How can i login in to the designer on oracle 9i?

i have just installed the developer suits...
but ,when i want to use the designer tools...
they need to enter the username, passwords,and the string..
what i have got so far is
usename:scott
passwords:tiger
string: blank
but i can't login in ......it shows up with the error info:
Message
ORA-12560: TNS: ÐÒéÊÊÅäÆ÷´íÎó
Message
RME-00220: Failed to connect to Repository
does anyone knows how to solve it?
your help will be greatly appreciate!!!!

You should read the Install Guide on setting up a Repository for Designer, how to set up subordinate users and what privileges users require to use Designer.
The Install Guide is available on OTN here: http://otn.oracle.com/documentation/designer.html
Reagrds
Sue

Similar Messages

How can I login and retrieve my user file from the trash?

I was trying to find out where all my HD had gone, which a did using ‘What Size’.
I found what looked like an old backup file so I put the file in the trash.
It turns out that the file was my user file. So now I can’t login to as the user.
How can I login and retrieve my user file from the trash?

The Digital Editions forum is here, in case this is what you are talking about:
http://forums.adobe.com/community/adobe_digital_editions
If you are not, I apologize for the misunderstanding.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

HT2731 I dont have credit card so, how can i login to itunes?

I dont have credit card so, how can i login to itunes?

If you don't have a credit card then there are instructions on this page for creating a new account (the instructions won't work with existing accounts) without giving card details : http://support.apple.com/kb/HT2534
e.g. if currently logged into an account then log out of it, find a free app in the store and click on its free 'price' and create an account during the 'buying' process.

HT5622 How can I Login to my iTunes stores

How can I login to my iTunes stores

Why didn't you say that from the start?
If you think you broke your arm, do you tell the doctor your car won't start?    No, you tell the doctor you can't drive because your arm won't work, you think it's broken.
You have to enter a method of payment, even for free apps.
This link is to acceptable payment methods:
http://support.apple.com/kb/HT5552
If you have a card on file, it may have an expired date.   You must remove it by selecting None, then add a card with a valid date.

How can i login to client

Hi friends,
iam very new to sap,i installed sap recently,i created a client how can i login to that client(i given user id:sap*,pwd:pass)
any parameter changes required

You need to change the parameter on RZ10 select the Default profile add the parameter and change the value and save & activate the profile. Restart the SAP Server and you would be able to login.
This process is widely available if you will search on google you will find out.
Regards,
Subhash

How can I change one color in design on a web site for exemple background : white to light-brown?

1. how can I change one color in design on a web site for exemple background : white to light-brown?
2. how can I edit visual bookmark on the beginning page?

This doesn't sound like a Firefox issue. I think you'd be better off with a site that offers web design tutorials. Try this one: http://www.w3schools.com/
One thing you should do though and that is to update Firefox via Help | Check For Updates.
There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
See also: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

How many pictures (or how many bytes) are we talking? Now that the pictures are imported one way to cross users is to use a removable drive (although large volumes of files preclude this).
The other is to login as the user where the pictures are, then copy them into the public drop box of the user where you want the picture.
The arrow is showing (in ths example) copy files from the Pictures folder for my user to the guest user accounts public dropbox. When you do this you may have to authenticate and you won't be able to see the results of the copy until you log in as the other user.
All users are in the folder "/Users/"

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How can i highlight text in the Adobe Difital Editions?

How can i highlight text in the Adobe Difital Editions?

You have to remember that Digital Editions was never designed to have 'text
editor' capabilities. BTW: Bluefire and Overdrive also have such
limitations. Put in another frame of reference, DE presents you with the
ebook, as you would be presented with a physical printed book.
==============

How Can I get a copy of Designer 6.5

We would like to get a copy of the Designer 6.5 Limited Production release so that we can begin evaluating the tool and planning for the migration from 2.1.2 to 6i. How can I get a copy of Designer 6.5?

Hello to all
another option is to download and install the portable firefox version from the next link, if you want to use it occasionally : http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox%2C%20Portable%20Ed./
portable version is more flexible, and you can delete it any time without worries
please read the [http://forums.mozillazine.org/viewtopic.php?f=23&t=2249039 ultimate guide from '''the-edmeister''']
thank you

After my computer has been sent to Apple my password is not working, how can I login again?

Hello, after my computer had been broken I sent it to apple, but somehow I can not login and I am using a guestuser right now. I am pretty sure that I am using writing in the right password but it does not let me in. How can I login again?

change the password. 10.6, 10.7

How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

Sean and Andy -
I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
So here's what does NOT work for me...
     (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
     (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
     (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
     (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
     (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
     (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'-- routers, but does not show mine. (??!!)
     (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
     (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID!
So, now asking Sean and Andy (or anyone else) for further suggestions... ??? As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
Any advice would be appreciated! TIA.
Ed

HT203128 iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.

iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...

You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on.

How can I merge folder with the same name so that the content does not replace the other

How can I merge folder with the same name so that the content does not replace the other?

>
That's only a good idea if the semantics of sayHello
as defined in MyInterface suggest that a
RemoteException could occur. If not, then you're
designing the interface to suit the way the
implementing classes will be written, which smells.
:-)But in practice you can't make a call which can be handled either remotely or locally without, at some point, dealing with the RemoteException.
Therefore either RemoteException must be part of the interface or (an this is probably more satisfactory) you don't use the remote interface directly, but MyInterface is implemented by a wrapper class which deals with the exception.

How can i login in to the designer on oracle 9i?

Similar Messages

Maybe you are looking for