HOW CAN I MAINTAIN AN INTERNET CONNECTION

Touchsmart 610 randomly "loses" internet connection. Refreshing several times on desktop restores it. Modem is good (been replaced); other pc's in house don't have the problem.

Hi:
What model wireless adapter do you have in your PC?
What operating system? and is it 32 or 64 bit?
Maybe a driver update will help.
If you have the Broadcom wireless card, try the latest driver for it.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Paul

Similar Messages

How can you enable the internet connection to use iTunes?

I cannot access iTunes Store. How can I resolve it?

Hello ElJohnC
If you are having issues with accessing the iTunes store, the article below will give some troubleshooting steps to resolve the issue.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can i share my internet connection

I'm having problems sharing my internet connection wirelessly (from my netgear router) with my TV via the AX.
I've managed to setup the Airtunes - streamling nicely through the house.
But under the internet options, sharing and the bridge option are disabled (greyed out).
Please advise. Many thanks.

To enable the AXn's Ethernet port, it would need to be reconfigured as an Ethernet bridge. Apple calls this configuration a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz.

How can I maintain a single connection between Forms 9i and JNI?

I am creating a JNI interface into a legacy application written in Pro C. Currently this legacy system is accessed from Forms 6i through userexits. Under this setup the Pro C application is able to share the connection to the DB established by forms. I want to mimic this functionality over the web using JNI as the link between my web components and the legacy application.
ie. I want to share the DB connection established by my web components with my Pro C application.
Thus far I have been unable to find any documentation on how to do this.
Any ideas would be very helpful.
Information about how Oracle Forms shares its connection with userexits would also be helpful.

The Pro*C application is linked in to Forms, and runs in the same process space, which is how the session is shared.
You can't share the Forms session outside of Forms. So it's not possible to do what you want.
Regards,
Robin Zimmermann
Forms Product Management

How can i share my internet connection from macbook pro to my iphone?

i need your help..

On your MBP, from the Apple menu, select System Preferences, click the Sharing icon, and then click Internet Sharing. Select the way your computer is connected to the Internet under "Share your connection from" (ethernet probably), In the "To computers using", select the WiFi check box.
Click the WiFi Options button and assign your new network a name. Turn on encryption if you like, enter a password, and click OK.
Back in the Sharing pane, click the Start button in the Internet Sharing section.
(to turn sharing off, go to the same place and click stop.)
On your iPhone, turn on WiFi under Settings > WiFi
Your iPhone serches for WiFi networks and yours should pop up with the name you gave it. If you turned on encryption (which you should to protect your data) enter the password and click Join.

Lion to 10.7.2. - can't maintain an internet connection

I just bought a new iMac and immediately updated to the latest Lion OS (10.7.2). I connected to the internet fine initially but after a few hours of use the connection continually dropping every few seconds when I go to a new URL. It's happening with my Mail and iTunes as well. I am connected via ethernet so it's not a WiFi issue. I have to reload the pages once or twice to get them to load. Does anyone have a fix for this issue?

Hello Emma I presume your in the UK.
In the UK PPPoA is the standard PPPoE is not supported by many ISP's.
On your Mac just use DHCP in your Network settings. Do not use PPPoE.
Then login to your router's web configuration page. http://192.168.0.1 or http://192.168.1.1. Admin and Password are the usual login details for netgear routers.
use the following details
PPPoA
VC-Mux
Chap authentication
vpi and vci are 38,0
and of course use your isp username and password.
Post edited. I just noticed you had already figured out the correct details.
Message was edited by: Tim Haigh

How can i change my internet connection from Airport Extreme to my Time Machine

My laptop is connected to my Airport Extreme on the third floor.
If i take my laptop to the first floor to my Time Machine, my connection is lost with Airport Extreme.
It looks very logical to me that my laptop will automatically be connected to my Time Machine.......
But it does not......
What am i doing wrong..........has anybody an answer for me?
Thanks in advance
Regards
Patrick

Are both of your Apple routers configured for an extended or roaming network?

Can somebody explain to me how I can detect that an internet connection exists (VB)?

Can somebody explain to me how I can detect that an internet connection exists (VB)?
Peter Goossens

There is no reliable way. Better test whether you can go to where you want to go. And be prepared to support proxies, even the complex ones that require authentication.
System.Net.NetworkInformation.NetworkInterface.GetIsNetworkAvailable reports your local connectivity regardless of whether one of your connected networks has Internet access.
Microsoft's Network Awareness API (the one used in control panel\network and sharing center) use a connection test to a web site setup by Microsoft. But your customers could be behind cooperative firewalls that make this test unusable even when Internet
access is available though other means (e.g. via a local proxy server). If you want to connect to your own web site, then you can skip that and just connect to your web site instead. Even if you were able to connect to Microsoft's web site there is no guarantee
your web site would be accessible in the same network.
Visual C++ MVP

My airport express frequently drops the internet connection. Once I unplug it and re-plug it in, everything is fine until it drops the signal again. This happens on a regular basis. Is there anything I can do ensure it maintains the internet connection?

My airport express frequently drops the internet connection. Once I unplug it, and re-plug it in, my Macbook Pro17,IMac 24, iPad air and my wife's Acer 15 works fine until it drops the signal again. This happens on a regular basis. Is there anything I can do ensure it maintains the internet connection?

It is tricky..
But yes it can be done as long as you use a different IP subnet to what is being used for the internet..
So I need to know what modem router you have?? Does it have wireless as that would make it very easy?
What IP is the computer getting?
Then I can give you the details to setup wireless statically on a different subnet.

Can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option.

can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option. i want to have both the airport extremes to use a single imac for streaming music or video to my apple tv's at different places where one apple tv is in the range of one airport extreme.it's not a problem if both airport extremes have different wifi id's with separate internet.The imac which i use for streaming the music and videos is only in the range of only one airport extreme.is it possible if i can stream music or videos to my apple tv which is not in the range of same airport extreme which i use for imac but in the range of other airport extreme.
Finally what i need is i want to use two internet networks as my highest possible internet bandwidth is about 1mbps.and i know that i cant mix both the networks and make it as 2mbps.

Yes, that is possible. Please check out the following Apple Support article for details on how.

How can I get an automatic connection to wifi on startup?

We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

An 'uninterruptible power supply' that automatically steps in and takes your computer
off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
a certain degree, depending on model and should there be a valid reason to do so.
An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
for less than a replacement logic board or an hour of authorized Apple repair, the UPS
is a fairly good investment. Backup battery is user-replaceable in the better made units.
Most of them offer extra ports that do not use the battery-backup power feature. If you
need to have more items run when the power switches up/down or out, you'd need to
consider a larger capacity backup power unit. In some instances, the makers of these
(for a time, perhaps even now) did caution users to not install more than one UPS per
room when the same leg may have inadequate grounding, since these can dump the
excess surge power from several different UPS units and overload the ground.
That said, the gamble is yours. I've found to have and use these is some protection
and when away from the computer. Most settings for controlling them appear in OS X.
No additional software is required. Other settings may be on the UPS front panel.
Good luck & happy computing!

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

How can I share the internet without any network distribution?

I am facing a problem of internet sharing.
I would like to share my connection from ethernet to airport,
however, when I chose the "internet sharing" box, safari failed to connect to the internet.
After removing the tick of the box, web browsing became normal again.
how can I share the internet without any network distribution?
thanks!

You'd have to select in Sharing Preferences > Internet Sharing > Share your connection from ETHERNET, and to computers using AIRPORT.

How can I read the internet speed in a MAC?

How can I find the INTERNET SPEED in a MAC?

You typically use a free Internet Speed test. It does an upload and a download from a known site, bypassing certain configuration problems. Just do a search to find a dozen services eager to test with you (in exchange for the Ads on their pages).
Do not pay for this service, and DO NOT accept any CR@P they suggest you download to "fix" your speed. They cannot tell from outside whether you have problems, and none of the things you can download ever makes anything better.
If using Wi-Fi, one generally finds that the Wi-Fi part of the connection is the limiting factor.

How can I share my Internet from my iPhone to Airport express network?

How can I share my Internet from my iPhone to Airport express network?

YES you can! - Gotta love those "you can't" answers from people who haven't even tried. ;o)
Just have your Airport Express "Join" your iPhone. It will share your Internet connection through its Ethernet port. I currently have an AppleTV connected via Ethernet to the Airport Express. With this setup I have wireless Ethernet AND wired LAN connection. I can even AirPlay to the AppleTV and have Internet at the same time. Haven't tried a switch/hub but see no reason why it wouldn't work. This proves to be very useful to create a wired network with Internet from a cellular device without Ethernet.

HOW CAN I MAINTAIN AN INTERNET CONNECTION

Similar Messages

Maybe you are looking for