How can I make a catalog avaiable for all accounts on a laptop?
At the moment the PSE11 (windows-version) catalog is saved in my pictures folder. Because my wife also uses the laptop (with Win 8.1) I now want to move the catalog from my private folder to a public folder on the laptop that is accessible for both accounts.
1 Question: how can I move the catalog?
2. After moving: are both accounts able to access the catalog with PSE11?
3. After moving the catalog: do I need to move the folder with the pictures too (i suppose: yes)?
Any hints much appreciated.
The inability to merge accounts has been around since they first started using Apple IDs. An issue almost ten years in the making, that one.
What I did was just use my Apple ID for my iTunes purchases and create the @me.com address to go with it. However, you can sign in with both on your devices to use one for your email and sycning and the other for purchases.
Apple did include this article for us in that department: http://support.apple.com/kb/HT4895
Similar Messages
-
How can I get a single ID for all accounts?
My migration from Mobile.me to iCloud has been a exercise in frustration.
I log into the Apple site with a .me address, my apple id is a .mac address.
I log into iTunes with a different id and password. If I buy an app on the iPhone
it won't sync to iTunes because I'm not authorized.
I called before when I wasn't allowed to verify an existing email registered
at Apple and was advised to created a new email address. I did but that was a kludgy fix.
I've called twice and can't seem to get anywhere at all with this. I would,
at this point, prefer to just delete all accounts with Apple and start over. Is
this possible? I'll forgo my last few months of paid iCloud access since
I'm sure I won't use it.
This is the least Apple-like thing I've personally.The inability to merge accounts has been around since they first started using Apple IDs. An issue almost ten years in the making, that one.
What I did was just use my Apple ID for my iTunes purchases and create the @me.com address to go with it. However, you can sign in with both on your devices to use one for your email and sycning and the other for purchases.
Apple did include this article for us in that department: http://support.apple.com/kb/HT4895 -
How can i make the valueChangeListener works for all item under foreach?
Hi,
My jspx file have the following content:
<af:forEach items="#{pageFlowScope.directiveStep.paraItems}"
var="item">
<af:panelLabelAndMessage label="#{item.name}"
id="plam2"
for="soc1">
<af:panelGroupLayout id="pgl2"
layout="horizontal">
<af:selectOneChoice id="soc1"
value="#{item.howValue}"
required="true"
valueChangeListener="#{pageFlowScope.directiveStep.howToSetDirectivePropValueChange}"
autoSubmit="true">
<f:selectItem value="Set Value}"
id="si1"/>
<f:selectItem value="Choose a Value"
id="si1"/>
</af:selectOneChoice>
<af:switcher facetName="#{item.selectWay}"
id="switch1">
<f:facet name="true">
<af:selectOneChoice id="soc2"
required="true"
value="#{item.value}">
<f:selectItems value="#{pageFlowScope.directiveStep.procVarItems}"
id="si2"/>
</af:selectOneChoice>
</f:facet>
<f:facet name="false">
<af:inputText id="it1"
required="true"
value="#{item.value}"/>
</f:facet>
</af:switcher>
</af:panelGroupLayout>
</af:panelLabelAndMessage>
</af:forEach>
The ui is like:
label name | selectOneChoice : 'Set Value' or 'Choose a Value' | inputText (if it is 'Set Value') / selectOneChoice (if it is 'Choose a Value')
The weird thing is when i click the selectOneChoice of the two or later row, the ValueChangeListener will be invoked, it indeed change the value of 'selectWay' correctly. But the UI will not update. If later i do the same thing to the first row, all other rows in UI will update corrently.
Any suggestions? Very appreciated for any repiles.
Thanks.Hi,
on problem I spot is that all your components created by the forEach loop have the same ID value. I suggest you change the ID to e.g. id="soc_#{item.index}" for zhe select one choices. In addition, I don't see where you refresh components after the change
Frank -
How can I make different catalogs from the same image
How can I make different catalogs from the same image where that image has been changed in some way between the catalogs. For instance if I wanted to have a catalogs for cropped images and have 3 catalogs one for 4x6 , 5x7 and 8x10 cropping. When I tried this , if I changed a file in one catalog that same image in the other would change also.
Do not confuse the creation of the crops and the display in collections per crop ratio.
Of course one virtual copy (VC) per crop ratio is needed. If the same image should be cropped in all 3 mentioned ratios there would be 3 VCs.
The OP asked how to have/see a set of same-crop-ratios.
After having created the virtual copies for whatever crop ratio he wants, the way to display this result in the fashion asked for is via smart collections, provided they can be found. Without a plugin the naming of the VC with the crop ratio applied is a straight way to achieve that.
IF the wish is to get new crops automatically added. (See my answers 2+3)
IF the wish is to creat static collections per crop ratio for a certain set of images, I'd go as follows:
1. Select all images you want to have cropped in that way,.
2. With this selection click on the + to add another collection and fill the dialog box like this:
Then navigate into this newly created selection and perform the 4x6 crop - according to taste individually or by synchronizing the first crop.
Cornelia -
how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen
You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red. -
How can I make a bootable disk for Mountain Lion?
How can I make a bootable disk for Mountain Lion?
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion. -
How can I make a "property node" for a VI?
Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/AmirYou really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world! -
Realtek network card seems to be disappeared. how can i make it visible again for the OS?
i can't access my LAN card. somehow it is disappeared. how can i make it visible again for the OS? my OS is windows 7. thanks very much for your help
right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
Diego -
How can i make Apple id free for downloading apps
how can i make free apple ID for downloading apps?
No thats false thers an other way go to App Store ( on iphone or itunes) then choose any free app click download the App Store will ask you for your apple id the click in this dialog on create new apple id then you should select by Credit Card None, thats a trick, you don't need a credit or itunes card
PS: Sorry for my bad english -
How can I make lining number format for opentype fonts in Acrobat?
How can I make lining number format for opentype fonts in Acrobat?
I bought the Max OT font. I want the numbers on the right to look like on the left. I could do that in word, but not in adobe acrobat.
-
How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 " or connect via thunderbolt to another imac
annYou will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
Boot Using Command+R keys:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears. -
How can I make my movies pro for mac work?
How can I make my movies pro for mac work?
I have downloaded it i click on the icon but I cant make it workDelete the app using this free utlity > Download AppCleaner for Mac
Then re download the app using the same Apple ID it was originally purchased from. You won't be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
If you still have problems, I located the app developer's website. Contact details for help here > http://www.mymovies.dk/about.aspx -
How can I make more email postboxes for iPad2?
How can I make more email maps for the iPad2?
If you are on iOS 5 as your tagline suggests and it's an IMAP type account then you should get an Edit button at the top of the list of folders that you currently have on your email account. If it's a POP type account then you won't get the Edit button.
-
How can I make a rule to mark all messages sent to Mail Trash as Read?
How can I make a rule to mark all messages sent to Mail Trash as Read?
When I look at some emails on my phone, I can see from the title that I don't need to read the email so I delete it without opening it. When I go to my Macbook Pro and open mail, the number of unread messages in my Trash shows next to the name. It drives me nuts. Can I just set a rule to mark all messages sent to trash as read? If that isn't possible, I'd take just making the number not show beside the Trash folder.Just in the case that I actually do need to go back to them for some reason. I have some OCD tendencies which is also why the number beside the folder drives me nuts.
-
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I make a backup listing of all of my Firefox bookmarks, with completely written out URLs, so I can print it out from a word processing document? Please email me the answer-
[email protected]
<blockquote>duplicate. Locked. Please continue [https://support.mozilla.com/en-US/forum/1/727213 here] -MJB</blockquote>
== Firefox version
==
2.0.0.4
== Operating system
==
PPC Mac OS X Mach-O
== User Agent
==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4
== Plugins installed
==
*-Netscape Navigator Default Plug-in
*Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Test Your JVM.
*Plugin that plays RealMedia content
*The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 9.0 r260
*Provides support for Digital Rights Management
*Provides support for Windows Media.
*Java 1.3.1 Plug-in (CFM)
*Macromedia Shockwave for Director Netscape plug-in, version 8.5.1
*Java 1.3.1 Plug-inHello.
Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
Maybe you are looking for
-
With holding tax not showing in GL a/c
Hi I have made the settings for withholding tax. and iam able to deduct the tax also. while posting the invoice tds amount is credited to TDS payable GL. When i try to see the amount in TDS payable GL through FS10N iam getting error " no items exist
-
Insert Record not saving values
Hi, I am extremely new to Dreamweaver. I am using MX2004. I am trying to work with a remote database that I created in MySQL and I am using PHP. I created a PHP page added my form, added my input fields, and used the Insert Record wizard to get to my
-
I am trying to update Adobe Photoshop Elements 9. There is an update available (9.0.3). It downloads but does not install. The message I get is "This serial number is not for a qualifying product." Can you help?
-
Using Panorama Maker 4 with iPhoto troubles...
I searched and could not find anything so i decided to post. I wanted to mess around with Panorama Maker so i took a couple pics of my room and imported them into my iPhoto. After i did so, i opened up Panorama Maker and i couldn't find any of the ph
-
Can anyone tell me why this code: // The "Set" class. public class Set public static User [] arr = new User [100]; public static void main (String [] args) for (int i = 0 ; i < arr.length ; i++) arr = new User ("void", "void", "void", "void