How can I make a bootable disk with some third party applications to use?

My Macbook's performance has slowed WAY down and I want to try running a couple of different tools on it to optimize it.
Thing is, some if not all of them require you to boot from a different disk, and since I got them online, I don't have bootable CDs for them.
The OS X install disk doesn't allow you to access files on your HD and neither does DiskWarrior's DVD, so is there any way at all to make a bootable CD which will show me a finder window with the tools I need or anything like that?
I KNOW that BootCD exists for older versions of mac, and frustratingly that's the only answer I have come across online despite the fact that it doesn't work for Tiger.
Please help, any advice would be greatly appreciated.

Argh, posted this in the wrong section, AND I figured out how to do it myself anyway...
Could a mod please close this? Apologies to everyone for making a balls of this

Similar Messages

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How can I make a bootable disk so as to repair my drive?

Hello,
I am away from home and not carrying my Tiger install DVD. I had three crashes after installing Safari Beta 2 days ago and now disk utility reports failure on exit when verifying my Macbook drive. To repair this I need to boot from some other medium and run Disk Utility from there. Is it possible for me to make a bootable DVD? Or a bootable USB memory stick(the one I am carrying is 1 gig in size)? Or can I download something to make it possible? thanks a lot, LJ
PS this has happened me 3 times in a year since moving to mac and it peeves me greatly that such a great OS cannot solve its own directory structure problems - the way Scandisk does for windows.

thanks for the suggestion. I have tried fsck before but for me it has never solved the problem - afterwards, verify disk in Disk Utility still reports failure on exit. Seems I get myself into the biggest possible diffs! Fsck is supposed to do even more than disk utility but I have not found it so. In my previous diffs, when I boot from another medium and run "repair disk," it (nearly!) always solves the problem. If anyone else can give me an answer I would be most grateful LJ

My Retina Mac came with 10.8, how can I make a bootable copy of 10.8?

My Retina Mac came with 10.8, how can I make a bootable copy of 10.8?

Do Internet recovery, download the installer, choose an external HD to install it to, when the comp restarts, disconnect the External HD before it turns back on.
Extract the Install.dmg and put it on your desktop, then use disk utility to install that onto your external HD.

How can I make a bootable Mavericks SD Card or DVD?

How can I make a bootable Mavericks SD Card or DVD?

Download the Mavericks install app, then run Apple's built-in Terminal command (included with the install app), where Untitled is the name of your USB stick:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
More details in http://osxdaily.com/2013/06/12/make-boot-os-x-mavericks-usb-install-drive/

How can i make an restore disk on Satellite L850-10J

Hello,
Iv'e bought an Toshiba Satellite L850-10J.
In the box it doesnt come with an CD...
So i tought it was in my PC an image of the DVD for me to burn on a blank DVD.
I didnt find it, please tell me where can i find it.
Thanks.

Hi
>How can i make an restore disk
This should be mentioned in user manual which is always preinstalled.
In my case I used the preinstalled +Toshiba Recovery Medium Creator+ software.
This Toshiba software allows you to create either an recovery disk or an recovery flash memory stick.

How can I do an startup disk with DiskWarriori included?

How can I do an startup disk with DiskWarrior included?
I want to do it with System 9.2.2. for those days that apperas an ? in the disk... buf!
I did one but the Mac didn't recognize it...
Thanks

xjulia...
Remember what I said earlier? ""The tricky parts... Then install your wanted version of Mac OS 9""...
Install is a key word here.
Launch your latest Mac OS 9 CD and run the Installer targeting the mounted image. I prefer to do a minimum universal install from within the installer. Uncheck items of no use. If your CD is an older version of Mac OS 9, run the following version of an updater. Same can be done to update your utilities so long as there is a updater available for the utility.
<hr width="300">
Copying an already installed System Folder, is a bit to be desired, as you have tons of manual trashing (fixing, weeding, etc.) to do.
<--OR-->
Bootable CDs normally contain a copy protected System Folder that is equivalent to fooling around with mother nature. It unfortunately leaves you with many CD cake boxes of coasters in the process.
<hr width="300">
By the way— A mounted image gets refreshed in a funny way. Drag the mounted image to the trash and "chug-chug". Click on the [your named].img file and a fresh image gets mounted. Just keep an eye on both as you get the feel.
...Ron

How can i make a soft return with pages shift enter does not work!

how can i make a soft return with pages shift plus enter does not work!!

On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.

How can I make Web Photo Gallery with Photoshop CS6 on Mac 10.6.8?

How can I make Web Photo Gallery with Photoshop CS6 on Mac 10.6.8?

You can use Bridge to create a web photo gallery.
Here's a video that shows you how to do it:
Hope this helps!
Julia

How can I make a bullet item with a custom Bullet character such as a check mark ?

Hi Everyone,
I'd like to make a list with Bullets, but I can find a bullet character which I am looking for. Especially I'd like to make Bullet characters available in PowerPoint, such as check mark, and others. How can I make a bullet item with a custom Bullet character or picture such as a check mark ?
Regards
Cem

Cem777 wrote:
Hi Everyone,
I'd like to make a list with Bullets, but I can find a bullet character which I am looking for. Especially I'd like to make Bullet characters available in PowerPoint, such as check mark, and others. How can I make a bullet item with a custom Bullet character or picture such as a check mark ?
Regards
Cem
Search InDesign help for "change bullet characters" (without quotes,) and use the technique described there with the Zapf Dingbat font as suggested by Peter S.
You can also use InDesign's glyphs panel (Window > Type & Tables > Glyphs) to scroll through all the character sets in all the fonts that InDesign has access to on your system, to look for check mark characters.
After you have created a paragraph style that applies the customized check-mark-bullet that you want, every time you apply that paragraph style, the custom bullet appears. So, while it's a few steps to set up the style the first time, from then on it's automatic.
If you really need a particular bullet that's not in any font you have, you'll need to search for fonts that have check mark characters and buy one or use a free one. Caution: free fonts aren't always created to the same strict standards that commercial fonts from reputable font foundries observe; free fonts sometimes cause problems when printing or exporting to PDF. You can search Google for "fonts with check mark" (without quotes.)
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imac

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 " or connect via thunderbolt to another imac
ann

You will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
Boot Using Command+R keys:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears.

I do not have master card,visa card to make my apple ID,tell me how can I make my apple ID with out master card and visa card

I do not have master card,visa card to make my apple ID,tell me how can I make my apple ID with out master card and visa card

It will if you follow, exactly, the instructions on the page that lllaass included in the post above yours : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method

How can I make my computer restart with all the same windows that were open when a shut it down?

How can I make my computer restart with all the same windows that were open when a shut it down?

That is the way Mac OS X 10.8 (aka Mountain Lion) works by default. Are you actually running that system? (See About This Mac in the Apple menu.) If so, make sure the check box in the shut down alert is checked:

How can I make Thunderbird start auto with windows start-up

how can I make Thunderbird start auto with windows start-up

You can by placing a short cut in the windows startup folder, just like any other windows program.
However if you do you are likely to encounter problems as downloading mail while the anti virus is still loading and the network is busy announcing your machines arrival to the network ( which might be a network of one) and any of a dozen other program are loading is fraught with risk of timeouts and server disconnections as well as error messages that make little sense because they are about something that is still loading.
So the bottom line is sure you can, but if there are issues take it back out of there as a first step.

How can I make a bootable disk with some third party applications to use?

Similar Messages

Maybe you are looking for