How can I look at old labview Vis and tell what version they were written with?

Someone gave me some code from about 1998/99...need to determine what version it was writtern in and if I can run the same vi with labview 8.0?

The above link will give you the original version, something you might not really need to even know.
For the second part of your question " ...and if I can run the same vi with labview 8.0", the logical procedure would be to simply try to open it in LabVIEW 8.0. Takes a few seconds for an instant answer.
Most often, this works without any problems. In the worst case the VI is slightly broken and you need to tweak a few minor things.
What does the code do? Is it plain computation? Does it involve interaction with hardware (DAQ, etc.)?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

How can I look at old text messages

How can I look at old text messages that I haven't deleted my phone just won't load to let me go up that far.?

As Ann said, it does depend on your phone. One third party app that works on many phones (especially older models, but not all phones) is BitPim ( http://www.bitpim.org/ ) but it can potentially harm/brick your phone if you don't know what you are doing - use it with caution. I have used it successfully to get texts and photos off an old flip phone that was deactivated and had no sd card.
Newer smartphones can download apps that will give you the ability to print out texts.

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

HT4759 How can i delete an old iCloud account and start using my own using my Apple ID? If I don't have the old password??

How can i delete an old iCloud account and start using my own using my Apple ID? If I don't have the old password??

If your device is signed into an old iCloud ID that is an earlier version of the ID you want to sign in with, do the following:
If you are using iMessage and FaceTime, make sure you are signed into these services with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless you are using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

Macbook Pro 2009 runs slowly and freezes. Can someone look at this Etrecheck report and tell me what's wrong?

Macbook Pro 2009 runs slowly and freezes. Can someone look at this Etrecheck report and tell me what's wrong?
Hardware Information:
          MacBook Pro (13-inch, Mid 2009)
          MacBook Pro - model: MacBookPro5,5
          1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 6 days 16:17:8
Disk Information:
          FUJITSU MJA2160BH FFS G1 disk0 : (160.04 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    MacBook HD (disk0s2) /: 159.18 GB (29.38 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.spsys.driver.IOKitDriver          (1.0.0d1)
          com.parallels.kext.usbconnect          (8.0 18615.948847)
          com.parallels.kext.hypervisor          (8.0 18615.948847)
          com.parallels.kext.hidhook          (8.0 18615.948847)
          com.parallels.kext.netbridge          (8.0 18615.948847)
          com.parallels.kext.vnic          (8.0 18615.948847)
          com.parallels.filesystems.prlufs          (2010.12.28)
Startup Items:
          StartupComponent: Path: /Library/StartupItems/StartupComponent
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.fitbit.galileod.plist 3rd-Party support link
          [System] com.spsecure.daemon.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.spsecure.useragent.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] [email protected]
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          AdobeResourceSynchronizer
          Dropbox
          EvernoteHelper
          Fitbit Connect Menubar Helper
          Google Chrome
Internet Plug-ins:
          Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
          AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
          Move-Media-Player: Version: npmnqmp 071503000004 3rd-Party support link
          fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          MacFUSE 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          Amazon MP3 Downloader:          Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Time Machine not configured!
Top Processes by CPU:
              37%          prl_vm_app
              10%          WindowServer
               9%          Google Chrome
               1%          hidd
               1%          Agent
Top Processes by Memory:
          602 MB          prl_vm_app
          115 MB          Google Chrome
          82 MB          Google Chrome Helper
          82 MB          Mail
          70 MB          Microsoft Word
Virtual Memory Information:
          137 MB          Free RAM
          782 MB          Active RAM
          718 MB          Inactive RAM
          1.50 GB          Wired RAM
          23.02 GB          Page-ins
          1.21 GB          Page-outs

Hey greytdogs,
I would give some of the suggestions in this link a shot:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

How can iPhone videos sent to another iPhone be made clear like they were recorded even though it sent as a text. with iMessage it's clear but when it's not available the quality *****, how can I make a received vid clear again??? help

how can iPhone videos sent to another iPhone be made clear like they were recorded even though it sent as a text. with iMessage it's clear but when it's not available the quality *****, how can I make a received vid clear again??? help

This is determined by your carrier. SMS/MMS is a poor man's email and by that I mean SMS/MMS has major restrictions and limitations compared to email but is a cash cow for cell phone carriers.
Upload the video to YouTube when connected via wifi and send the YouTube link via text.

Is there a way to look in the sys drive and tell what L8 uses, and doesn't?

I loaded Logic Studio entirely onto my system drive ( 80 gig) - I thought I had to. The rest (3rd party plugs/sounds, exs samples, etc.), are on other drives.
Anyway, space is too tight on my system drive. When I installed LogicStudio I tried to get rid of stuff that I knew would be duplicated and therefore redundant, but some are still there.
My question is, is there a way to look at the contents of the drive and tell what is currently part of L8 and what is unnecessary or redundant? I don't know what to throw out, and something's got to go!
Id like to avoid a complete reinstall - and even if I did that, I'd still have to figure out what to throw away, and wouldn't be sure.
Thanks.

I just checked this, and I'm confused. There is 4.5 gig in the app support/logic folder and 12 gig in the garageband folder.
But in the library/app support/audio/appleloops folder there is also almost 29 gig of sounds. This would be essential too, I assume.
So I have almost 7 gig of sounds in my user/library/audio/appleloops. Since I don't have any custom apple loops, can I be confident that these are now redundant? Opinions appreciated.
Thanks in advance... I just don't understand this part of things!

How can I change the old Apple ID, and i want to use my new Apple ID, i dont know the password because my phone is a gift for me of my sister what should i do, i cant update my iphone4 pls help me

How can i use my new Apple ID, instead of using the old Apple ID what will i do to delete the old Apple ID in my phone

Heres the situation guys, my sister is working abroad, when she went home, she gave me her iphone, I started using this phone almost a year now, when Apple noticing me to update my phone, I cant do it because i don't know the password, i create my own Apple ID and started using it just now, everytime i try to update my phone the old Apple ID kept on appearing instead of my Apple ID,

HT201320 How can i keep my email accounts separate on my ipad like they were b4 latest update?

I just installed ios7 now all my incoming email comes in together- how can i keep them separate- i have 2 email accounts?

Edit : your reply applied whilst I was typing this
This is what I see (I've removed my account names) :
And after tapping the Edit button :
If you aren't getting that then you could try closing the Mail app via the multitasking bar - press the home button to go back to the iPad's homescreen ; double-click the home button to the multitasking list ; swipe or drag the Mail app from there up and off the top of the screen ; click the home button to close the bar. Then see what shows in the Mail app
Message was edited by: King_Penguin

How can I get all of my calendars and recurring events to synch via iCloud with my iPad2?

Not all of my recurring events sych via the iCloud with my Mac and IOS devices - most specifically my iPad2. For example, my anniversary appears on my Mac and my iPhone, but not on my iPad2.
I notice that when I click on "Calendars" when the iCal app is open in my iPhone I get 2 lists of calendars - one that is labled "On my iphone" and the other that is labled "iCloud". The same two lists appear in the iCal app on my Mac. But on my iPad2 the only list that appears is "iCloud".
Can anyone help with this issue?

Welcome to the Apple community.
Contacts aren't backed up and therefore aren't restored from a back up either. They are synced with the cloud, so after you have restored your device you should be able to sign back into your account and turn syncing back on again. If you need to check if your contacts are in the cloud, go to iCloud.com on a computer.

Can't receive long (2part) text messages and Picture messages say they were sent be they aren't

I can't receive long (2 part) text messages, I only receive the first part or the second part but never the entire text. Also my picture messaging is unpredictable, sometimes I can send them sometimes I can't, it always tells me they were sent but the receiver doesn't always get them. Do I have to change something in my settings to fix these problems?
Thanks
Amy

My phone has also stopped receiving long texts, (2 part messages). It has now started to receive only part 2. If you find a way to resolve this i would like to know too. Thanks shan

How can I transfer my old iTunes (playlists and all) from the hard drive of my old dead computer to the iTunes of my new one?

So my old PC died before I managed to back up my iTunes library onto DVDs. I do however have the hard drive from the old PC with all the program files, files and folders on. I also have the iPhone 4, which has my top rated playlist on but that only holds about 20% of my entire music collection on.
Is it possible to somehow find all my old iTunes music, videos, playlists, podcasts etc and transfer it into the iTunes on the new PC without losing anything?
Thanks for reading :-)

im trying to do the same. how do you
Copy the entire iTunes folder from <User's Music> on the old machine into <User's Music> on the new one?
im sorry i am totally inept when it comes to this stuff. can you walk me thru the steps to copy? please

How can I import my old iPhoto library into my new version of iPhoto?

Just purchased new iMac and am trying to import my old iPhoto library, but keep getting Unreadable Files message. I have the library file and see that it shows up as an iPhoto Library under the Kind column.

Now that you're tried to open the correct library once see if you can perfor the following: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

How can I sort multiple tables on a single page as if they were one continuous table?

I have a single narrow column of numbers that cover multiple pages. I would like to do either of the following: break that long single column into multiple colums that fit on one page and are still able to be sorted in that arrangement OR sort the long column as it is (spread out over multiple pages) and then break that long sorted column down into multiple segments that can be placed onto a single page.
I have been sorting the long single column, then copy and pasting sections from the column onto a new page so that I can print them on a single page.
I am hoping there is a more elegant method to do this.

Hi Walt,
Sorting is one of the things that changed between Numbers '09 and Numbers 3. If you are on Mountain Lion I want to assume you are using '09. Is that true?
This will work in '09 and 3. Table one is a single column with entries 1-89.
A2 ==INDEX(Table 1 :: $A,ROW())
B2 =INDEX(Table 1 :: $A,ROW()+35)
C2 =INDEX(Table 1 :: $A,ROW()+70)
The formulas are filled down.
You can adjust the formulas in B and C to reflect how many rows fit on your page.
quinn

Can anyone look at the crash reports and tell me what I or Mozilla ned to do?

I have 2-3 dozen last few weeks s - how do I fix these problems. I have cleaned my PC with RegistryBooster
Crash ID from latest. Had problems printing (not in gmail, though) that seem to have gone away - but not the crashes

The crash report links to this bug report: https://bugzilla.mozilla.org/show_bug.cgi?id=503772
You can try to disable or uninstall all unneeded extension and start with the ones added by security software.
The Shield Deluxe 2010 Antiphishing Toolbar
[email protected]
See [[Troubleshooting extensions and themes]]
See also http://kb.mozillazine.org/Firefox_crashes and [[Firefox crashes]]

How can I look at old labview Vis and tell what version they were written with?

Similar Messages

Maybe you are looking for