAX_BAND8 = 243.100
               LMIN_BAND8 = -4.700
          END_GROUP = MIN_MAX_RADIANCE
          GROUP = MIN_MAX_PIXEL_VALUE
               QCALMAX_BAND1 = 255.0
               QCALMIN_BAND1 = 1.0
               QCALMAX_BAND2 = 255.0
               QCALMIN_BAND2 = 1.0
               QCALMAX_BAND3 = 255.0
               QCALMIN_BAND3 = 1.0
               QCALMAX_BAND4 = 255.0
               QCALMIN_BAND4 = 1.0
               QCALMAX_BAND5 = 255.0
               QCALMIN_BAND5 = 1.0
               QCALMAX_BAND61 = 255.0
               QCALMIN_BAND61 = 1.0
               QCALMAX_BAND62 = 255.0
               QCALMIN_BAND62 = 1.0
               QCALMAX_BAND7 = 255.0
               QCALMIN_BAND7 = 1.0
               QCALMAX_BAND8 = 255.0
               QCALMIN_BAND8 = 1.0
          END_GROUP = MIN_MAX_PIXEL_VALUE
          GROUP = PRODUCT_PARAMETERS
               CORRECTION_METHOD_GAIN_BAND1 = "CPF"
               CORRECTION_METHOD_GAIN_BAND2 = "CPF"
               CORRECTION_METHOD_GAIN_BAND3 = "CPF"
               CORRECTION_METHOD_GAIN_BAND4 = "CPF"
               CORRECTION_METHOD_GAIN_BAND5 = "CPF"
               CORRECTION_METHOD_GAIN_BAND61 = "CPF"
               CORRECTION_METHOD_GAIN_BAND62 = "CPF"
               CORRECTION_METHOD_GAIN_BAND7 = "CPF"
               CORRECTION_METHOD_GAIN_BAND8 = "CPF"
               CORRECTION_METHOD_BIAS = "IC"
               BAND1_GAIN = "H"
               BAND2_GAIN = "H"
               BAND3_GAIN = "H"
               BAND4_GAIN = "L"
               BAND5_GAIN = "H"
               BAND6_GAIN1 = "L"
               BAND6_GAIN2 = "H"
               BAND7_GAIN = "H"
               BAND8_GAIN = "L"
               BAND1_GAIN_CHANGE = "0"
               BAND2_GAIN_CHANGE = "0"
               BAND3_GAIN_CHANGE = "0"
               BAND4_GAIN_CHANGE = "0"
               BAND5_GAIN_CHANGE = "0"
               BAND6_GAIN_CHANGE1 = "0"
               BAND6_GAIN_CHANGE2 = "0"
               BAND7_GAIN_CHANGE = "0"
               BAND8_GAIN_CHANGE = "0"
               BAND1_SL_GAIN_CHANGE = "0"
               BAND2_SL_GAIN_CHANGE = "0"
               BAND3_SL_GAIN_CHANGE = "0"
               BAND4_SL_GAIN_CHANGE = "0"
               BAND5_SL_GAIN_CHANGE = "0"
               BAND6_SL_GAIN_CHANGE1 = "0"
               BAND6_SL_GAIN_CHANGE2 = "0"
               BAND7_SL_GAIN_CHANGE = "0"
               BAND8_SL_GAIN_CHANGE = "0"
          END_GROUP = PRODUCT_PARAMETERS
          GROUP = CORRECTIONS_APPLIED
               STRIPING_BAND1 = "NONE"
               STRIPING_BAND2 = "NONE"
               STRIPING_BAND3 = "NONE"
               STRIPING_BAND4 = "NONE"
               STRIPING_BAND5 = "NONE"
               STRIPING_BAND61 = "NONE"
               STRIPING_BAND62 = "NONE"
               STRIPING_BAND7 = "NONE"
               STRIPING_BAND8 = "NONE"
               BANDING = "N"
               COHERENT_NOISE = "N"
               MEMORY_EFFECT = "N"
               SCAN_CORRELATED_SHIFT = "N"
               INOPERABLE_DETECTORS = "N"
               DROPPED_LINES = N
          END_GROUP = CORRECTIONS_APPLIED
     END_GROUP = L1G_PRODUCT_METADATA
END_GROUP = METADATA_FILE
END
I want load it into db and query the tif_file use coordinates.
Can you pls tell me how to do it?

How can I load xcel data into simulate arbitary signal VI

Hello,
I am using the labview arbitary signal creator , now i have a pattern which can be easily created in microsoft xcel but i need to load the data in the simulate arbitary signal VI so essentially i need to convert an xcel file into a LVM file . Can i somehow load the xcel data as LVM data.
Thanks
Ams

Ams wrote:
Hello,
I am using the labview arbitary signal creator , now i have a pattern which can be easily created in microsoft xcel but...
If you can generate it in excel, it would be even easier to generate it directly in LabVIEW. Are we still talking about the staircase funcion?
http://forums.ni.com/ni/board/message?board.id=170&message.id=221036
LabVIEW Champion . Do more with less code and in less time .

How can i load a image into a midlet?

Hi, i placed the png file together wif the midlet in the src directory.
Image img = Image.createImage("title.png");
I tried the above code but when i try to load the image in got this error
Failed loading image.
anione can help?

just place your file in /res/ directory not in /src/

How can I load iCal data into Calendar and Address Book data into Contacts?

I just bought a MacBook Pro running Yosemite. Migration Assistant could not read the Backup of my old, dead iMac, so I have been transferring data manually. So far Contacts and Calendar are the only Apps I have not been able to set up.

What OS was the iMac running? I ask because where data is stored can change.

How can I load .mov links into a layer

Hello ... I'm new to the dreamweaver forum ... fresh off the
boat from the land of GoLive ...
I'm sure there is an easy way to do this, I just need to be
pointed in the right direction.
I'm working on a dance studio website and I have prepared
about 20 quicktime movies.
I'd like to list the names of the numbers and have them play,
when clicked, in a layer on the same page.
Sort of like youtube, the way the selected video always plays
in the same window.
Thanks in advance,
Netty

Not everyone has the QT plug-in installed for their browser.
The people who
don't have it won't be able to see your .mov files. If you
convert your .mov
files to .flv, you can use a single player and playlists like
this AV player
from Wimpy.
http://www.wimpyplayer.com/affiliates/idevaffiliate.php?id=836
Flash has the advantage of being lower in file size and has
much wider
browser support on both Win & Mac systems.
If you don't have an .mov to .flv converter, Riva Flv encoder
is free:
Riva Download -
http://www.download.com/Riva-FLV-Encoder/3000-2140_4-10320097.html
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Netty2Cent" <[email protected]> wrote in
message
news:fse19r$4e9$[email protected]..
> Hello ... I'm new to the dreamweaver forum ... fresh off
the boat from the
land
> of GoLive ...
>
> I'm sure there is an easy way to do this, I just need to
be pointed in
the
> right direction.
> I'm working on a dance studio website and I have
prepared about 20
quicktime
> movies.
> I'd like to list the names of the numbers and have them
play, when
clicked, in
> a layer on the same page.
> Sort of like youtube, the way the selected video always
plays in the same
> window.
>
> Thanks in advance,
> Netty
>

How do I import colour swatch into CS6 photoshop?

color Swatch

You can download a Theme from Adobe Color CC in .ase (Adobe Swatch Exchange) format. In the Swatches panel in PhotoShop open the panel menu (top-right corner) and select Load Swatches...
Your theme swatches will be added to the bottom of the current ones.

How can I load an external SWF into a movie clip that's inside other movie clip?

Hi.
I creating my first flash (actionscript 3.0) website but I'm
stuck with a visual effect I want to create.
I have a window on my website called contentWindow. Every
time you click a button this window is supposed to leave the stage,
load the requested content and return to the stage.
The sliding window is a movie clip with 83 frames, 21 to
enter the stage, 21 to leave the stage again, 20 for nothing (its
just to simulate the loading time) and 21 to return to the stage.
Now my goal is, when the user clicks on a navigation button,
the window exits the stage, loads an external SWF with the content,
and then returns to the stage.
I've the "window" movie clip with an instance name of
"contentWindow". Inside there is another movie clip with an
instance name of "contentLoader". The content that the user
requested should appear inside the "contentLoader".
Now, when the contentWindow leaves the stage, I get this
error message:
quote:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at rwd_fla::MainTimeline/trigger()
If I switch
"contentWindow.contentLoader.addChild(navLoader);" for
"contentWindow.addChild(navLoader);" it works fine, but the
external SWF doesn't move with the window.
How can I load an external SWF into a movie clip that's
inside other movie clip?

Hi,
Recently, I have been putting together a flash presentation.
And I am just wondering if the following might help you, in your
communication with the said swf file:
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
onComplete);
function onComplete(event:Event):void
event.target.content.thinggy_mc.y -= 100;
Not the best example, but this allows you to target a mc
within an external swf file. I think if you look up this code, you
will have an answer ;)
Kind Regards,
Boxing Boom

How can I load data into table with SQL*LOADER

how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)

Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961

How can I load a graphic in SOFFCONT1 into an SAP picture control?

At my customer site, GOS attachments to PM notifications are stored in SOFFCONT1, so I can't use cl_bds_document_set to get a URL that I can pass to the load method of the SAP picture control.
How can I load the actual graphic in SOFFCONT1 into an SAP picture control?
Or do I have to configure IW22 so it stores in BDS content servers, not SOFFCONT1?
If this is the case, how do configure IW22 so GOS knows to store attachments as BDS documents rather than in SOFFCONT1 ???
Thanks
djh

This explains how to make sure your PC and bin documents are saved on your HTTP content server, instead of in the database:
http://help.sap.com/saphelp_nw04/helpdata/en/c0/1aca5823ee11d3a2db00a0c943858e/content.htm

How can I load up some pdfFiles from adobe Reader on my iPad into my Adobe Creative Cloud?

How can I load up some pdfFiles from adobe Reader on my iPad into my Adobe Creative Cloud?

There is no app for uploading files from an iPad to the Adobe Creative Cloud, and the iPad security model does not allow for upload of files from the browser. The Adobe Touch Apps do provide syncing up to the Creative Cloud but none of them are really designed for working with pdf files.
You can connect your iPad and move the files to your computer. From your computer you can upload the files via a web browser.

How can I stop downloading pictures into iPhoto and start down loading into a portable hard drive?

How can I stop downloading pictures into iPhoto and start down loading into a portable hard drive?

You could use the Image Capture application.

How can I load TPX Pantones into CS6 Photoshop palette?

Similar Messages

Maybe you are looking for