How Can I Locate The Gimp + Open Office After Install

I am a fairly new Mac user so please make your reply easy to follow. I am running Panther 10.3.9 on a G3/400, 320 megs, dsl internet. I have just installed The Gimp, a free open source image manipulation program, the Phoyoshop alternative + Open Office, the free open source Microsoft Office alternative. Both installs took place within the X11 framework but now I cannot locate them. Where have they gone? For example, when I right click on a .jpeg file, then click "open with", The Gimp is not even in the list although I want it to be my main photo program. The same when I right click on a text file, Open Office is not on the list. I just want to put a program icon for both programs on the desktop for easy access. Thanks, Ken.

Unfortunately you are using an old version of OS X, and older versions of Gimp or OO are not as well refined as they now are.
If you are using 10.3.9 you might try Seashore which is not as complete as Gimp, but does not require X11 and is also Open Source. PixelMator is another decent image editor but it is shareware as is Acorn. Photoshop Elements is Adobe's low cost alternative to Photoshop. Find demos and downloads at VersionTracker or MacUpdate.
NeoOffice Aqua 3.0 is another application like Open Office that will run on a PPC without X11, but requires Tiger. The earlier version that will run on Panther is version 2.2.5. Look for these at www.neooffice.org.
All of these applications will run slower on PPC machines than on Intel machines. There's really little you can do about it. If you need something relatively fast but with fewer features you can use AppleWorks.

Similar Messages

How can I stop the shared mode service after install a single instance DB ?

Hello
I installed a single instance DB and don't use the dispatcher ,
is there a way to stop the service as below?
Oracle Version: 11g R2
OS: Linux
Service "o11g2XDB.oracle.com" has 1 instance(s).
Instance "o11g2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: CentOS53.test.smtp, pid: 3061>
(ADDRESS=(PROTOCOL=tcp)(HOST=CentOS53.test.smtp)(PORT=40218))
The command completed successfully

And this is listener.ora
# listener.ora Network Configuration File: /u01/oracle/app/product/11.2.0/dbhome_1/network
/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CentOS53.test.smtp)(PORT = 1521))
ADR_BASE_LISTENER = /u01/oracle/app
I didn't configure it, so it should be a dynamic bind .

How can I download the latest Microsoft Office for my Macbook Air through the App Store?

How can I download the latest Microsoft Office for my Macbook Air through the App Store?

Welcome to Apple Support Communities
Microsoft Office is not available in the App Store. Instead, you can purchase it in the Microsoft site > http://www.microsoft.com/mac
Note that there are other apps that do the same, like Apple iWork (available in the Mac App Store) or LibreOffice, open-source and free. I recommend you to give LibreOffice a try.
If you are interested in Office for Windows, you can find it in the Microsoft Store or at shops

How can I locate the original .CR2 / Raw file from Photos in finder?

How can I locate the original .CR2 / RAW file from Photos in the finder window? I would like to know a easier way to open my files and use them in Photoshop than having to go to the Pictures folder, right clicking "show packaged contents", and manually searching for my CR2's / RAW's. It is also ridiculous to have to export the RAW file to my desktop, and then take it into Photoshop or another photo editing program. I was able to do this in iPhoto and find I cannot do so in Photos. Please help? Can you please consider adding a right click function that says "Show Original file in Finder". That would make it so much easier and better for those of us who want a simple way to access the original files and use them in other editing programs. At least with iPhoto you could go to the top menu / preferences and find your items.

http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback
Rather than use the 'Show package Contents route, the supported and safer way is to export the unmodfied original.

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How can i locate the resource file in the weblogic?

hello
in struts, i can leave some parameter in a resource file (such as "Application.properties")outside of my code,and get them in the "Action" class by the "getResource" method.
in my data access tier,i still want to use such a machanism but i can't use the "getResource()" method,for example,there is a ConnectionPool class,i want to read some parameters from a resource file ("param.properties") that is under the same directory as the ConnectionPool class,the following is the code snippet:
public static void init(DataSource ds){
myself=new ConnectionPool(ds);
java.util.Properties prop=new java.util.Properties();
try{
java.io.FileInputStream fin=new java.io.FileInputStream("./param.properties");
prop.load(fin);
}catch(Exception e){
e.printStackTrace();
System.out.println(prop.get("help.create"));
the "ConnectionPool" class is in the "com.jhtop.task.forum.db.util" package,the "param.properties" is in the same package (com.jhtop.task.forum.db.util),
but when i execute the program,it tell me that it can't find the file.if i use the absolute path,it works.
i wonder how can i locate the file path in the weblogic,or what's my current path,or how may i setup my work directory?
in tomcat,my current directory is bin directory,how about weblogic?
who can help me?thank you!

My english is bad and I'm not sure I've well understood your problem.
How have you created your file ?
Why do you put it in such a directory and not an other ?

I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

Exactly what do you mean by a 'downloader'?
Thanks
Pete

How can I download the Australian Open Tennis printable DRAWS?

How can I download the Australian Open Tennis printable DRAWS?

Things like, what version of Acrobat you have.
Link to the site where you are trying to download the DRAWS.
What happens when you try and download the PDF.

How can i locate the properties files within a ejb container?

when i develop servlet+javabean structure application,in order to imploement decoupling,i
would like to write the config information in the properties files(key-value pair),in
servlet,i use "getResourceAsStream(String relativePath)" method to retrieve the
configuration information from the properties files(i even write the SQL clause
in the files),it alwsys works well.
now,i want to implement such function within the ejb container,that is to read
a properties file from session bean,but i don't know how can i locate the file
within the ejb container by using relative path,i wonder if there is the same
method within ejb container as "getResourceAsStream(.......)" method within servlet
container?
thanks for any helps!
the code snippet is appreciated!

In general, you should look at using environment entries (variables) in the
deployment descriptors (both the war and EJB jar rather than properties
files for configuring J2EE applications. The reasons for this are many:
1. This is the official way to do it according to the spec. Properties
files are the J2SE way of doing things
2. As you note, that it's not obvious how you would (legally) read a
properties file inside an EJB.
3. It's consistent between the web and EJB part of your code
4. the weblogic console and tools have good capabilities to edit these
fields.
Kent
"zhebincong" <[email protected]> wrote in message
news:[email protected]..
>
when i develop servlet+javabean structure application,in order toimploement decoupling,i
would like to write the config information in the propertiesfiles(key-value pair),in
servlet,i use "getResourceAsStream(String relativePath)" method toretrieve the
configuration information from the properties files(i even write the SQLclause
in the files),it alwsys works well.
now,i want to implement such function within the ejb container,that is toread
a properties file from session bean,but i don't know how can i locate thefile
within the ejb container by using relative path,i wonder if there is thesame
method within ejb container as "getResourceAsStream(.......)" methodwithin servlet
container?
thanks for any helps!
the code snippet is appreciated!

How can I locate the file /Library/Keychains/FileVaultMaster.cer to reset my master password? Thanks!

How can I locate the file /Library/Keychains/FileVaultMaster.cer to reset my master password? Thanks!

The files that weren't inside the media folder on the original machine need to be copied over to exactly the same paths as they had on the source machine. See this thread for an ongoing discussion of a similar problem. See also this post on migrating the iTunes library.
tt2

Found an Ipod touch--how can I locate the owner?

I found an Ipod touch--how can I locate the owner? The Ipod requires a passcode.

You can't. Turn the iPod into your local police department, or the station closest to where you found the iPod. They have resources for identifying and contating the owner, should they wish to take that time.
Regards.

HT201472 How can I locate the last location of my iPhone 5s because it is dead and cant be located offline?

How can I locate the last location of my iPhone 5s because it is dead and cant be located when its offline?

Apple does not offer a user-searchable log of where the phone has been. Not saying they don't keep one, but I think you'd need a search warrant or work for the NSA or FBI to get access to such data.

How can I stop the "Cannot Open iTunes" dialog

How can I stop the "Cannot Open iTunes" dialog when more than one user is logged into the computer without switch to the user using and closing iTunes. Why doesn't the dialog AT LEAST have the option to 'Do not attempt to open iTunes for this User any more' instead of the lazy programmer OK button only. OR Even the Do not ask this again option.

Just adding to the last answer:
Sony Reader; free download from Sony intended to run with Sony eReaders but works quite happily without.
https://ebookstore.sony.com/download/
I prefer ADE1.7.2 to Sony Reader, and Calibre to either (for DRM-free books),
but Sony Reader certainly worth a try to see how you get on with it.

How can you automate the monthly opening of MM periods

How can you automate the monthly opening of MM periods ????????????

RMMMPERI accepts a period/year or a date.
If you enter a date the period is derived by it.
1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working
day and use it in the periodicity restrictions.
Another possibility:
Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
Regards
Chander

How Can i retain the Shared Variable Values after PC rebooting

Hi all,
I am facing a paculiar problem with Shared Variables. I have an application in which shared variables are used for data communication.
One of the application requirement is to retain the variable values eventhough PC is rebooted or started after crashing.
As per the my understanding, the variable values will retain eventhough the PC is rebooted. But here i can observe a paculiar problem like some library variables are retaing the values while some others not. I enabled logging for all the variables.
I tried many ways. like logging enabled, logging disabled, changing variable names, changing process names etc... But i am not getting a consistent behaviour.
I hope some you can help me in solving this issue.. "How Can i retain the Shared Variable Values after PC rebooting"
Thanks and Regards,
Mir

Hi Blackperl,
Thanks for the post and I hope your well.
What do you mean by not getting consistent behaviour.. this will all depend on excatly when the crash happens i.e. before the write or after.
Surely a better method would be to log the data to a file during the reboot...
I beleived the value read back
will be the default value for the shared variable's data type.
The LabVIEW DSC 8.0 module adds more functionality to the shared variable, including initial values and alarms.
If you enable an initial value on a shared variable, when the variable
engine comes back on-line it will default to this value. Setting a bad
status alarm for the shared variable is also a good way of handling
this type of event. Additionally, if you are using a LabVIEW Real-Time
target such as Compact RIO or Compact FieldPoint, it is appropriate to
consider hosting the shared variable engine on the real-time target.
These devices have watch-dog capabilities and are typically the
hardware controlling the critical pieces of an application. Most
Windows or PC-based targets do not have these fail-safes.
I guess, if you could explain to me again that would be great. From my point of view, if I have a cRIO and a Windows PC. If the windows PC crashes, the cRIO will still update its shared variables. Then once the PC has started up its own shared variable engine, and the bindings are loaded, it will once again continue to update its copies of the variables.
Please let me know what you think,
Kind Regards,
James.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

How Can I Locate The Gimp + Open Office After Install

Similar Messages

Maybe you are looking for