How Can I Make a Flash Animation for TV?

I'm learning flash animation and am wondering once I save the flash file to a dvd format, how does the end-user navigate when they put the dvd into their TV? Do I need to design and incorporate a menu for the end-user? If so, how does the TV remote control navigate through this menu that was created on a Mac computer? Thank you for your help, I really appreciate it.

I don't know a lot about this subject but thought I'd give it a shot to answer. You can use Adobe Encore to create menu systems for your DVD title screen. As far as Flash is concerned I think you can import your animations into Encore's menu system though I'm not exactly sure how. If you want to just make an animation that will be played back without interactivity you would just export your Flash animation as a Quicktime MOV file and import it into After Effects for further editing and finishing. Once you render your mp4 (h.264) from AE you can bring this into Encore to author for your DVD.

Similar Messages

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How can I make my flash video load faster?

How can I make my flash video created in Flash Pro CC load faster, as of now it takes 2 minutes to load?

This is the source file for video.php:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title> VOPVIU Video
</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css" media="screen">

#flashContent { width:750; height:600; }
</style>
</head>
<body style="background-color:#6E9BD2;">
<center>
<div width="100%" height="100%">
<h3 align="center"> Victims of Political Violence in Uganda <br/> (VOPVIU)
</h3>
<table border="0" width="52%">
   <td width="80%" align="center">
    <em>
     <font color="#FFFFFF">
<strong>
<p> Victims Of Political Violence in Uganda
</p>
Number of views 344       </strong>
</font>
    </em>
   </td>
   <td width="20%" align="right">
    <form action="vopviu.php">
     <div>
<input type="submit" value="Exit Video">
</div>
    </form>
   </td>
</table>
<table width="70%" height="70%" border="0">
<td width="70%" height="70%">
<center><div id="flashContent">
<center>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="750" height="423" id="faddu_vopviu" align="middle">
<param name="movie" value="faddu_vopviu.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#666666" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />

<object type="application/x-shockwave-flash" data="faddu_vopviu.swf" width="750" height="423">
<param name="movie" value="faddu_vopviu.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#666666" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />

<a href="http://www.adobe.com/go/getflash">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>

</object>

</object>
</center>
</div>
</center>
</td>
</center>
</table>
</div>
</center>
</body>
</html>

How can I make my flash Webpage displayed same size on any screen resolution?

Hi,
How can I make my flash Webpage displayed same size on any screen resolution of my computer? Whether it is 1024 X 768 or 1280 X 960 screen resolution, the size of Webpage (Flash Webpage) should always be same so that user don't need to use horizantal scroll bar to view all the content.
And secondly, how can I scroll my webpage vertical on moving with my mouse like in the following link: The below link also shows that it's webpage size is always same on any screen resolution.
http://www.matkostankovic.com/#/portraits/oliver-mlakar/http://www.matkostankovic.com/#/about/
Thanks.

Hi,
Please do help me.
Waiting for response from anybody who can help me.to solve this problem.
Thanks.

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

How can I make a "property node" for a VI?

Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/Amir

You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world!

Realtek network card seems to be disappeared. how can i make it visible again for the OS?

i can't access my LAN card. somehow it is disappeared. how can i make it visible again for the OS? my OS is windows 7. thanks very much for your help

right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
Diego

How can i make Apple id free for downloading apps

how can i make free apple ID for downloading apps?

No thats false thers an other way go to App Store ( on iphone or itunes) then choose any free app click download the App Store will ask you for your apple id the click in this dialog on create new apple id then you should select by Credit Card None, thats a trick, you don't need a credit or itunes card
PS: Sorry for my bad english

How can I make lining number format for opentype fonts in Acrobat?

How can I make lining number format for opentype fonts in Acrobat?

I bought the Max OT font. I want the numbers on the right to look like on the left. I could do that in word, but not in adobe acrobat.

How can I repeat my flash animation (my frames)?

Hi Flash forum members
Can you help me somebody: How can I repeat my flash animation (my frames) many times?
I will be looking forward to hearing from you,
Sultan

It depends on what you mean and how your design is done.
You can copy and paste frames as many times along a timeline as you, though creating a movieclip of one set and placing that to extend the full length of the timeline would produce the same result.
If the problem is that your animation stops when it is done, you need to be sure to not have any code in place that will stop it.

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imac

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 " or connect via thunderbolt to another imac
ann

You will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
Boot Using Command+R keys:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears.

How can I make my movies pro for mac work?

How can I make my movies pro for mac work?
I have downloaded it i click on the icon but I cant make it work

Delete the app using this free utlity > Download AppCleaner for Mac
Then re download the app using the same Apple ID it was originally purchased from. You won't be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
If you still have problems, I located the app developer's website. Contact details for help here > http://www.mymovies.dk/about.aspx

How can I make more email postboxes for iPad2?

How can I make more email maps for the iPad2?

If you are on iOS 5 as your tagline suggests and it's an IMAP type account then you should get an Edit button at the top of the list of folders that you currently have on your email account. If it's a POP type account then you won't get the Edit button.

How can I create an arrow animation for my map

Hi all ,
I am new and would like to create an arrow animation moving to show a path on my map.
how can I show this arrow animation on my jpg image?
do I have to convert my image to gif first?
do you have any tutorial for this so please show me.
it would be better to be a step by step so I can better underestand each step.
Iam using fireworks mx2004.
thanks for any help.
Regards

The JPEG format does not support animation, so if you want to add a moving arrow to a map, you'd need to make an animated GIF or a Flash movie.
If your map is a large image, then adding the frames to make an animated GIF could make very big file and that wouldn't be good. Another thing to keep in mind is that a JPEG image can have millions of colors but an animated GIF can only have 256. If your map is a line art (a drawing), then usually the GIF or PNG formats give you a better result, anyway as the JPEG format introduces noise and color shifts which are normally not noticed on photographs.
I searched Google for "animated gif in fireworks mx" and this tutorial looks like it might be helpful:
http://www.disdatdesigns.com/fireworks/animation1.shtml
In your case, you would share your map across the frames and each new frame would have a different arrow on it.
Good luck!

How can I make my Flash menu SEO Friendly?

Hi all, I have my site at http://www.sgdtechs.com and I really don't like the ugly menu I have there now and I designed a beautiful menu in flash, but I've read online that it's not SEO friendly....
So my question is this, how can I make my menu SEO friendly? Is it even possible?
Thanks for your answers!

Provide an html menu for SEO purposes. If you want to keep the Flash version, consider providing the html at the bottom of the page as text links like you will see in many sites.

How Can I Make a Flash Animation for TV?

Similar Messages

Maybe you are looking for