How can I login to Airport Express Router not using an iPhone?

I need to change other settings in this router, such as: bandwith.

Use AirPort Utility on your Mac running OS X (10.8.5)
Macintosh HD > Applications > Utilities > AirPort Utility

Similar Messages

How can I get the Airport Express to handle all the PPPoE stuff?

Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
Direct ethernet cable connection to my Macbook works fine.
When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
thanks
Paul

HT5022 How can I configure an AirPort Express 802.11g on Mac OSX 10.8.5?

I can't configure an Airport Express 802.11g using a MacBook Air with MacOS X 10.8.5 installed.
AirPort Utility 5.6.1 cannot be installed on a computer running OS 10.8.5...
Help!

As you know you cannot administer the older 802.11g AirPorts from Macs running the latest OS X versions or from an iOS device.
You still have a few options to do so:
Use a Mac running OS X Lion 10.7.2 or lower.
Use a Windows PC running Windows 7 or lower.

Hi, i have zte open c with Fos 1.3 and there is no russian keyboard in settings, how can i install it? (i do not use linux) may be there is firmware update?

hi, i have zte open c with Fos 1.3 and there is no russian keyboard in settings (rus locale working fine), how can i install it? (i do not use linux) may be there is firmware update or something in market?

To give an update on this issue, here is the latest information I have:
"Indeed the current eBay Open C doesn't come with root privilege. Now ZTE is going to put an engineering build on their website for users to download and flash."
I will update this thread as I know more information. Thank you for your patience.
- Ralph

How can I do an APP presentation online while using my Iphone?

how can I do an APP presentation online while using my Iphone?

You cannot use other countries itunes stores.
Sorry

How can i setup my airport express with my retina display macbook, how can i setup my airport express with my retina display macbook

Hi i have a macbook pro with retina display and these mac doesnt have a lan port, so i cant connect the aiport express to my mac with a cable.
Thanks for the help

You would need the AirPort Utility app for your iPad in order to administer the AirPort Express. Note: The version of this AirPort Utility will not support older 802.11g AirPort base stations. The AirPort Utility is available from the Apple App Store.

How can I extend an Airport Express in WLAN mode with an additional Airport Express box

I'm trying to extend the existing WLAN with an additonal Airport Express box. I read through a bunch of comment throughout the communities here but didn't find what I'm looking for.
My actual Installation consists:
A Time Capsule attached to the Internet router which set up my 1. WLAN range
This WLAN has been extended with an Airport Express BOX creating my extended 2. WLAN range
Now I intend the extend the 2nd WLAN of the Airport Express BOX with an additional Airport Express (creating a 3rd WLAN range) but don't find a way on how to set it up correctly.
The physical situation of the location dosen't allow me to add / replace cabeling (Ethernet or similar). If there is any chance I'd like to avoid power-line connections. And, I'm aware of the impacted bandwith on WLAN / WLAN extensions, but can deal with this.
Regards and thanks for any advice

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

How can I configure an airport express to connect extra speakers to those on my Apple TV?

Hi,
I'm using a net gear router to play music on speakers connected to my tv via Apple TV. I want to set up another set of speakers upstairs mot play the same music throat the house. Can I connect another set of speakers to the airport express and have all speakers running in harmony? any advice gratefully received!
Cheers, Dean

You can connect (up to five practically) AirPlay Speakers and stream to them simultaneously from a single iTunes host. Your Apple TV would be one of those AirPlay Speakers.
Each additional AirPlay Speaker would be configured to join the existing wireless network. For additional details on configuring an AirPort Express for AirPlay, please see the following Apple Support article.

How can I connect multiple airport express to airport extreme?

I have an Airport Extreme that is connected to my cable modem. I have 3 Airport Express that I would like to connect to the extreme to extend the signal in my home. I was able to connect 1 but I have been unable to successfully connect the other 2.
Can anyone tell me how o accomplish this?
Thanks

Power off all four AirPorts in any order that you want
Wait a minute, then power up the AirPort Extreme
Wait another minute and power up the AirPort Express that is working
Move the other two Express devices to the same room or close proximity to the AirPort Extreme
Power up one Express for a minute or two and leave the other Express off for now
Hold in the reset button on the back of the Express for 10 seconds and release
Allow a full minute for the Express to restart to a slow, blinking amber light status
Click the WiFi icon at the top of the Mac's screen
Look for a listing of New AirPort Base Station
Just below that, click on AirPort Express
That will start up the setup wizard. It will take minute to analyze things and then suggest that the Express be configured to extend the AirPort Extreme network.
Enter a short simple name to call the Express, something like Express2 for example, and click Next
The utility will set thing up for you. When you see the message of Setup Complete, click Done
Now move the Express upstairs and power it up. If the signal must pass through a ceiling, that is a tough assignment, since the ceiling is likely absorbing about half of the signal going through
Report on your results

How can I add additional airport expresses to my system that are not being recognized by Airport utility?

I recently purchased time capsule to upgrade my wireless system. I have 3 airport expresses in my network; I was able to reconfigure one, but the other 2 won't reconfigure. They are not recognized by Airport utility after being reset; the time capsule and one reconfigured airport express shows up. I would like to use the other two airport expresses to extend my wireless system. I would appreciate any help and suggestions.

Unfortunately, you will have to use Apple's WDS setting for all of the devices on the network....Time Capsule, new AirPort Express and older AirPort Express devices.
That is going to slow things down tremendously on the network.
WDS only operates at "g" wireless speed, so you lose any "n" speed advantage of your newer devices.
Worse, the bandwidth is cut in half on the entire network for each device that is set up as "relay" or "remote" on the system.
So, the first "remote" (or relay) cuts wireless speed from 54 Mbps down to 27 Mbps. The second cuts everything down to about 14 Mbps and the third drops everything down to about 7 Mpbs. That is much slower than the old wireless "b" systems.
Compare that to "n" speeds of 130 Mbps or up to 300 Mbps (if you are using 5 GHz) and you can easily see that you are losing more than 90% of the speed capability on the network.
Do you even want to consider doing this?

How can I Connecticut two Airport Express with One Time Capsula?

Only by Wifi or by LAN in a row?

What are you trying to accomplish with the AirPort Express devices?
Where will the Express devices be located in relation to the Time Capsule?
If you are planning to use the Express devices to "extend" the wireless range of your network, Ethernet LAN will always provide far better performance than trying to connect the Express devices using wireless only.
You have the option of connecting both AirPort Express devices directly back to two LAN <-> ports on the Time Capsule....or....connecting one Express back to the Time Capsule and then connecting the second Express to the first Express using Ethernet. This assumes that you have a "new" Express with both WAN and LAN ports.
If you choose wireless only, both Express devices will connect back directly to the Time Capsule, so both of them should be located where they can receive a strong signal from the Time Capsule wireless.
A "hybrid" approach can also work. Connect one Express to the Time Capsule using an Ethernet cable and then setup the second Express to connect to the first Express using wireless only.

How can I get my airport express work with Zyxel 2812HNU-F1?

Hi,
I previously had a Thompson Speedtouch router and my Airport expres worked just fine. But now my internetprovider give me a new router the Zyxel 2812HNU-F1 and my airport express doesn't work properly. I use an ethernetkabel to connect the airport express with my router. The lamp on the aiport express turns green, but I cannot normally open internetpages etc, and sometimes a webpage partially appears. If I connect my ethernetkabel in my MBP, the internetconnection just works normally.
Do you know what I have to do to let my Aiport expres work with the Zyxel 2812? I already resetted the express and in the airport utility it doesn't show that there is a problem.
Greets,
Don

Obviously my objective was different (just use the Airport Express as an Airplay speaker over wired ethernet only), but for my case I finally managed to fix it: In the Zyxel LAN configuration I've set the LAN port (4) to half-duplex and 10Mbit (only!) instead of "auto" and then streaming audio works flawlessly! This is just crazy stupid and is a Zyxel issue I'm sure. For now I'm happy!
To make the Airport wired only: disconnect wire -> factory reset -> create new (wireless) network (plus settings) -> then Network Router Mode = Off (Bridge Mode) -> then Disable wireless -> Save settings -> only then connect ethernet cable

HT3728 How can I get my airport express to show on my network ?

I did a hard reset on my airport express and now all it does is flash amber. I have thw airport utility open but it only shows my airport extreme.

I don't know what you mean by "hard reset."
I'm a great believer in the KISS principle.
Configuration is simple if you start from a factory default condition. Then connect the Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations. After confirming that it works, insert your desired administrative and WiFi passwords.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!

Is there any one now know how can i setup and airport express?

that is my question

but now he work
alex_h1 wrote:
Hi,
If you want to set up your AirPort Express to extend your wireless network, then take a look at the information in the article below.
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n) - Apple Support
Have a great weekend,
Alex H.

Can connect to my airport express but not able to get email or internet?

Hi just got the airport express and my iphone connect to it but cant get any email og go on the internet?

Please try a full, extended modem reset and power cycle of the network as follows:
Push the reset button on the modem (if present)
Power off the modem
Pull the battery (if easily accessible)
Power off all other network devices, order is not important
Wait at least 30 minutes
Make sure the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme and re-install the modem battery if it was removed
Power up the modem first and let it run for 4-5 minutes by itself
Power up the AirPort Extreme the same way
Power up each device one at a time about a minute apart
Check for operation
If problems continue, I would have the device checked out at the Apple store.

How can I login to Airport Express Router not using an iPhone?

Similar Messages

Maybe you are looking for