How can I make a flashplayer video into a quicktime video?

There is a video on youtube in flash player form how do I use it in a power point?

It isn't historic...it is current. 24fps is the film frame rate, and now many cameras can record that as well, either natively or with pulldown (now we get complicated). BUT, my point is, that 30fps is the rate of video...historically and current. Every TV show you watch? 30fps. Even the ones shot on film...at 24fps...air at 30fps.
DVDs...all play at 30fps.
Shane

Similar Messages

How can I make an iPhoto slideshow into a DVD in Lion?

How can I make an iPhoto slideshow into a DVD in Lion?

If you MacBook Pro came with Lion preinstalled then you will not have a copy of iDVD. That's because iDVD and iWeb have been discontinued by Apple and is not longer being included in iLife.
You can purchase a copy from Amazon.com: iLive 11.
If you do have Lion this post will self destruct in 10, 9, 8... seconds and you can follow Terence's directionsl
As for iDVD the following is a recommended workflow to follow;
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How can I make my flash video load faster?

How can I make my flash video created in Flash Pro CC load faster, as of now it takes 2 minutes to load?

This is the source file for video.php:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title> VOPVIU Video
</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css" media="screen">

#flashContent { width:750; height:600; }
</style>
</head>
<body style="background-color:#6E9BD2;">
<center>
<div width="100%" height="100%">
<h3 align="center"> Victims of Political Violence in Uganda <br/> (VOPVIU)
</h3>
<table border="0" width="52%">
   <td width="80%" align="center">
    <em>
     <font color="#FFFFFF">
<strong>
<p> Victims Of Political Violence in Uganda
</p>
Number of views 344       </strong>
</font>
    </em>
   </td>
   <td width="20%" align="right">
    <form action="vopviu.php">
     <div>
<input type="submit" value="Exit Video">
</div>
    </form>
   </td>
</table>
<table width="70%" height="70%" border="0">
<td width="70%" height="70%">
<center><div id="flashContent">
<center>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="750" height="423" id="faddu_vopviu" align="middle">
<param name="movie" value="faddu_vopviu.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#666666" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />

<object type="application/x-shockwave-flash" data="faddu_vopviu.swf" width="750" height="423">
<param name="movie" value="faddu_vopviu.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#666666" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />

<a href="http://www.adobe.com/go/getflash">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>

</object>

</object>
</center>
</div>
</center>
</td>
</center>
</table>
</div>
</center>
</body>
</html>

How can I make my Lion Server into a Lion Workstation?

How can I downgrade my Mac OS X Lion Server to just a standard Mac OS X Lion machine?
I've tried everything including re-installing Lion. When re-installing Lion, it seems to automatically pickup on the fact that this is a Server OS & installs Lion Server OS.
I want to simply downgrade my Lion machine to be running the standard Lion OS instead of Lion Server.
In case you're wondering, this is on my iMac 27" which I originally upgraded from Snow Leopard to Lion, then from Lion to Lion Server.

@Chris BeHanna
You were right for the firewall Issue. I was also running IPSecuritas and I installed Lion Server and the traffic stopped responding on the tunnel, although it connected well.
I figured out that, for some reason, even if the ServerAdmin indicated that the server firewall (my local "new" server, my own machine) was inactive, some rules must had been set during Server.app installation.
Anyway, what I did was activate the firewall, and then, allow all traffic on every ip. You can do that in the ServerAdmin app.
And then the traffic turned back on, on the IPSecuritas tunnels.
The next step would be to be configure rules precisely, but since I am already behind a firewall, I prefer using a "transparent" setting.

How can I make a imovie event into email size segments

I recorded a 24 minute bicycle ride and the reults were good.
I imported the AVI file event into Imovie and the file is now a wopping Mpeg 4 3.78 GB. HD 1280 x 720.
I tried to share the file to email to some friends (or a segment of) but was far to big.
I tried to split clip but no matter what I do that modify menu item remains in light grey and that menu item can not be used.
In a past version I manged to do this on an earlier release. Currently I am using Imovie 10.0.2 which comes up as the currnet version.
I also now have a "Share Failed" alarm "The share operation "Theatre-SUNPRO0003" has failed. Video rendering error: -50" come up every time I use IMovie and I can not get rid of it as it keeps popping up every minute and is very anoying.
I also had the computer slow down considerably and found the problem was Drop box austomatically started uploading the huge file as did ICloud to begin with.
Any assistance would be of great help.
Computer is a 2009 MacPro with 10 gig memory and using OS X 10.9.1 and pretty fast internet connection.
Regards
Barry

iMovie does not allow any editing or splitting of clips in events. You can only do this in a timeline. Consequently if you want to split or shorten a clip you have to do it before importing into iMovie. Quicktime 7 or Quicktime 10 are able to do this.
Your movie is very big becasue of the high resolution. You can make it smaller using a lower resolution. There is a share to email option. I would not share to Theater - it creates several different version s of the movie and slows things down a lot.
If you only want to share the movie at original resolution and not do any editing, why not simply upload it directly to Dropbox (i.e. not via iMovie) , splitting it first if your Dropbox capacity is not big enough?
Geoff.

How can I make iPhone 4S Video's fill the screen when using them in iMovie 11 on My MacBook Pro

Hey Guys.
I am a singer songwriter from he UK.... I recently bought an Iphone4s, Ipad and Mac book pro (haha, apple hero, I know). I have always wanted to make the big jump to apple, just was waiting a little while.
I am thrilled so far, it's all great. But, I use Imovie (i am still getting to grips with it, but the features are amazing) to make videos of me singing coversand original videos for youtube.
The Camera on the iphone4s is great.
But, when I import videos into Imovie11, the videos do not fill the screen in their original form.
In some videos, I use the Ken Burns effect. Now, on the parts of my video when I use this effect, it fills the screen as it should do.
Why do the videos in their untampered form not do this? I have tried importing widescreen, original size, and Large, but it alwys sits in the middle of the screen, fairly thin lookin. It fills the screen when it's on my Iphone, I am very lost.
plesse help.
thanks.

if i can offer any more info please just ask

How can I make a homemade video on iDVD transition from one chapter to the next?

For example, I usually have 4 chapters for my projects. I coach basketball so each chapter represents a quarter. When quarter 1 ends, it goes back to the menu...rather then going right into quarter?

Hi
Not 100% on Your question - but may be this helps.
Play all resp. one chapter at a time
Play All Button
1. There are NO - Play All - button in any version of iDVD
2. It can be faked in several ways
Easiest and most fault proof way is to make a doublet movie containing All and with
Chapters set to match. It will take up x2 space but is easy to understand and produce.
Cons: Tried this in iMovie’11 by Exporting out each part as a full Quality QT.mov then Importing back into new events and putting these into a new project (Play All project). Resulting DVD had Audio that was OK (as parts) - BUT the picture was very bad and standing photo were cut of in height. So the Play All movie has to be created from same material and exactly in the same way as the individual parts + then Chapters has to be set to match.
• It's said that one can put all movies into a Photo/SlideShow and this will also
give the function of a Play All button - Tested - and ONE HAS TO un-cheque - Scale pictures to TV-Safe area else it will be a black frame all around and a small picture !
Mike Evangelist1
You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
3. Using another program to do this e.g.. Roxio Toast™ where there is a Play All button option.
Summary
a. Making a Play All movie with same care as the individual Part movies - gives a very Good Result
b. Using Roxio Toast™ - also an usable way to go
Yours Bengt W

How can I turn my iMovie DVD into a quicktime video? The original is no longer saved on my mac.

I have made a handful of movies through iMovie. Burned them onto DVD and erased the original videos that were created years ago. I would like to take my DVDs and somehow put them onto my Apple TV. I'm assuming the answer would be to create them in quicktime. I'm having trouble and have a bad feelilng this idea can't be done. Please advise.
Thanks.

mbdeady wrote:
… I would like to take my DVDs and somehow put them onto my Apple TV.…
use the free tool Handbrake.
it offers presets to convert DVDs straight into an AppleTV-compliant format.

How can one make a poster video in Adobe Premier Pro- or other play replay function?

I want to embed my video into a blogger layout . You Tube takes it back to You Tube- I want to remain on my blog.
Quick Time instructions require a poster video in order to incorporate play and replay controls.

Agreed. From the top.
all steps followed yielding the following errors:
Scene 1, Layer 'a', Frame 1, Line 9
1119: Access of possibly undefined property PLAYING_STATE_ENTERED through a reference with static type Class.
Scene 1, Layer 'a', Frame 1, Line 3
1119: Access of possibly undefined property PLAYING_STATE_ENTERED through a reference with static type Class.
import fl.video.VideoEvent;
vid.addEventListener(VideoEvent.PLAYING_STATE_ENTERED,f); // line3
function f(e:Event):void{
splash6x3.visible=false; // use the right name
vid.removeEventListener(VideoEvent.PLAYING_STATE_ENTERED,f); // line 9

How can I make two separate photos into a single photo.

I wpuld like to put together two photos into one.
I will appreciate your help.
Thanks.
Vernon

If you have iWork Pages can be used to do what you want.
OT

How can i make a Audio/video Application using JMF

I want to work on media application and currently want to work on JMF.can anyone guide me about some basic to advance level concepts of java media framework.thanks...

you might want to ask questions related to JMF in the JMF forum at http://forum.java.sun.com/forum.jsp?forum=2

How can I make my user input on the same line as the question?

The only way I know of doing it is
System.out.println ("Please enter an uppercase letter of the English Alphabet: ");
letter = dataIn.readLine ();But that makes Please enter an uppercase letter of the English Alphabet:
**User input here, a line down**So how can I make it all fit into one line with this sort of layout:
Please enter an uppercase letter of the English Alphabet: **USER INPUTS HERE, SAME LINE**

change your call from println to print.
check the API docs for this stuff, it tells you everything you need to know.
Good Luck
Lee

How can i make iMovie -- iDVD quality better??

I have search about the idvd quality in this site but i can't solve my problem yet.
I had a sony DV cam which is PC3, Pal. And I use the imovie..import...edit, then use "share" to idvd...then burn...
So I play the finished DVD in a DVD player, i find many many pixels, the quality of the DVD movie inside is like a VCD. In fact, my DV cam is not the lastest and fine quality, but i surpose the DVD movie should be same quality as my DV cam.
So I use another method to test whether my DV cam....(is model too old, something wrong with my DVcam...)
(1) In imovie, use "share" to my DV cam tape
(2) then i use another converter which is borrow from my friend, is like a DVD burner and player. which can convert the DV tape or VHS...directly convert and save in a DVD disc.
(3) after burning the file. the quality is fine, just like what i shoot from my DV cam.
So what's the problem?? Is the convertor between imovie and idvd not good enough??
Or I need to use other methods? for example, use the imovie export a quicktime movie, then use the toaster make the DVD or VCD is better ?
How can i make it better??

select Quicktime and sele4ct full-quality
That is an option, too, but I use that only when troubleshooting.
iMovie automatically creates a reference movie when it saves at iMovie_project/Shared Movies/iDVD/*.mov. Using the ref.mov instead of a full quality export saves time and HD space.
iMovie sends that ref.mov to iDVD when you press the "Create iDVD project" in iMovie's iDVD tab. BUT: DON'T let iMovie render still images if it prompts it: as a very old nasty bug, it will ruin your stills!!
http://www.sjoki.uta.fi/~shmhav/iMovieHD_bugs.html#jaggystills
...how I wish Apple would finally fix that bug...
You can also use that ref.mov as an input for 3rd party apps. MPEG Streamclip and JES Deinterlacer can "see" it inside the package but with some other apps you may need to copy it out of the package 1st.
Notice also that some 3rd party apps (MPEG Streamclip and JES Deinterlacer do this correctly) may unexpectedly honor the deinterlaced playback setting of the ref.mov so you must uncheck that flag with QT Player before using it as in input. Otherwise the output will be deinterlaced.

How can you make the iPod tell the diff between a movie and music video

Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!

Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

How can I keep the edited video which in project into Libray for re-edit ?

How can I keep the edited video which in project into Libray for re-edit later ??
As i used i movie 06 before....
after i imported the videos in to the library, then i can drag the videos to the timeline(now is project)
then edit it.
After that i can just drag all the timeline clips which is edited to the library.So I can keep it for next time if i wanna re-edit.
But Now if did all the editing at the library clips then drag to project, i can not drag the project clips back to library, so how can i keep it for my editing safty?
I do not wanna to edit again the same clips from the library!!! as i need to edit many different short clips together then export to individual videos, and i may need to re-edit.
or i can keep the edited video in project, then i can selected the clips which i willing to export, the rest video who in the project will not be export at the same video? I m wondering....
please help!!! Urgent!!

Just keep the project. Then you can just duplicate the project and make the next set of changes as needed. By duplicating the project, you are not duplicating the event, just the links to the event library.
This way you are not eating up disk space.
Does that help?

How can I make a flashplayer video into a quicktime video?

Similar Messages

Maybe you are looking for